DIN EN 1034-6-2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6 Calender German version EN 1034-6 2005+.pdf

1、July 2010 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8

2、5.100!$iX“1705753www.din.deDDIN EN 1034-6Safety of machinery Safety requirements for the design and construction of paper makingand finishing machines Part 6: Calender (includes Amendment A1:2009)English translation of DIN EN 1034-6:2010-07Sicherheit von Maschinen Sicherheitstechnische Anforderungen

3、 fr Konstruktion und Bau von Maschinen derPapierherstellung und Ausrstung Teil 6: Kalander (enthlt nderung A1:2009)Englische bersetzung von DIN EN 1034-6:2010-07Scurit des machines Prescriptions de scurit pour la conception et la construction de machines de fabricationet de finition du papier Partie

4、 6: Calandres (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 1034-6:2010-07SupersedesDIN EN 1034-6:2006-03See start of validitywww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 28 pages07.10 DIN EN 1034-6:2010-07 A comma is used

5、 as the decimal marker. Start of validity This standard takes effect on 1 July 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery Safety” (Secretariat: DIN, Germany). The responsible Germ

6、an body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-23-01 AA Druck- und Papier-maschinen of Section Druck- und Papiermaschinen. Representatives of manufacturers of paper making and finishing machines, and of

7、the employers liability insurance association for papermakers contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009) and the new “Machinery Directive”, D

8、irective 2006/42/EC, which took effect on 29 December 2009, and which apply to paper making and finishing machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once

9、this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in this

10、document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 1034-6:2006-03 as follows: a) The standard has been brought in line with the new Machinery Directive 2006/42/EC. b) An informative Annex ZB dealing with

11、 the relationship between this European Standard and the essential requirements of EU Directive 2006/42/EC has been included. Previous editions DIN EN 1034-6: 2006-03 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1034-6:2005+A1 December 2009 ICS 85.100 Supersedes EN 1034-6:2005English Versi

12、on Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender Scurit des machines - Prescriptions de scurit pour la conception et la construction de machines de fabrication et de finition du papier - Partie 6: Calandres Sicherh

13、eit von Maschinen - Sicherheitstechnische Anforderungen fr Konstruktion und Bau von Maschinen der Papierherstellung und Ausrstung - Teil 6: Kalander This European Standard was approved by CEN on 4 November 2005 and includes Amendment 1 approved by CEN on 17 November 2009. CEN members are bound to co

14、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Manag

15、ement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as t

16、he official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slova

17、kia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide

18、for CEN national Members. Ref. No. EN 1034-6:2005+A1:2009: EEN 1034-6:2005+A1:2009 (E) 2 Contents Page Foreword 4Introduction .51 Scope 52 Normative references 53 Terms and definitions .74 List of hazards 95 Safety requirements and/or measures . 125.1 General . 125.2 Start-up warning devices . 125.3

19、 Emergency stop devices and braking systems . 125.4 Web threading and sheet feeding . 135.5 Workplaces, access stairs, catwalks, passageways . 135.6 Isolation and energy dissipation, prevention of unexpected start-up 135.7 Facilities and measures for make-ready and repair 145.8 Safety measures for c

20、leaning operations 145.9 Control systems and actuators . 145.10 Noise 155.11 Integrated lighting. 155.12 Ergonomic principles . 155.13 Electrical equipment . 165.14 Hydraulic equipment 165.15 Pneumatic equipment 165.16 Winding and unwinding units 165.17 Roll stacks . 185.18 Rider rolls 185.19 Liftin

21、g platforms and their means of access . 185.20 Control systems, emergency stopping, energy isolation of lifting platforms 205.21 Lifting platform load control, driving units and drive systems . 215.22 Web cutting devices . 215.23 Power transmission elements . 215.24 Heating systems . 215.25 Traversi

22、ng measuring instruments. 215.26 Web trimming 215.27 Doctor blades 215.28 General requirements for safety devices . 226 Verification of compliance with safety requirements and/or measures . 227 Information for use . 237.1 General . 237.2 Specific marking . 237.3 Specific information in the instructi

23、on handbook . 23Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC 25Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ 26DIN EN 1034-6:2010-07 EN 1034-

24、6:2005+A1:2009 (E) 3 Figures Figure 1 Off-line calender (example) 8 Figure 2 On-line calender (example) . 9 Figure 3 Example of an access to a lifting platform in upper position 19 Tables Table 1 List of significant hazards . 9 Table 2 Methods used to verify safety requirements and/or measures . 22

25、DIN EN 1034-6:2010-07 EN 1034-6:2005+A1:2009 (E) 4 Foreword This document (EN 1034-6:2005+A1:2009) has been prepared by Technical Committee CEN/TC 198 “Printing and paper machinery - Safety”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, eit

26、her by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CE

27、NELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 17 November 2009. This document supersedes EN 1034-6:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Th

28、is document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.

