1、April 2014 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、13.340.20!%09“2130422www.din.deDDIN EN 1078Helmets for pedal cyclists and for users of skateboards and rollerskates;English version EN 1078:2012+A1:2012,English translation of DIN EN 1078:2014-04Helme fr Radfahrer und fr Benutzer von Skateboards und Rollschuhen;Englische Fassung EN 1078:2012+A1:2012
3、,Englische bersetzung von DIN EN 1078:2014-04Casques pour cyclistes et pour utilisateurs de planches roulettes et de patins roulettes;Version anglaise EN 1078:2012+A1:2012,Traduction anglaise de DIN EN 1078:2014-04SupersedesDIN EN 1078:2013-11www.beuth.deIn case of doubt, the German-language origina
4、l shall be considered authoritative.Document comprises 26 pages 03.14 DIN EN 1078:2014-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2014-04-01. National foreword This standard includes safety requirements within the meaning of the Prod
5、uktsicherheitsgesetz (ProdSG) (German Product Safety Act). This document (EN 1078:2012+A1:2012) has been prepared by Technical Committee CEN/TC 158 “Head protection” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Sport- und Freizei
6、tgert, Working Committee NA 112-04-02 AA Sportschutzhelme. Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety) and reference to it has been published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesan
7、stalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed that helmets for pedal cyclists and for users of skateboards and roller skates which comply with this standard fulfil the relevant health and safety requirements. Wher
8、e they comply with the provisions laid down in Section 5 of the Product Safety Act, such products may then be marked with the GS mark (German “safety tested” mark) as awarded to the manufacturer by an authorized “GS organization”. The amendment relates only to Annex ZA “Relationship between this Eur
9、opean Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment”. Amendments This standard differs from DIN EN 1078:2012-04 as follows: a) Annex ZA has been editorially revised; b) the standard has been editorially revised. Compared with DIN EN 1078:2013-11, th
10、e following corrections have been made to the German version only and therefore do not affect the English text: a) the National foreword has been corrected with regard to EU Directive 89/686/EEC: there was no amendment to this Directive; b) the definition of 3.4 has been revised: the word Teile has
11、been replaced by komplette Baugruppe (complete assembly); c) in Subclause 5.1, the word Gren has been replaced by Grenbezeichnungen (size designations); d) in Subclause 5.4.3.2 “Base”, it has been added aus einem Guss (shall be monolithic); e) in Subclause 5.4.3.5 “Accelerometer and measuring assemb
12、ly”, it has been added muss in der Lage sein (shall be capable of). Previous editions DIN EN 1078: 1997-04, 2006-03, 2012-04, 2013-11 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1078:2012+A1 October 2012 ICS 13.340.20 Supersedes EN 1078:2012English Version Helmets for pedal cyclists and for
13、 users of skateboards and roller skates Casques pour cyclistes et pour utilisateurs de planches roulettes et de patins roulettes Helme fr Radfahrer und fr Benutzer von Skateboards und Rollschuhen This European Standard was approved by CEN on 17 December 2011 and includes Amendment 1 approved by CEN
14、on 19 July 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
15、 be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t
16、o the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
17、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Av
18、enue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1078:2012+A1:2012: EEN 1078:2012+A1:2012 (E) 2 Contents Page Foreword . 3Introduction 41 Scope 52 Normative references . 53 Terms and definitions
19、. 54 Requirements 64.1 Materials . 64.2 Construction 64.3 Field of vision 74.4 Shock absorbing capacity 94.5 Durability 94.6 Retention system 94.6.1 General . 94.6.2 Chin strap 94.6.3 Fastening device . 94.6.4 Colour . 94.6.5 Strength . 94.6.6 Effectiveness . 94.6.7 Ease of release 105 Testing 105.1
20、 Headforms . 105.2 Inspection and determination of mass . 105.3 Number of samples and sequence of tests 105.4 Determination of shock absorbing capacity 115.4.1 Test area 115.4.2 Conditioning 115.4.3 Apparatus 125.4.4 Procedure 155.5 Determination of retention system strength and ease of release 155.
21、5.1 Apparatus 155.5.2 Procedure 165.6 Determination of retention system effectiveness 165.6.1 Apparatus 165.6.2 Procedure 185.7 Determination of field of vision . 195.8 Test report . 196 Marking 197 Information supplied by the manufacturer . 20Annex A (informative) Alternative procedure for artifici
22、al ageing . 21Annex B (informative) Significant technical changes between this European Standard and EN 1078:1997 . 22Annex ZA !(informative)“ Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment 23Bibliography . 24DINEN
23、1078:2014-04EN 1078:2012+A1:2012 (E) 3 Foreword This document (EN 1078:2012+A1:2012) has been prepared by Technical Committee CEN/TC 158 “Head protection“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an id
24、entical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held r
25、esponsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 19 July 2012. This document supersedes !EN 1078:2012“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared
26、under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex B provides details of significan
27、t technical changes between this European Standard and the previous edition. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic,
28、Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 107
29、8:2014-04 EN 1078:2012+A1:2012 (E) 4 Introduction The protection given by a helmet depends on the circumstances of the accident and wearing a helmet cannot always prevent death or long term disability. A proportion of the energy of an impact is absorbed by the helmet, thereby reducing the force of t
30、he blow sustained by the head. The structure of the helmet may be damaged in absorbing this energy and any helmet that sustains a severe blow needs to be replaced even if damage is not apparent. The technical committee which has prepared this European Standard realizes that it is of importance for t
31、he wearers comfort and psychrometric performance that a helmet is ventilated. At the time the standard was prepared no method for measuring the ventilating capacity of a helmet was recognized. For that reason no requirements concerning ventilation or heat transmission have been introduced. Manufactu
32、rers of helmets are urged to design their helmets to encourage a flow of air over the wearers head. Pedal cyclists helmets and helmets for users of skateboards and roller skates are fitted with a retention system to retain the helmet on the head. However, there may be a foreseeable risk that helmets
33、 of young children could become trapped and thereby cause a risk of strangulation of the child. In such cases an impact protection helmet for young children (see EN 1080) should be used. DINEN 1078:2014-04EN 1078:2012+A1:2012 (E) 5 1 Scope This European Standard specifies requirements and test metho
34、ds for helmets worn by users of pedal cycles, skateboards and roller skates. Requirements and the corresponding methods of test are given for the following: construction, including field of vision; shock absorbing properties; retention system properties, including chin strap and fastening devices; m
35、arking and information. 2 Normative references !The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docu
36、ment (including any amendments) applies.“ EN 960:2006, Headforms for use in the testing of protective helmets ISO 6487, Road vehicles Measurement techniques in impact tests Instrumentation 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 prote
37、ctive helmet item to be worn on the head and intended to absorb the energy of an impact, thus reducing the risk of injury to the head 3.2 helmet type category of helmets which does not differ in such essential respects as the materials or dimensions or construction of the helmet, of the retention sy
38、stem or of the protective padding 3.3 padding 3.3.1 protective padding material used to absorb impact energy 3.3.2 comfort padding lining material provided for the wearers comfort 3.3.3 sizing padding lining material used for adjustment of the helmet size DINEN 1078:2014-04EN 1078:2012+A1:2012 (E) 6
39、 3.4 retention system complete assembly by means of which the helmet is maintained in position on the head including any devices for adjustment of the system or to enhance the wearers comfort 3.5 chin-strap part of the retention system consisting of a strap that passes under the wearers jaw to keep
40、the helmet in position 3.6 basic plane of the human head plane at the level of the external ear opening (external auditory meatus) and the lower edge of the eye sockets (orbits) 3.7 basic plane of a headform plane relative to the headform that corresponds to the basic plane of the human head 3.8 ref
41、erence plane construction plane parallel to the basic plane of the headform at a distance from it which is a function of the size of the headform 3.9 test area area of the helmet in which impact tests may be conducted which corresponds to the minimum protected area of the human head 4 Requirements 4
42、.1 Materials For those parts of the helmet coming into contact with the skin, the material used should be known not to undergo appreciable alteration from contact with sweat or with substances likely to be found in toiletries. Materials shall not be used which are known to cause skin disorders. 4.2
43、Construction The helmet normally consists of a means of absorbing impact energy and means of retaining the helmet on the head in an accident. The helmet should be durable and withstand handling. The helmet shall be so designed and shaped that parts of it (visor, rivets, ventilators, edges, fastening
44、 device and the like) are not likely to injure the user in normal use. NOTE Helmets should: have low weight; be ventilating; be easy to put on and take off; be usable with spectacles; DIN EN 1078:2014-04 EN 1078:2012+A1:2012 (E) 7 not significantly interfere with the ability of the user to hear traf
45、fic noise. 4.3 Field of vision When tested in accordance with 5.7 there shall be no occultation in the field of vision bounded by angles as follows (see Figure 1): horizontally: min. 105 from the longitudinal vertical median plane to the left and right hand sides; upwards: min. 25 from the reference
46、 plane; downwards: min. 45 from the basic plane. DINEN 1078:2014-04EN 1078:2012+A1:2012 (E) 8 Dimensions in millimetres a) Section of headform in longitudinal vertical plane b) Section of headform in reference plane Key 1 reference plane 2 basic plane 3 front 4 back 5 longitudinal vertical median pl
47、ane 6 central transverse vertical plane NOTE 1 Longitudinal vertical median plane equivalent to EN 960:2006, 2.8 “vertical longitudinal plane”. NOTE 2 Central transverse vertical plane equivalent to EN 960:2006, 2.9 “vertical transverse plane”. Figure 1 Field of vision DIN EN 1078:2014-04 EN 1078:20
48、12+A1:2012 (E) 9 4.4 Shock absorbing capacity The helmet shall give protection to the forehead, rear, sides, temples and crown of the head. When tested in accordance with 5.3 and 5.4 the peak acceleration shall not, for each impact, exceed 250 g for the velocity of 5,42 010,+, m/s on the flat anvil, and 4,57010,+m/s on the kerbstone anvil. NOTE Th
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1