DIN CEN ISO TS 16401-2-2012 en Electronic fee collection - Evaluation of equipment for conformity to ISO TS 17575-2 - Part 2 Abstract test suite (ISO TS 16401-2 2012) English versi.pdf

1、Juli 2012 Normenausschuss Automobiltechnik (NAAutomobil) im DINDKE Deutsche Kommission Elektrotechnik Elektronik Informationstechnik im DIN und VDEPreisgruppe 11DIN Deutsches Institut fr Normung e. V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr

2、Normung e. V., Berlin, gestattet.ICS 03.220.20; 35.240.60Zur Erstellung einer DIN SPEC knnen verschiedene Verfahrensweisen herangezogen werden: Das vorliegende Dokument wurde nach den Verfahrensregeln einer Vornorm erstellt.!$u“1888297www.din.deDDIN CEN ISO/TS 16401-2Elektronische Gebhrenerhebung Ko

3、nformittsevaluierung von Einrichtungen nach ISO/TS 17575-2 Teil 2: Abstrakte Prfreihe (ISO/TS 16401-2:2012);Englische Fassung CEN ISO/TS 16401-2:2012Electronic fee collection Evaluation of equipment for conformity to ISO/TS 17575-2 Part 2: Abstract test suite (ISO/TS 16401-2:2012);English version CE

4、N ISO/TS 16401-2:2012Perception du tlpage valuation de conformit de lquipement lISO/TS 17575-2 Partie 2: Suite dessai abstraite (ISO/TS 16401-2:2012);Version anglaise CEN ISO/TS 16401-2:2012Alleinverkauf der Spezifikationen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 18 SeitenDIN

5、SPEC 70666DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 2 Nationales Vorwort Dieses Dokument (CEN ISO/TS 16401-2:2012) wurde vom technischen Komitee CEN/TC 278 Straen-transport und Verkehrstelematik“ ausgearbeitet, dessen Sekretariat vom NEN (Niederlande) gehalten wird, in Zusammenarbeit mit dem t

6、echnischen Komitee ISO/TC 204 Intelligent transport systems“. Das zustndige deutsche Normungsgremium ist der Gemeinschaftsarbeitsausschuss NA 052-02-71 GA Straenverkehrtelematik“ des Normenausschusses Automobiltechnik. Das Prsidium des DIN hat mit seinem Beschluss 1/2004 festgelegt, dass von dem in

7、den Regeln der europischen Normungsarbeit von CEN/CENELEC verankerten Grundsatz, wonach Europische Normen in den drei offiziellen Sprachen Deutsch, Englisch und Franzsisch verffentlicht werden, in begrndeten Ausnahmefllen abgewichen und auf die deutsche Sprachfassung verzichtet werden kann. Dieser T

8、eil der ISO/TS 16401 ist Teil einer Normenreihe, die Interoperabilitt von autonomen Systemen fr die elektronische Gebhrenerhebung (EFC) untersttzt. Diese Normenreihe umfasst ISO/TS 17575 Teil 1 bis Teil 4, welche die EFC Inhaltsdaten, deren Gebhrenberichte und die Nutzung der Kommunikationsinfra-str

9、uktur festlegt. Diese Norm legt Anwendungsprotokoll Schnittstellen und deren Zugriff fest und wird somit von EFC Systemherstellern zu Konformittsprfungen herangezogen. Eine DIN SPEC nach dem Vornorm-Verfahren ist das Ergebnis einer Normungsarbeit, das wegen bestimmter Vorbehalte zum Inhalt oder wege

10、n des gegenber einer Norm abweichenden Aufstellungsverfahrens vom DIN noch nicht als Norm herausgegeben wird. Zur vorliegenden DIN SPEC wurde kein Entwurf verffentlicht. Erfahrungen mit dieser DIN SPEC sind erbeten vorzugsweise als Datei per E-Mail an wernvda.de in Form einer Tabelle. Die Vorlage di

11、eser Tabelle kann im Internet unter http:/www.din.de/stellungnahme abgerufen werden; oder in Papierform an den Normenausschuss Automobiltechnik, Behrenstr. 35, 10117 Berlin. DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 3 Nationaler Anhang NA (informativ) Begriffe Fr die Anwendung dieses Dokuments

12、 gelten die Begriffe und Festlegungen der ISO/TS 17575-1 und die folgenden Begriffe. 3.1 Konformittsprfung (en: conformance testing) Test in der Tiefe um festzustellen, ob die zu testende Implementierung eine konforme Implementierung ist ISO/IEC 9646-1, Definition 3.3.23 3.2 Vertrag (en: contract) A