29、“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

30、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 1034-6:2010-07 EN 1034-6:2005+A1:2009 (E) 5 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1:2003. The

31、 machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. For machines that have been designed and built according to the provisions of this type C standard, the following stipulation applies: When provisio

32、ns of this type C standard are different from those which are stated in type A or B standards or from provisions made in !EN 1034-1:2000+A1:2010“, the provisions of this type C standard take precedence over the provisions of the other standards. 1 Scope This European Standard applies to calenders in

33、tended for use in paper making and finishing and shall be used together with !EN 1034-1:2000+A1:2010“. It deals with all significant hazards listed in clause 4. Related safety requirements and/or measures are described in clause 5. It does not cover hazards connected with lifting operations required

34、 for changing rolls, inserting reels into the unwinding unit, removal of reels from the winding unit and heating systems for heating calender rolls This European Standard is not applicable to calenders that have been manufactured before the date of publication of this standard. 2 Normative reference

35、s The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. prEN 81-41:2004, Safety rules for the construct

36、ion and installation of lifts Special lifts for the transport of persons and goods Part 41: Vertical lifting platforms intended for use by persons with impaired mobility. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 349:1993, Safety o

37、f machinery Minimum gaps to avoid crushing of parts of the human body. EN 418:1992, Safety of machinery Emergency stop equipment Functional aspects Principles for design. EN 563:1994, Safety of machinery Temperatures of touchable surfaces Ergonomics data to establish temperature limit values for hot

38、 surfaces. EN 894-1:1997, Safety of machinery Ergonomic requirements for the design of displays and control actuators Part 1: General principles for human interactions for displays and control actuators. EN 894-2:1997, Safety of machinery Ergonomic requirements for the design of displays and control

39、 actuators Part 2: Displays. DIN EN 1034-6:2010-07 EN 1034-6:2005+A1:2009 (E) 6 EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards. EN 954-1:1996, Safety of machinery Safety related parts of control systems Part 1: General princip

40、les for design. EN 982:1996, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics. EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics. EN 999:1998, Safety of machinery The positioning of protective e

41、quipment in respect of approach speeds of parts for the human body. !EN 1034-1:2000+A1:2010“, Safety of machinery Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements. EN 1037:1995, Safety of machinery Prevention of unexpected start

42、-up. EN 1050:1996, Safety of machinery Principles for risk assessment. EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection. EN 1127-1:1997, Explosive atmospheres Explosion prevention and protection Part 1: Basic concepts and methodology.

43、EN 1760-1:1997, Safety of machinery Pressure-sensitive safety devices Part 1: General principles for the design and testing of pressure-sensitive mats and pressure-sensitive floors. EN 1760-2:2001, Safety of machinery Pressure-sensitive safety devices Part 2: General principles for the design and te

44、sting of pressure-sensitive edges and pressure-sensitive bars. EN 13023:2003, Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment Accuracy categories 2 and 3. EN 60204-1:1997, Safety of machinery Electrical equipment Part 1: General requirements (I

45、EC 60204-1:1997). EN 60024-11:2000, Safety of machinery Electrical equipment Part 11: High-voltage equipment for voltages above 1 000 V AC or 1 500 V DC, but not more than 36 kV (IEC 60204-11:2000). EN 61000-6-2:2001, Electromagnetic compatibility (EMC) Part 6-2: Generic standard Immunity Part 2: In

46、dustrial environment (IEC 61000-6-2:1999, modified). EN 61496-1:2004, Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests (IEC 61496-1:2004, modified). prEN 61496-2:2005, Safety of machinery Electro-sensitive protective equipment Part 2: Particular requi

47、rements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2005). EN ISO 11957:1996, Acoustics Determination of sound insulation performance of cabins Laboratory and in situ measurements (ISO 11957:1996). EN ISO12100-1:2003, Safety of machinery Basic concepts General

48、principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003). DIN EN 1034-6:2010-07 EN 1034-6:2005+A1:2009 (E) 7 EN ISO 12100-2:2003, Safety of machinery Basic concepts General principles for design Part 2: Technical principles and specifications (ISO 12100-2:2003). EN ISO 14122-1:2001, Safety of machinery Permanent means of access to machines and industrial plants Part 1: Choice of a fixed means of access between two levels (ISO 14122-1:2001). EN ISO 14122-2:2001, Safety of machinery Permanent means of access to machines and industrial plants Part 2: