DIN 3965-2-1986 Tolerancing of bevel gears tolerances for individual parameters《伞齿轮啮合公差 第2部分 专用参数公差》.pdf

1、UDC 621.833.2 : 621.753.1 DEUTSCHE NORM August 1986 Tolerancing of bevel gears Tolerances for individual parameters DIN 3965 Part 2 I m Toleranzen fr Kegelradverzahnungen; Toleranzen fr Abweichungen einzelner Bestimmungsgren Supersedes September 1981 edition. In keeping with current practice in stan

2、dards published by the International Organization for Stan - difference between adjacent pitches, f, ; - cumulative pitch error, Fp; - deviation from radial run-out, F,. Continued on pages 2 to 16 Bevth Verlag GmbH, Berlin. has the exclusive right ai sale for German Standards (DIN-Normen). DIN 3965

3、Part 2 Engl. Price group 1 i 06.87 Sales No. O1 11 Page 2 DIN 3965 Part 2 Mean reference diameter, dm I in mm Over upto 10 Over O upto 50 Over 50 upto 125 Over lZ5 upto 280 Normal module, rirnn: 1 mm to 2 mm Error fp for tolerance class 112 3 4 5 6 7 8 9 10 11 12 1,5 2,5 3,5 4,5 6.5 9,0 13 18 28 45

4、72 115 2,O 2,5 3.5 5,O 6.5 93 13 19 30 47 76 121 2,0 2,5 3,5 5,O 7,O I 10 14 20 32 51 91 130 2,O 3,O 4,O 5.5 73 11 1 15 21 34 54 87 139 Mean reference diameter, in mm dm r Over upto 10 Over lo upto 50 Over 50 upto 125 Over 125 upto 280 Error f, for tolerance class 1 2 3 4 5 6 7 8 9 10 11 12 2.0 3,O

5、4,O 5.5 8.0 11 16 22 35 56 90 145 2,O 3,O 43 6,O 8,5 12 17 23 37 59 95 152 2,5 3,5 4.5 6,5 9,0 13 18 25 40 63 102 163 2.5 33 5,O 7.0 9.5 14 19 27 43 68 109 175 DIN 3965 Part 2 Page 3 Mean reference diameter, dm r in mm Over upto 10 Over 10 upto 50 Over upto 125 Over 125 upto 280 I Normal module, mmn

6、 : 1 mm to 2 mm I Error Fp for tolerance class 1 2 3 4 5 6 7 ai9 10 11 12 3,5 5,O 7,O 9,5 13 19 26 36 58 93 149 239 5,O 7,O 10 14 19 27 38 , 53 85 135 217 347 6,5 9.0 13 18 25 34 4a 67 io8 172 276 441 73 11 15 21 29 40 57 79 127 203 325 520 Tolerances in km Page 4 DIN 3965 Part 2 50 I 2,0 Over upto

7、125 Over 125 upto 280 Over 280 i upto 560 2.0 2.5 Normal module, mmn: over 2 mm up to and including 3,55 mm 3,O 4,O 5,5 8.0 11 15 21 34 54 87 I 139 93 149 3.0 4.0 6.0 8,5 12 16 23 36 58 3,5 45 6,5 9,0 13 18 25 39 63 101 161 Tolerances in lm Mean reference diameter, Error f, for tolerance class I 1 1

8、 1 1 1 1 1 1 1 1 Over 560 Over 1000 up to 2500 DIN 3965 Part 2 Page 5 Normal module, mmn: over 2 mm up to and including 3.55 mm Tolerances in pm Error Fp for tolerance class up to 1000 Over 1000 up to 1600 Over 1600 Page 6 DIN 3965 Part 2 Normal moduie, mmn: over 3,55 mm up to and including 6 mm Tol

9、erances in pm Error fp for tolerance class 2,O 3.0 4.5 6,O 8.5 12 17 24 38 61 97 155 Over 50 upto 125 Over 125 upto 280 Over 280 upto 560 Over 560 2,5 3,5 4,5 6.5 9.0 13 18 25 40 64 103 164 2.5 3,5 5.0 7,O 10 14 19 27 43 69 110 177 3,O 4,O 5,5 7,5 11 15 21 29 47 75 120 192 up to 1000 up to 1600 Over

10、 1600 up to 2500 3,O 4,O 6.0 8,5 12 16 23 32 51 81 130 208 Over Ooo L 1 DIN 3965 Part 2 Page 7 1 L 6,O 7,5 9.0 10 12 13 - Normal module, mmn: over 3,55 mrn up to and including 6 mm 2 8,5 11 12 14 16 18 80 94 108 122 135 127 204 150 240 173 277 196 313 216 346 Tolerances in pm Mean refe re nce diamet

11、er, dm, in rnm Error Fp for tolerance class 12 c - 410 - 522 Over 1 upto 10 Over 10 upto 50 Over 50 upto 125 12 I 16 I 23 I 32 I 45 I 63 I 100 I 160 257 15 326 57 67 77 87 61 5 Over 125 upto 280 17 384 443 710 Over 280 upto 560 20 - 23 - 25 50 1 80 1 Over 560 upto 1000 Over 1000 up to 1600 96 553 88

12、5 Over 1600 up to 2500 Mean reference diameter, in mm dm I Error F, for tolerance class 8 9 10 11 12 - 50 70 99 138 193 up to upto 125 Over 125 upto 280 60 84 117 164 230 68 96 134 188 263 78 109 152 213 298 43 49 55 Over 280 upto 560 Over 560 I up to 1000 62 87 121 170 238 333 68 - 95 I 134 I 187 I

13、 262 I 366 Over 1000 Over 1600 9.0 I 13 I 18 I 25 1 1 Page 8 DIN 3965 Part 2 Normal module, mmn: over 6 mm up to and including 10 mm in mm 1 2 - - Over 1 upto lo Over 10 upto 50 - 2.5 3,5 Tolerances in pm 3 5,O upto 125 Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 upto 1600 Over

14、 1600 up to 2500 I 25 I 3,5 1 5,O Over 50 upto 125 3,5 4.5 6,5 9,0 13 18 25 35 55 88 141 226 3,5 5.0 7,O 93 13 19 26 36 58 93 149 238 3,5 5,O 7,O 10 14 20 28 39 62 99 159 254 4,O 5.5 7,5 11 15 21 30 42 67 107 170 273 4.0 6.0 83 12 16 23 32 45 72 115 183 293 45 65 9,O 13 18 25 34 48 77 124 198 316 1

15、2,5 1 4.0 I 5,5 Over 125 upto 280 1 3.0 1 4,O 1 55 Over 280 upto 560 Over 560 I 3,O I 4.5 I 6,O up to 1000 I I I Over Ooo 1 35 I 45 1 6,5 up to 1600 Over 1600 up to 2500 I 3.5 I 5.0 I 7,O Error f, for tolerance class reference diameter, Mean I Error f, for tolerance class DIN 3965 Part 2 Page 9 9,5

16、11 12 14 15 Normal module, mmn : over 6 mm up to and including 10 mm 13 19 26 37 52 72 101 162 259 414 662 15 22 30 42 59 83 117 187 298 478 764 17 24 34 48 67 94 132 211 337 539 863 19 27 38 53 74 104 145 233 372 596 953 21 30 41 58 81 113 159 254 406 650 1040 Mean reference diameter, dm I in mm Ov

17、er 1 upto 10 Over 10 upto 50 Over 50 upto 125 Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 up to 1600 Over 1600 up to 2500 Tolerances in pm Error Fp for tolerance class Page 10 DIN 3965 Part 2 Over 50 upto 125 Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 up

18、to 1600 Over 1600 upto2m0 I Normal module, mmn: over 10 mm up to and including 16 mm I 3,O 4,5 6,O 8.5 12 17 24 33 53 85 137 219 3,5 43 6,5 9,0 13 18 25 35 56 89 143 228 - 3,5 5,O 7,O 9,5 13 19 26 37 59 94 150 240 35 5,O 7,O 10 14 20 28 39 62 100 160 255 4,O 5,5 73 11 15 21 30 41 66 106 170 272 4,O

19、6,O 8.0 12 I 16 23 32 44 71 113 181 290 1 Over 50 up to 125 Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 up to 1600 Over 1600 up to 2500 30 42 67 108 172 276 4.0 515 1 8,O 11 15 21 16 22 31 44 70 112 180 288 4,O 6,O 8,O 11 4.5 6.0 8,5 12 17 24 33 46 74 119 190 303 45 6,5 9,0 13

20、18 25 35 49 79 126 201 322 19 27 37 52 84 134 214 343 50 7!J 93 14 15 20 28 40 56 89 143 229 366 5*5 785 lo DIN 3965 Part 2 Page 1 1 Mean reference diameter, dm in mm Over 1 upto 10 Normal module, mmn: over 10 mm up to and including 16 mm 1 2 - 17 20 23 26 29 32 Tolerances in pm 24 34 47 66 92 147 2

21、36 377 28 40 55 77 108 173 278 444 33 46 64 89 125 200 320 512 37 51 72 101 141 276 361 578 41 57 80 111 156 250 399 639 44 62 a7 122 io 272 436 697 I I Over IO I Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 up to 1600 Over 1600 up to 2500 upto 50 I 14 17 12 19 13 21 ,5 23 16 Ov

22、er 50 1 8.5 1 12 upto 125 Error Fp for tolerance class 12 I 603 710 820 925 1 O22 1116 I Page 12 DIN 3965 Part 2 Over 50 upto 125 Over 25 upto 280 Over 280 upto 560 Over 560 up to 1000 up to 1600 up to 2500 Over Ooo Over l6O0 Normal module, mmn: over 16 mm up to and including 25 mm 4,O I 53 8,O 11 1

