1、April 2014 Translation by DIN-Sprachendienst.English price group 32No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、23.140; 23.160!%1,r“2140979www.din.deDDIN EN 1012-3Compressors and vacuum pumps Safety requirements Part 3: Process compressors;English version EN 1012-3:2013,English translation of DIN EN 1012-3:2014-04Kompressoren und Vakuumpumpen Sicherheitsanforderungen Teil 3: Prozesskompressoren;Englische Fass
3、ung EN 1012-3:2013,Englische bersetzung von DIN EN 1012-3:2014-04Compresseurs et pompes vide Prescriptions de scurit Partie 3: Compresseurs de procd;Version anglaise EN 1012-3:2013,Traduction anglaise de DIN EN 1012-3:2014-04www.beuth.deDocument comprises 107 pagesIn case of doubt, the German-langua
4、ge original shall be considered authoritative.03.14 DIN EN 1012-3:2014-04 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 1012-3:2013) has been prepared by Technical Committee CEN/TC 232 “Compressors, vacuum pumps” (Secretariat
5、: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-08-11 AA Prozessgaskompressoren of Section Kompressoren und Drucklufttechnik. Representatives of manufacturers and users
6、of compressors, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed
7、 on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying t
8、his standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Where the
9、International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1012-3 November 2013 ICS 23.140; 23.160 English Version Compressors and vacuum pumps - Safety requirements - Part 3
10、: Process compressors Compresseurs et pompes vide - Prescriptions de scurit -Partie 3: Compresseurs de procd Kompressoren und Vakuumpumpen - Sicherheitsanforderungen - Teil 3: Prozesskompressoren This European Standard was approved by CEN on 8 September 2013. CEN members are bound to comply with the
11、 CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management
12、 Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status a
13、s the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
14、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All
15、rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1012-3:2013 EEN 1012-3:2013 (E) 2 Contents Page Foreword 5 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and definitions 10 4 List of significant hazards Hazard analysis and risk
16、 assessment . 16 5 Safety requirements and/or protective measures . 22 5.1 General . 22 5.2 Mechanical safety . 23 5.2.1 General . 23 5.2.2 Guards . 23 5.2.3 Fluid injection 24 5.2.4 Loss of stability . 25 5.2.5 Lifting and transportation of compressor units and parts . 25 5.2.6 Slip, trip and fall
17、30 5.2.7 Speed . 30 5.2.8 Loss of main energy supply or short term power interruption 31 5.2.9 Reverse running of the compressor . 31 5.3 Electrical safety. 32 5.3.1 Generally applicable . 32 5.3.2 Protection from overload . 32 5.3.3 Protection from live parts 32 5.3.4 Protection from lightning . 32
18、 5.3.5 Portable and skid-mounted compressor units 32 5.4 Control systems 33 5.4.1 General . 33 5.4.2 Failure of safety related control system energy supply . 33 5.4.3 Start/restart 33 5.4.4 Manual suspension of safety functions . 34 5.4.5 Electrical control systems . 35 5.4.6 Pneumatic and/or hydrau
19、lic control systems 36 5.5 Thermal safety . 36 5.6 Noise 37 5.7 Materials and substances processed, used or exhausted . 37 5.7.1 General . 37 5.7.2 Reactive gases 38 5.7.3 Oxygen compressors . 38 5.7.4 Acetylene compressors . 40 5.7.5 Compressors for H2S containing gases 41 5.7.6 Nitrogen and other
20、inert gases 41 5.7.7 Access closures to process gas containing parts 41 5.7.8 Compressor shaft seal systems 42 5.7.9 Static seals (Gaskets) for piping . 42 5.7.10 Micro-organisms, biological and microbiological substances 43 5.7.11 Compressors units driven by internal combustion engines 44 5.8 Fire
21、and explosion 44 5.8.1 General . 44 5.8.2 Electrostatic phenomena . 45 5.8.3 Oil-flooded rotary compressor units 45 DIN EN 1012-3:2014-04 EN 1012-3:2013 (E) 3 5.8.4 Oil-lubricated reciprocating process compressor units . 46 5.8.5 Compressor units driven by internal combustion engines 46 5.9 Ergonomi
22、c principles 46 5.9.1 General . 46 5.9.2 Manual handling of compressor units and parts . 47 5.9.3 Portable and skid-mounted compressor units . 47 5.10 Integrity of machinery parts and other functional requirements . 47 5.10.1 Generally applicable 47 5.10.2 Snow, wind and seismic loads . 47 5.10.3 Br
23、eak-up during operation . 48 5.10.4 Low temperature operation 48 5.10.5 Liquid shock 49 5.10.6 Coolant system 49 5.10.7 Process gas temperature rise 49 5.10.8 Turbo compressor . 49 5.11 Pressure limiting devices . 50 5.11.1 General . 50 5.11.2 Installation of pressure limiting devices . 50 5.11.3 De
24、sign specifications of pressure relief devices . 51 5.11.4 Multi stage compressor units 51 5.11.5 Single and multi stage turbo compressors 51 5.12 Information and warning devices 51 6 Verification of safety requirements and/or protective measures . 52 6.1 Pressure testing 52 6.1.1 General . 52 6.1.2
25、 Acetylene compressors 52 6.2 Leak tightness test for hazardous gases 53 6.3 Test of electrical loops 53 6.4 Test of control systems 53 6.5 Noise . 53 6.5.1 General . 53 6.5.2 Sound power level of compressors used outdoors 54 6.6 Stability of portable compressor units 54 6.7 Structure of verificatio
