DIN EN 10216-4-2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4 Non-alloy and alloy steel tubes with specified low temperature properties Ge.pdf

1、March 2014 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、77.140.75; 23.040.10!%,#“2099300www.din.deDDIN EN 10216-4Seamless steel tubes for pressure purposes Technical delivery conditions Part 4: Non-alloy and alloy steel tubes with specified low temperatureproperties;English version EN 10216-4:2013,English translation of DIN EN 10216-4:2014-03Nahtlose Sta

3、hlrohre fr Druckbeanspruchungen Technische Lieferbedingungen Teil 4: Rohre aus unlegierten und legierten Sthlen mit festgelegten Eigenschaften beitiefen Temperaturen;Englische Fassung EN 10216-4:2013,Englische bersetzung von DIN EN 10216-4:2014-03Tubes sans soudure en acier pour service sous pressio

4、n Conditions techniques de livraison Partie 4: Tubes en acier non alli et alli avec caractristiques spcifes bassetemprature;Version anglaise EN 10216-4:2013,Traduction anglaise de DIN EN 10216-4:2014-03SupersedesDIN EN 10216-4:2004-07www.beuth.deDocument comprises 32 pagesIn case of doubt, the Germa

5、n-language original shall be considered authoritative.02.14DIN EN 10216-4:2014-03 2 A comma is used as the decimal marker. National foreword This document (EN 10216-4:2013) has been prepared by Technical Committee ECISS/TC 110 “Steel tubes and fittings for steel tubes” (Secretariat: UNI, Italy). The

6、 responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Iron and Steel Standards Committee), Working Committee NA 021-00-09-04 UA Rohre aus warmfesten oder kaltzhen Sthlen. This standard specifies technical requirements for seamless non-alloy and alloy steel tub

7、es of circular cross-section for pressure purposes, intended to be used at low temperatures. Amendments This standard differs from DIN EN 10216-4:2004-07 as follows: a) specifications relating to inspection documents have been brought in line with EN 10204:2004, i.e. inspection documents 2.2, 3.1 an

8、d 3.2 are now to be issued; b) for non-destructive testing, reference is made to EN ISO 10893; c) for tensile testing, reference is made to EN ISO 6892 and for the impact test, reference is made to EN ISO 148-1; d) for flattening test, drift expanding test, ring expanding test and ring tensile test,

9、 reference is made to EN ISO 8492, EN ISO 8493, EN ISO 8495 and EN ISO 8496; e) the standard has been editorially revised. Previous editions DIN 17173: 1985-02 DIN EN 10216-4: 2002-08, 2004-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10216-4 December 2013 ICS 23.040.10; 77.140.75 Superse

10、des EN 10216-4:2002English Version Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties Tubes sans soudure en acier pour service sous pression - Conditions techniques de livraison - Partie 4: Tu

11、bes en acier non alli et alli avec caractristiques spcifies basse temprature Nahtlose Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 4: Rohre aus unlegierten und legierten Sthlen mit festgelegten Eigenschaften bei tiefen Temperaturen This European Standard was approved by C

12、EN on 17 August 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard

13、s may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif

14、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice

15、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Mana

16、gement Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10216-4:2013 EContents Page Foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 6 4 Symbols 6 5 Classificat

17、ion and designation . 6 5.1 Classification . 6 5.2 Designation 7 6 Information to be supplied by the purchaser . 7 6.1 Mandatory information 7 6.2 Options . 7 6.3 Example of an order 8 7 Manufacturing process . 8 7.1 Steelmaking process . 8 7.2 Tube manufacture and delivery conditions 8 8 Requiremen

18、ts . 9 8.1 General . 9 8.2 Chemical composition 10 8.3 Mechanical properties . 12 8.4 Appearance and internal soundness. 14 8.5 Straightness . 14 8.6 Preparation of ends . 14 8.7 Dimensions, masses and tolerances. 15 9 Inspection . 19 9.1 Types of inspection . 19 9.2 Inspection documents. 19 9.3 Sum

19、mary of inspection and verification testing 20 10 Sampling . 20 10.1 Frequency of tests . 20 10.2 Preparation of samples and test pieces 21 11 Verification test methods 22 11.1 Chemical analysis 22 11.2 Tensile test . 22 11.3 Flattening test 22 11.4 Ring tensile test . 23 11.5 Drift expanding test .

20、 23 11.6 Ring expanding test 24 11.7 Impact test 24 11.8 Leak tightness test 24 11.9 Dimensional inspection 25 11.10 Visual examination 25 11.11 Non-Destructive Testing . 25 11.12 Material identification 26 11.13 Retests, sorting and reprocessing 26 12 Marking . 26 12.1 Marking to be applied 26 12.2

21、 Additional marking 26 13 Protection . 27 Annex A (informative) Technical changes from the previous edition . 28 2EN 10216-4:2013 (E)DIN EN 10216-4:2014-03 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC . 29 Bibliography 30

22、EN 10216-4:2013 (E) DIN EN 10216-4:2014-03 3Foreword This document (EN 10216-4:2013) has been prepared by Technical Committee ECISS/TC 110 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, eit