23、5 22 30 42 68 108 173 277 4,O 6,O 8.0 11 16 22 31 44 70 112 179 286 4,5 6,O 8.5 12 17 23 33 46 73 117 187 299 4,5 6.5 9.0 12 I 17 24 34 48 77 122 196 314 5,O 6,5 9,5 13 18 26 36 50 81 129 206 330 5,O 7.0 10 14 19 27 38 53 85 136 217 348 Over 50 1 5,O upto 125 Over 125 5,o upto 280 5,5 Over 280 upto

24、560 Over 560 5,s up to 1000 6,O Over 1000 up to le00 Over l6O0 1 6,5 up to 2500 I 7,O 10 14 19 27 38 53 85 137 I 219 350 73 10 14 20 28 39 55 88 141 226 362 7.5 11 15 21 29 41 58 92 147 236 377 8,O 11 16 22 31 43 60 97 155 248 396 8,5 12 17 23 32 45 64 102 163 261 417 9,0 12 17 24 34 48 67 107 172 2

25、75 440 I DIN 3965 Part 2 Page 13 251 296 342 386 426 Normal module, mmn: over 16 mm up to and including 25 mm 402 474 547 617 682 Tolerances in pm 19 reference diameter, Mean 1 dm I in mm 27 37 52 73 102 143 200 280 393 550 Error Fp for tolerance class 7 8 Over 1 upto 10 Over 10 upto 50 e 70 98 157

26、Over 50 1 9,5 I 13 1 18 1 26 1 36 1 50 upto 125 644 759 875 988 Over 125 1 11 1 15 1 22 1 30 I 42 I 59 upto 280 83 116 185 214 24 1 267 Over 280 I 13 I 18 I 25 I 35 1 49 I 68 upto 560 134 - 151 - 167 95 108 119 Over 560 1 14 1 20 I 28 I 39 I 55 I 77 up to 1000 1092 Over Ooo I 16 I 22 I 31 I 43 I 61

27、I 85 up to 1600 130 182 Over 1 17 1 24 1 34 I 47 1 66 I 93 up to 2500 29 1 465 I 744 1 1191 Mean reference diameter, in mm dm, Error F, for tolerance class Over 1 upto 10 Over 10 upto 50 Over 50 upto 125 Over 125 upto 280 95 10 - 12 - 13 Over 280 upto 560 Over 560 up to 1000 Over 1000 up to 1600 Ove

28、r 1600 up to 2500 14 Page 14 DIN 3965 Part 2 Over 125 upto 280 Over 280 upto 560 Over 560 up to 1000 Over 1000 up to 1600 Over 1600 up to 2500 - Normal module, mmn: over 25 mm up to and including 50 mm 6.0 8.5 12 16 23 32 44 62 100 159 255 408 6,O 8.5 12 17 23 33 46 64 103 164 263 421 6,5 9,0 12 17

29、24 34 47 66 106 170 272 435 6,5 9,0 13 18 25 35 49 69 110 176 282 452 7.0 9,5 13 19 26 37 51 72 115 183 294 470 DIN Xi65 Part 2 Page 15 Mean reference diameter, in mm dln I Over 1 upto 10 Over 10 upto 50 Over 50 upto 125 Normal module, mmn: over 25 mrn up to and including 50 mm 1 2 3 4 1 ,/ Toleranc

30、es in prn I 1 Mean reference diameter, Error F, for tolerance class Over upto 280 1 12 1 17 1 23 1 33 Over 280 I 14 1 19 I 27 I 38 upto 560 Over 560 1 16 1 22 1 30 I 43 up to 1000 Over Ooo I 17 I 24 I 34 I 47 up to 1600 Over l6O0 I 19 1 26 I 37 I 51 up to 2500 Error Fp for tolerance class Page 16 DI

31、N 3965 Part 2 Standards referred to DIN 3965 Part 1 Tolerancing of bevel gears; basic concepts DIN 3971 Terminology and parameters for bevel gears and bevel gear pairs Previous editions DIN 3965 Part 2: 09.81. Amendments The following amendments have been made in comparison with the September 1981 e

32、dition. a) The status of the standard is no longer that of a preliminary standard. b) The standard has been editorially revised. Explanatory notes DIN 3965 Parts 1 to 4 provide only information on the gear blank and on errors that can be measured by conventional means. The finer tolerances cannot ye

33、t be measured under production conditions. Nevertheless, the tables shown in DIN 3965 Parts 2 and 3 cover all diameter ranges, the fields crossed out indicating that for these diameter ranges no tolerances can currently be specified. In future, more advanced gauging and calculation methods may allow

34、 errors to be dealt with, which have not as yet been specified, such as profile errors, and more information to be provided regarding the accuracy of bevel gears. The parameters (see clause 3) have been defined in DIN 3971, the aim of which was to include as many quantities as possible without regar

35、d for the current feasibility or difficulty of their measurement. The structure of the tolerance system for bevel gears has been brought into tine with that for cylindrical pars. The relationship between the parameters are the same, except for an overall shift in the tolerance system by one tolerance class. The tolerance system proposed may thus serve as an adequate basis for international discussion. International Patent Classification F 16 H 55/08 F 16 H 55/17