26、n 54 7 Information for use 59 7.1 General requirements . 59 7.2 Accompanying documents. 60 7.2.1 Instruction handbook (Operating Manual) 60 7.2.2 Service instructions 66 7.2.3 Dismantling 68 7.2.4 Qualification . 68 7.3 Markings, signs and written warnings 68 7.3.1 Generally applicable 68 7.3.2 Comp
27、ressor unit enclosures 69 7.3.3 Portable and skid-mounted compressor units . 69 7.3.4 Markings (in particular, data plate) 69 Annex A (informative) Graphical symbols 71 Annex B (informative) Measure to ensure a safety function while testing a safety device (example) . 78 B.1 Shutdown Override Switch
28、es . 78 B.2 Monitoring 78 Annex C (informative) Guide to the application of current standards to the functional safety on safety related control of process compressors or compressor units . 79 C.1 Introduction 79 C.2 Scope 79 C.3 Standard and code references . 79 C.4 Standard abbreviations . 80 C.5
29、Risk reduction process and functional safety 81 DIN EN 1012-3:2014-04 EN 1012-3:2013 (E) 4 C.6 Relationship between EN 1012-3 and the standards for functional safety . 82 C.7 Process of functional safety 84 C.7.1 General . 84 C.7.2 Risk Assessment 85 C.7.3 Allocation of safety function to protection
30、 layers . 90 C.7.4 Safety Requirements Specification. 91 C.7.5 Design and engineering . 91 C.7.6 Installation commissioning and validation 93 C.7.7 Verification 93 C.7.8 Assessment of functional safety . 93 C.8 Risk assessment of compressor and auxiliary system 94 C.9 Responsibilities 95 C.9.1 End u
31、ser and manufacturer . 95 C.9.2 Compressor or compressor unit manufacturer . 95 C.9.3 Example 1, using EN 61508, EN 61511 . 97 C.9.4 Example 2, using EN 61508, EN 61511 . 99 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .
32、 101 Bibliography . 102 DIN EN 1012-3:2014-04 EN 1012-3:2013 (E) 5 Foreword This document (EN 1012-3:2013) has been prepared by Technical Committee CEN/TC 232 “Compressors, vacuum pumps and their systems”, the secretariat of which is held by SIS. This European Standard shall be given the status of a
33、 national standard, either by publication of an identical text or by endorsement, at the latest by May 2014, and conflicting national standards shall be withdrawn at the latest by May 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
34、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relatio
35、nship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 1012, Compressors and vacuum pumps, is composed of the following parts: Part 1: Air compressors; Part 2: Vacuum pumps; Part 3: Process compressors (the present document). The responsibility of CEN/TC
36、 232 includes coordination of safety standards with CEN/TC 182, Refrigerating systems, safety and environmental requirements, and CEN/TC 234, Gas infrastructure. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
37、this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov
38、akia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1012-3:2014-04 EN 1012-3:2013 (E) 6 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are in
39、dicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A and B standards, the provisions of this type C standard take precedence over the provisions of the other standards for machines that have been designed and built accordi
40、ng to the provisions of this type C standard. When published in 1996, Part 1 of EN 1012 applied to all types of compressor. The standard is now divided into 3 parts with Part 1 addressing compressors for compressed air, nitrogen and inert gases and Part 3 addressing compressors for process gases. Pa
41、rt 2 continues to address vacuum pumps. Separating requirements for process gas compressors from those for compressors for air, nitrogen and other inert gases was considered a practical move so that the requirements for one type of compressor could be changed without affecting the complete standard.
42、 Where texts parts of EN 1012-3 are identical with EN 1012-1:2010, these are identified and formatted in italics. If common requirements for functional safety would be applied to all process compressors, the variety in the application of process compressors may cause significantly different levels o
43、f residual risk. Therefore, in addition to the requirements of this standard, the application of risk assessment may be required for safety related control systems in the case of particular applications to specify performance levels and/or safety integrity levels for related aspects of functional sa
44、fety. Informative Annex C has been included to provide guidance on risk assessment for related aspects of functional safety, including the determination of safety integrity levels and/or performance levels. The manufacturer of the compressor is responsible for carrying out such a risk assessment and
45、 applying appropriate preventive measures. These tasks are outside the scope of this standard. DIN EN 1012-3:2014-04 EN 1012-3:2013 (E) 7 1 Scope This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge)
46、, an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantli
47、ng and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This part of EN 1012 includes under the general term compressor units those machines which c
48、omprise: the compressor; a drive system including the prime mover; any component or device supplied which is necessary for operation. This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN. The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site. Excluded are: refrigerant compressors used in refrigerating systems or heat pumps for which the safet
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1