13、usdruck einer bereinkunft zwischen zwei oder mehreren Verhandlungspartnern zur Nutzung der Straen Infrastruktur ISO 14906:2011, Definition 3.7 ANMERKUNG Ein Vertrag legt Verpflichtungen, Erlaubnisse und Verbote fr die betroffenen Objekte fest. 3.3 Front End Anwendung (en: Front End application) Teil

14、 des Front-Ends oberhalb der Applikation Protokoll Schnittstelle (API) ISO/TS 16401-1:2011, Definition 3.2 3.4 Zu testende Implementierung (en: implementation under test) IUT Implementierung einer oder mehrerer Kommunikationsprotokoll Schichten hin zur nchst hheren Nutzer/ Anbieter Beziehungsebene,

15、die Teil des zu untersuchenden Echtzeit Systems whrend der Tests ist ISO/IEC 9646-1:2011, Definition 3.3.43 3.5 Dienstanbieter (en: service provider) Betreiber, welcher vom Kunden Gebhren akzeptiert und im Gegenzug dem Nutzer Straennutzungsdienste liefert ANMERKUNG Aus der ISO 14906:2004. 3.6 Zu tes

16、tendes System (en: system under test) SUT Echtzeit System, das die zu testende Implementierung beinhaltet ISO/IEC 9646-1:2011, Definition 3.3.103 DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 4 3.7 Testfall (en: test case) ein abstrakter oder durchfhrbarer Testfall ISO/IEC 9646-1:2011, Definition

17、3.3.107 3.8 Mauterheber (en: toll charger) legale Instanz zur Mauterhebung in Fahrzeugen innerhalb eines Mautgebiets ISO/TS 17574:2009, Definition 3.27 TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2012 ICS 35.240.60; 03.220.20 This Technical Specification (CEN/TS) wa

18、s approved by CEN on 30 January 2012 for provisional application. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European

19、 Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final

20、decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

21、g, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref.

22、 No. CEN ISO/TS 16401-2:2012: E EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN ISO/TS 16401-2 English Version Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2

23、012) Perception du tlpage - valuation de conformit de lquipement lISO/TS 17575-2 - Partie 2: Suite dessai abstraite (ISO/TS 16401-2:2012) Elektronische Gebhrenerhebung - Konformittsevaluierung von Einrichtungen nach ISO/TS 17575-2 - Teil 2: Abstrakte Prfreihe (ISO/TS 16401-2:2012) Contents Page Fore

24、word . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions 5 4 Abbreviations 6 5 Abstract Test Method (ATM) . 7 5.1 Implementations Under Tests 7 5.1.1 Front-End (FE) . 7 5.1.2 Back-End (BE) . 7 5.2 Test architecture 7 5.3 Protocol Implementation Extra Information for T

25、esting (PIXIT) 7 6 Untestable Test Purposes (TP) . 7 7 ATS data structures . 8 7.1 Implementation of proposed in annex D.2. API Definition in C 8 7.2 Common data types . 8 8 External functions 8 9 Message filtering . 8 10 ATS naming conventions 8 10.1 Definition naming conventions . 9 10.2 Test Case

26、 identifier . 10 10.3 TTCN-3 modules identifier . 10 Annex A (informative) TTCN-3 Library modules for FE and BE 11 Annex B (informative) PIXIT Proforma for FE and BE . 12 Bibliography 14 2DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 CEN ISO/TS 16401-2:2012 (E) Foreword This document (CEN ISO/TS 1

27、6401-2:2012) has been prepared by Technical Committee CEN/TC 278 “Road Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to th

28、e CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L

29、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. ISO/TS 16401 consists of the following parts, under the general title Electronic fee collection Evaluation of equipment for conformity t

30、o ISO/TS 17575-2: Part 1: Test suite structure and test purposes Part 2: Abstract test suite transport and traffic telematics , the secretariat of which is held by NEN, in collaboration with Technical Committee ISO/TC 204 Intelligent transport systems . ”“ ”3DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2

31、012-07 CEN ISO/TS 16401-2:2012 (E) Introduction This part of ISO/TS 16401 is part of a set of standards that supports interoperability of autonomous EFC-systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context data, their charge reports and their use of communication infrastruct

32、ure. Within the suite of EFC standards this conformance evaluation procedure defines the process and tests for conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-2. This part of ISO/TS 16401 is intended to assess Front End Communications API and Front E

33、nd Application capabilities, assess Front End Communications API and Front End Application behaviour, serve as a guide for Front End Communications API and Front End Application conformance evaluation and type approval, achieve comparability between the results of the corresponding tests applied in

34、different places at different times, and facilitate communications between parties. This part of ISO/TS 16401 is based on ISO/TS 17575-2, and the ISO/IEC 9646 family of standards on conformance test methodology. 4DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 CEN ISO/TS 16401-2:2012 (E) 1 Scope Thi

35、s part of ISO/TS 16401 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End Communications API and Front End Application to ISO/TS 17575-2. The objective of the present document is to provide a basis for conformance tests for Front End Communications API and Front End Appl

36、ication in Electronic Fee Collection based on autonomous on-board equipment (OBE) to enable interoperability between different equipment supplied by different manufacturers. The present abstract test suite is directly derived from ISO/TS 17575-2. 2 Normative references The following referenced docum

37、ents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/TS 17575-1, Electronic fee collection Application interface definition for

38、autonomous systems Part 1: Charging ISO/TS 17575-2, Electronic fee collection Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers ISO/TS 17575-3, Electronic fee collection Application interface definition for autonomous systems Part 3: Con

39、text data 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/TS 17575-1 and the following apply. 3.1 conformance testing testing the extent to which an IUT is a conforming implementation ISO/IEC 9646-1, definition 3.3.23 3.2 contract expression of an ag

40、reement between two or more parties concerning the use of the road infrastructure ISO 14906:2011, definition 3.7 NOTE A contract specifies obligations, permissions and prohibitions for the objects involved. 5DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 CEN ISO/TS 16401-2:2012 (E) 3.3 Front End ap

41、plication part of the Front End above the API ISO/TS 16401-1:2011, definition 3.2 3.4 implementation under test IUT implementation of one or more OS1 protocols in an adjacent user/provider relationship, being that part of a real open system which is to be studied by testing ISO/IEC 9646-1, definitio

42、n 3.3.43 3.5 service provider operator that accepts the users payment means and in return provides a road-use service to the user NOTE Taken from ISO 14906:2004. 3.6 system under test SUT real open system in which the IUT resides ISO/IEC 9646-1, definition 3.3.103 3.7 test case an abstract or execut

43、able test case ISO/IEC 9646-1, definition 3.3.107 3.8 toll charger legal entity charging toll for vehicles in a toll domain ISO/TS 17574:2009, definition 3.27 4 Abbreviations For the purposes of this document, the abbreviations given in ISO/TS 16401-1 and the following apply. EUT Equipment Under Tes

44、t IUT Implementation Under Test PIXIT Protocol Implementation Extra Information for Testing SCS Semiconductor Characterization System SUT System Under Test TC Test Case 6DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 CEN ISO/TS 16401-2:2012 (E) 5 Abstract Test Method (ATM) This clause describes the

45、 ATM used to test the layers at the FE side and at the BE side. 5.1 Implementations Under Tests 5.1.1 Front-End (FE) The part(s) of the toll system where usage data for an individual user are collected, processed and delivered to the Back End. The Front End comprises the on-board equipment and optio

46、nally a proxy. 5.1.2 Back-End (BE) Generic name for the computing and communication facilities of the Service Provider and/or the Toll Charger. 5.2 Test architecture The implementation under test is either the FE or the BE. The System under test comprises also the communication sub-layer, which is n

47、ecessary to perform the IUT tests. The tester executes the TTCN-3 test cases of the present Test Specification, running on an emulated communication sub-layer. The figure below describes the test architecture. Communication Sub-layerTTCN-3Test executionTESTER SYSTEM UNDER TESTIUTTS 17575-2(FE or BE)

48、eaPort pcoFigure 1 Test system architecture 5.3 Protocol Implementation Extra Information for Testing (PIXIT) The supplier of the Front End and Back End, respectively, is responsible for providing a Protocol Implementation Extra Information for Testing (PIXIT). The supplier of the Front End and the

49、Back End shall complete a PIXIT; see Annex B for the proforma. 6 Untestable Test Purposes (TP) This clause gives a list of TPs which are not implemented in the Abstract Test Suite due to the chosen Abstract Test Method or other restrictions. 7DIN CEN ISO/TS 16401-2 (DIN SPEC 70666):2012-07 CEN ISO/TS 16401-2:2012 (E) Table 1 Untestable TPs Test purpose Reason(empty) (empty) NOTE Currently no untestable TPs have been identified. 7