23、her by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE

24、NELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 10216-4:2002. For the list of the most significant technical changes that have been made in this new edition, see Annex A. This document has been prepared under a mandate given to CEN by th

25、e European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of the following parts, under the genera

26、l title “Seamless steel tubes for pressure purposes Technical delivery conditions“: Part 1 :Non-alloy steel tubes with specified room temperature properties; Part 2 :Non-alloy and alloy steel tubes with specified elevated temperature properties; Part 3 :Alloy fine grain steel tubes; Part 4: Non-allo

27、y and alloy steel tubes with specified low temperature properties (the present document); Part 5 :Stainless steel tubes. Another European Standard series covering tubes for pressure purposes is: EN 10217: Welded steel tubes for pressure purposes Technical delivery conditions. According to the CEN-CE

28、NELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

29、Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 10216-4:2013 (E)DIN EN 10216-4:2014-03 41 Scope This European Standard specifies the technical delivery con

30、ditions in two test categories for seamless tubes of circular cross section, with specified low temperature properties, made of non-alloy and alloy steel. NOTE Once this standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to

31、the Essential Safety Requirements (ESR) of Directive 97/23/EC is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the desi

32、gn requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account the subsequent manufacturing processes which may affect properties of the

33、 base materials. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (in

34、cluding any amendments) applies. EN 10020, Definition and classification of grades of steel EN 10021, General technical delivery conditions for steel products EN 10027-1, Designation systems for steels - Part 1: Steel names EN 10027-2, Designation systems for steels - Part 2: Numerical system EN 100

35、52, Vocabulary of heat treatment terms for ferrous product EN 10168:2004, Steel products - Inspection documents - List of information and description EN 10204:2004, Metallic products - Types of inspection documents EN 10220, Seamless and welded steel tubes - Dimensions and masses per unit length EN

36、10266, Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards CEN/TR 10261, Iron and steel - Review of available methods of chemical analysis EN ISO 148-1:2010, Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 1

37、48-1:2009) EN ISO 377:2013, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2013) EN ISO 2566-1, Steel - Conversion of elongation values Part 1: Carbon and low-alloy steels (ISO 2566-1) EN ISO 6892-1:2009, Metallic materials - Tensile te

38、sting - Part 1: Method of test at room temperature (ISO 6892-1:2009) EN ISO 8492:2004, Metallic materials - Tube - Flattening test (ISO 8492:1998) EN ISO 8493:2004, Metallic materials - Tube - Drift expanding test (ISO 8493:1998) EN 10216-4:2013 (E) DIN EN 10216-4:2014-03 5EN ISO 8495:2004, Metallic

39、 materials - Tube - Ring expanding test (ISO 8495:1998) EN ISO 8496:2004, Metallic materials - Tube - Ring tensile test (ISO 8496:1998) EN ISO 10893-1, Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes

40、for the verification of hydraulic leak-tightness (ISO 10893-1) EN ISO 10893-3,Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transv

41、erse imperfections (ISO 10893-3) EN ISO 10893-8, Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8) EN ISO 10893-10, Non-destructive testing of steel tubes - Part 10: Automated full

42、 peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10) EN ISO 14284:2002, Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO

43、14284) ISO 11484:2009, Steel products - Employers qualification system for non-destructive testing (NDT) personnel 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020, EN 10021, EN 10052, EN 10266 and the following apply. 3.1 test category classific

44、ation that indicates the extent and level of inspection and testing 3.2 employer organization for which a person works on a regular basis Note 1 to entry: The employer may be either the tube manufacturer or supplier or a third party organization providing Non-Destructive Testing (NDT) services. 4 Sy

45、mbols For the purposes of this document, the symbols given EN 10266 and the following apply. TC test category 5 Classification and designation 5.1 Classification In accordance with the classification system in EN 10020, the steel grades P 215NL, P 255QL and P265NL are classified as non-alloy quality

46、 steels and the other steel grades are classified as alloy special steels. EN 10216-4:2013 (E)DIN EN 10216-4:2014-03 65.2 Designation 5.2.1 For the tubes covered by this document, the steel designation consists of: the number of this Part of EN 10216; plus either the steel name in accordance with EN

47、 10027-1; or the steel number allocated in accordance with EN 10027-2. 5.2.2 The steel name of non-alloy steel grades is designated by: the capital letter P for pressure purposes; the indication of the specified minimum yield strength at room temperature, expressed in MPa (see Table 4); the symbol o

48、f the heat treatment for the steel grade concerned (see Table 1); the symbol L for low temperature. 5.2.3 The steel name of alloy-steel grades is designated by the chemical composition (see Table 2) and the symbols for the heat treatment, where specified in column 1 and footnote a) of Table 1. 6 Inf

49、ormation to be supplied by the purchaser 6.1 Mandatory information The following information shall be supplied by the purchaser at the time of enquiry and order: a) the quantity (mass or total length or number); b) the term “tube“; c) the dimensions (outside diameter D and wall thickness T)(see Table 6); d) the designation of the steel grade in accordance with this Part of EN 10216 (see 5.2); e) the test category for non-alloy steel (see 9.3). 6.2 Options A number of options are specified in this Part of EN 10216 and these are li