DIN 2285-1-2008 Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 1 Nominal diameter from 1 mm up to 200 mm general purpose《产品几何.pdf

1、July 2008DEUTSCHE NORM Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-N

2、ormen).ICS 17.040.30!$T8“1499721www.din.deDDIN 2285-1Geometrical product specifications (GPS) GO screw ring gauges for ISO metric screw threads Part 1: Nominal diameters from 1 mm up to 200 mm for generalpurposesGeometrische Produktspezifikation (GPS) Gewinde-Gutlehrringe fr Metrisches ISO-Gewinde T

3、eil 1: Gewinde-Nenndurchmesser von 1 mm bis 200 mm, allgemeine AnwendungSupersedesDIN 2285-1:1989-11www.beuth.deDocument comprises 10 pagesIn case of doubt, the German-language original should be consulted as the authoritative text.DIN 2285-1:2008-07 2 Foreword This standard has been prepared by Sub

4、committee NA 152-03-02-07 UA Eindimensionale Lngenprftechnik of Section 3 Geometrische Produktspezifikation und -prfung, with the participation of Technical Committee NA 152-02-03 AA Gewindeprfung, both of the Normenausschuss Technische Grundlagen (NATG) (Fundamental Technical Standards Committee).

5、The DIN 2285 Geometrical product specifications (GPS) GO screw ring gauges for ISO metric screw threads series of standards comprises the following: Part 1: Nominal diameters from 1 mm up to 200 mm for general purposes Part 2: Nominal diameters over 50 mm up to 200 mm for precision engineering Amend

6、ments This standard differs from DIN 2285-1:1989-11 as follows: a) The introductory element “Geometrical product specifications (GPS)” has been added to the title. b) Reference to International Standard ISO 3670:1979 has been deleted as that standard has been withdrawn. c) Terminology has been harmo

7、nized with current standards. d) The standard has been editorially revised. Previous editions DIN 2285: 1927x-07, 1953-04, 1959-07, 1972-04 DIN 2285-1: 1977-09, 1989-11 DIN 2285-1:2008-07 3 1 Scope This standard applies to general purpose GO screw ring gauges designed to check ISO metric screw threa

8、ds with a basic profile as specified in DIN ISO 68-1 and a nominal profile as in DIN 13-19. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest editi

9、on of the referenced document (including any amendments) applies. DIN 13-1, ISO general purpose metric screw threads Part 1: Nominal sizes for coarse pitch threads Nominal diameter from 1 mm to 68 mm DIN 13-2, ISO general purpose metric screw threads Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,3

10、5 mm fine pitch threads Nominal diameter from 1 mm to 50 mm DIN 13-3, ISO general purpose metric screw threads Part 3: Nominal sizes for 0,5 mm fine pitch threads Nominal diameter from 3,5 mm to 90 mm DIN 13-4, ISO general purpose metric screw threads Part 4: Nominal sizes for 0,75 mm fine pitch thr

11、eads Nominal diameter from 5 mm to 110 mm DIN 13-5, ISO general purpose metric screw threads Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads Nominal diameter from 7,5 mm to 200 mm DIN 13-6, ISO general purpose metric screw threads Part 6: Nominal sizes for 1,5 mm fine pitch threads Nom

12、inal diameter from 12 mm to 300 mm DIN 13-7, ISO general purpose metric screw threads Part 7: Nominal sizes for 2 mm fine pitch threads Nominal diameter from 17 mm to 300 mm DIN 13-8, ISO general purpose metric screw threads Part 8: Nominal sizes for 3 mm fine pitch threads Nominal diameter from 28

13、mm to 300 mm DIN 13-9, ISO general purpose metric screw threads Part 9: Nominal sizes for 4 mm fine pitch threads Nominal diameter from 40 mm to 300 mm DIN 13-10, ISO general purpose metric screw threads Part 10: Nominal sizes for 6 mm fine pitch threads Nominal diameter from 70 mm to 500 mm DIN 13-

14、19, ISO general purpose metric screw threads Part 19: Nominal profile DIN 82, Knurls DIN 2239, Geometrical product specifications (GPS) Gauges in dimensional metrology Requirements and testing DIN 2279, Geometrical product specifications (GPS) Gauges for ISO metric screw threads Gauging of internal

15、and external threads Survey, lettering, marking, application DIN ISO 68-1, ISO general purpose metric screw threads Basic profile Part 1: Metric screw threads DIN ISO 1502, ISO general purpose metric screw threads Gauges and gauging DIN 2285-1:2008-07 4 3 Dimensions, designation 3.1 Dimensions Dimen

16、sions shall be as in Figures 1 and 2 and Tables 1, 2 and 3. G GO screw ring gauge GO screw ring gauges of 1 mm up to 100 mm nominal diameter Dimensions in millimetres Key 1 RGE 0,5 to 1 knurl as in DIN 82 Figure 1 GO screw ring gauges of 1 mm up to 100 mm nominal diameter (notation) GO screw ring ga

17、uges of over 100 mm nominal diameter GO screw ring gauges have a reduced major diameter Dimensions in millimetres Key 1 Undercut optional aWith or without RGE 0,5 to 1 knurl as in DIN 82, at manufacturers discretion Figure 2 GO screw ring gauges of over 100 mm nominal diameter (notation) DIN 2285-1:

18、2008-07 5 Table 1 Overall dimensions Dimensions in millimetres Nominal diameter d1d2d31 up to 5 22 5,5 up to 10 32 10,5 up to 15 38 16 up to 20 45 21 up to 25 53 26 up to 32 63 33 up to 40 71 42 up to 50 85 52 up to 60 100 62 up to 70 112 72 up to 80 125 82 up to 90 140 92 up to 100 160 102 up to 11

