DIN 482-2002 Natural stone kerbs《天然石料的街道路边石》.pdf

1、ICS 93.080.20Straenbordsteine aus NatursteinIn keeping with current practice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.Ref. No. DIN 482 : 2002-04English price group 04 Sales No. 010411.03DEUTSCHE NORM Apr

2、il 2002482 No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Translation by DIN-Sprachendienst.In case of doubt, the G

3、erman-language original should be consulted as the authoritative text.Natural stone kerbsContinued on pages 2 to 4.ForewordThis standard has been prepared by Technical Committee 10.02.01 Pflastersteine, Platten und Bordsteine Betonprodukte of the Normenausschuss Bauwesen (Building and Civil Engineer

4、ing Standards Committee).It supplements DIN EN 1343, which does not specify dimensions and profiles for natural stone kerbs, butwhich covers all other requirements for them.AmendmentsThis standard differs from the September 1988 edition in that table 3, dealing with the finishing of kerbs, hasbeen o

5、mitted, and a reference to DIN EN 1343 has been included.Previous editionsDIN 482: 1920-10, 1927-10, 1928-04, 1941-07, 1958-02, 1964-07, 1974-11, 1988-09.All dimensions are in millimetres.1 ScopeIn conjunction with DIN EN 1343, this standard covers half-battered and square natural stone kerbs. Ifspe

6、cifications other than those set out here are required for kerbs for special applications (e.g. bridges),these shall be subject to agreement.2 Normative referenceThis standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the

7、appropriate places in the text, and the titles of the publications arelisted below. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this standard only when incorporated in it by amendment or revision. For undated references, thelatest edition of the p

8、ublication referred to applies.DIN EN 1343 Kerbs of natural stone for external paving Requirements and test methodsSupersedes partsof September 1988 edition(withdrawn in March 2000)Page 2DIN 482 : 2002-043 Types, dimensions and designation3.1 Straight kerbsType A (half-battered)Figure 1: Half-batter

9、ed kerbs in sizes 1 to 5 (see table 1 for dimensions)Half-battered kerbs shall be designated using the number of this standard, the type (A), and the size (1, 2, 3,4 or 5).When ordering, the total length and type of stone required shall be given in addition to the designation.Designation of a size 2

10、 half-battered (A) kerb:Kerb DIN 482 A 2Top faceBackjointingfaceBed faceFront jointing faceSize 6Size 7Type B (square)Figure 2: Square kerbs in sizes 6 and 7 (see table 1 for dimensions)Square kerbs shall be designated using the number of this standard, the type (B), and the size (6 or 7). Whenorder

11、ing, the total length and type of stone required shall be given in addition to the designation.The designation of size 6 kerbs shall include their exact width, and that of size 7 kerbs shall include their widthrange.Designation of a size 7 square (B) kerb with a width, b, ranging from 140 to 150 mm:

12、Kerb DIN 482 B 7 140 150Page 3DIN 482 : 2002-04Table 1: Kerb types and dimensionsDeviation of topType and sizeWidth, b, in mm Height, h, in mm Length, l, in mm1) face from horizontal,n, in mmAB1 300 250 72 180 250 3 180 300 800 to 1 500 4 150 250 5 150 300 6140250 to 280 500 to 1 500120 40 to 150 7

13、120 to 140 250 to 300 500 to 1 500 100 to 120 1) In the case of kerbs of sizes 1 to 5, 10% of the consignment may be stones of between 500 mm and800 mm in length.3.2 Radius kerbs (cf. figure 3)Radius kerbs are classified as follows:a) half-battered convex radius kerbs (KAa);b) half-battered concave

14、radius kerbs (KAi);c) square convex radius kerbs (KBa);d) square concave radius kerbs (KBi).Outer radius kerbsRoad axisInner radius kerbFigure 3: Outer and inner radius kerbsThe designation of radius kerbs shall include the number of this standard, the kerb type (KAa, KBa, KAi, or KBi),size (1, 2, 3

15、, 4, 5 or 6), width and radius.When ordering, the total length and type of stone required shall be given in addition to the designation.Page 4DIN 482 : 2002-04Designation of a square concave radius kerb (KBi) of size 61) of a width, b, of 140 mm and a radius, r, of 15 m:Radius kerb DIN 482 KBi 6 140 15Table 2: Radius of kerbsKerb type and sizeRadius, r, in mKAa and KAi KBa and KBi1 2 3 4 0,5 to 255 6 7All other dimensions are as for straight kerbs.1) The total length of kerbs in a consignment shall be calculated from the lengths of the kerbs measured at theroadside edge.