19、0 170 132 112 up to 120 180 140 122 up to 130 190 150 132 up to 140 200 160 142 up to 150 212 170 152 up to 160 224 180 162 up to 170 236 190 172 up to 180 250 200 182 up to 190 265 212 192 up to 200 280 224 DIN 2285-1:2008-07 6 Table 2 b1 for gauges with coarse pitch thread Dimensions in millimetre

20、s Nominal diameter d1b1a1 up to 1,2 2 1,4 up to 1,8 2,5 2 up to 3 3 3,5 and 4 4 4,5 and 5 5 6 and 7 8 8 and 9 10 10 and 11 12 12 up to 16 16 18 and 20 20 22 and 24 22 27 and 30 24 33 up to 39 32 42 up to 48 40 52 up to 60 45 64 und 68 50 aThe values specified for b1ensure interchange-ability of work

21、pieces up to a length of engagement of about 1,25b1. There is no guarantee for the interchangeability of larger gauges. DIN 2285-1:2008-07 7 Table 3 b1for gauges with fine pitch thread Dimensions in millimetres b1afor a pitch of Nominal diameter d10,2 0,25 0,35 0,5 0,75 1 1,25 1,5 2 3 4 6 1 up to 1,

22、8 2 2,5 2 up to 3 2,5 3 3 3,5 up to 5 2,5 3 3 3 5 5,5 3 3 3 5 6 6 3 4 4 5 6 6,5 up to 10 3 4 4 5 6 8 10 10,5 up to 11 4 6 8 8 11,5 up to 15 4 6 8 8 10 12 16 5 6 8 8 12 17 up to 20 5 6 8 8 12 16 21 up to 25 5 6 8 8 14 18 26 up to 32 6 6 8 8 18 18 24 33 up to 40 6 8 8 12 18 18 24 42 up to 50 6 8 8 12

23、18 18 24 32 52 up to 70 12 12 18 18 24 32 72 up to 80 12 12 18 18 24 32 50 82 up to 100 18 18 24 32 50 102 up to 140 20 28 36 56 142 up to 150 20 28 36 63 152 up to 160 28 36 63 162 up to 200 32 40 63 aSee Table 2, footnote a. DIN 2285-1:2008-07 8 3.2 Designation Designation of a GO screw ring gauge

24、 (G) for checking M20 1,5 ISO metric screw threads made to tolerance class 6g: Ring gauge DIN 2285 G M20 1,5 6g 4 Requirements 4.1 General Technical delivery conditions shall be as in DIN 2239. 4.2 Lettering and marking Lettering and marking shall be as in DIN 2279. 4.3 Gauge dimensions Gauge dimens

25、ions and design shall be as in DIN ISO 1502. DIN 2285-1:2008-07 9 Annex A (informative) Blanks for screw ring gauges of 1 mm up to 100 mm nominal diameter Blanks are hardened and ground and should be finished to final gauge size. The blank sizes specified in Table A.1 are suitable for GO screw ring

26、gauges with the pitches shown in the table. The width of blanks for finer pitches shall be reduced accordingly. Blanks for NO GO screw ring gauges should be chosen from the extremely short, extra short and medium series. Blanks may be relieved or their width reduced, where necessary. Table A.1 Dimen

27、sions for screw ring gauge blanks of 1 mm up to 100 mm nominal diameter Dimensions in millimetres Nominal diameter Outside diameter Extremely shortblanks Extra short blanks Short blanks Medium-size blanks Long blanks Extra long blanks d1d2Pitchab1Pitchab1Pitchab1Pitchab1Pitchab1Pitchab1from 1 up to

28、2,6 22 0,4; 0,45 3 over 2,6 up to 5 22 0,45; 0,5 3 0,6 up to 0,8 5 over 5 up to 10 32 0,75 6 1 8 1,25 10 1,5 12 over 10 up to 15 38 0,5 6 0,75; 1 8 1,25 10 1,5 12 1,75; 2 16 over 15 up to 20 45 0,5 6 0,75; 1 8 1,25; 1,5 12 2 16 2,5 20 over 20 up to 25 53 0,5 6 0,75; 1 8 1,5 14 2 18 2,5; 3 22 over 25

29、 up to 32 63 0,5 6 0,75; 1 8 1,5; 2 18 3 24 3,5 24 over 32 up to 40 71 0,5; 0,75 8 1 12 1,5; 2 18 3 24 3,5; 4 32 over 40 up to 50 85 0,5; 0,75 8 1 12 1,5; 2 18 3 24 4 32 4,5; 5 40 over 50 up to 60 100 0,75; 1 12 1,5; 2 18 3 24 4 32 5; 5,5 45 over 60 up to 70 112 0,75; 1 12 1,5; 2 18 3 24 4 32 6 50 o

30、ver 70 up to 80 125 0,75; 1 12 1,5; 2 18 3 24 4 32 6 50 over 80 up to 90 140 1,5; 2 18 3 24 4 32 6 50 over 90 up to 100 160 1,5; 2 18 3 24 4 32 6 50 aPitches are taken from preferred series 1, 2 and 3 as in DIN 13 Parts 1 to 10. DIN 2285-1:2008-07 10 Bibliography DIN 2278, Dirt grooves on screw thread gauges for screw threads with ISO metric profile ISO 13715, Technical drawings Edges of undefined shape Vocabulary and indication on drawings