DIN EN 1096-2-2012 Glass in building - Coated glass - Part 2 Requirements and test methods for class A B and S coatings German version EN 1096-2 2012《建筑物玻璃 涂层玻璃 第2部分 A、B、S级涂层要求和试验方.pdf

1、April 2012 Translation by DIN-Sprachendienst.English price group 14No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、81.040.20!$9“1882290www.din.deDDIN EN 1096-2Glass in building Coated glass Part 2: Requirements and test methods for class A, B and S coatingsEnglish translation of DIN EN 1096-2:2012-04Glas im Bauwesen Beschichtetes Glas Teil 2: Anforderungen an und Prfverfahren fr Beschichtungen der Klassen A, B u

3、nd SEnglische bersetzung von DIN EN 1096-2:2012-04Verre dans la construction Verre couche Partie 2: Exigences et mthodes dessai pour les couches de classes A, B et STraduction anglaise de DIN EN 1096-2:2012-04SupersedesDIN EN 1096-2:2001-05www.beuth.deDocument comprises pagesIn case of doubt, the Ge

4、rman-language original shall be considered authoritative.3103.12 DIN EN 1096-2:2012-04 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 129 “Glass in building” (Secretariat: NBN, Belgium). The responsible German body involved in

5、 its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-09-91 AA Prfung von Beschichtungen auf Glas. Amendments This standard differs from DIN EN 1096-2:2001-05 as follows: a) a reference to the future EN 1096-5, Test method an

6、d classification for the self-cleaning performances of coated glass surfaces, has been included; b) a method to deal with toughenable/heat strengthenable and to be toughened/to be heat strengthened coated class has been added (see Annex A). Previous editions DIN EN 1096-2: 2001-05 EUROPEAN STANDARD

7、NORME EUROPENNE EUROPISCHE NORM EN 1096-2 January 2012 ICS 81.040.20 Supersedes EN 1096-2:2001English Version Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings Verre dans la construction - Verre couche - Partie 2: Exigences et mthodes dessai pour

8、les couches de classes A, B et S Glas im Bauwesen - Beschichtetes Glas - Teil 2: Anforderungen an und Prfverfahren fr Beschichtungen der Klassen A, B und S This European Standard was approved by CEN on 3 December 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which s

9、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europe

10、an Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are

11、the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,

12、 Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Memb

13、ers. Ref. No. EN 1096-2:2012: EEN 1096-2:2012 (E) 2 Contents Page Foreword 41 Scope 52 Normative references 53 Terms and definitions .54 Requirements .55 Samples and test pieces .75.1 Preparation .75.1.1 Coated annealed glass 75.1.2 Thermally treated coated glass 75.1.3 Coated toughened or heat stre

14、ngthened glass 85.2 Storage 85.3 Marking .86 Initial evaluation of test pieces .86.1 Preparation .86.2 Visual inspection .86.3 Spectrophotometric measurements 86.3.1 Coated annealed glass 86.3.2 Toughened or heat strengthened coated glass 97 Duration of the tests 98 Test methods 98.1 General 98.2 Po

15、sitioning of test pieces in the test cabinets 109 Final evaluation of test pieces . 119.1 General . 119.2 Cleaning . 119.3 Visual Inspection 129.4 Spectrophotometric measurements . 129.4.1 Coated annealed glass . 129.4.2 Thermally treated coated glass . 1210 Test report . 13Annex A (normative) Speci

16、al procedures for thermally treated coated glass . 15A.1 General . 15A.2 Samples and test pieces for chemical and abrasion tests 15A.3 Spectrophotometric measurements . 15A.3.1 Samples and test pieces for spectrophotometric measurements . 15A.3.2 Procedures 15Annex B (normative) Determination of the

17、 condensation resistance . 17B.1 General . 17B.2 Procedure 17B.3 Test cabinet . 17Annex C (normative) Determination of the resistance to acid 19C.1 General . 19C.2 Procedure 19C.3 Test cabinet . 19Annex D (normative) Determination of the resistance to neutral salt spray 21DIN EN 1096-2:2012-04 EN 10

18、96-2:2012 (E) 3 D.1 General . 21D.2 Apparatus . 21D.2.1 Spray cabinet . 21D.2.2 Heater and temperature control . 21D.2.3 Spraying device . 21Annex E (normative) Determination of resistance to abrasion . 22E.1 General . 22E.2 Apparatus . 22E.2.1 General . 22E.2.2 Metal finger 22E.2.3 Abrasive felt .

19、22E.3 Test piece . 23E.4 Test procedure . 23Annex F (normative) Criteria to demonstrate equivalence of coatings 25F.1 General . 25F.2 Composition of coatings 25F.3 Previous test reports . 25F.4 Evaluation. 25F.5 Examples 25Annex G (informative) Summary of test report 27Bibliography 29DIN EN 1096-2:2

20、012-04 EN 1096-2:2012 (E) 4 Foreword This document (EN 1096-2:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

21、 by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for id

22、entifying any or all such patent rights. This document supersedes EN 1096-2:2001. The main changes compared to the previous edition are: reference to the future EN 1096-5, Test method and classification for the Self-cleaning performances of coated glass surfaces; the introduction of a method to deal

23、 with toughenable / heat strengthenable and to be toughened / to be heat strengthened coated glass, see Annex A. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgari

24、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1096-2

25、:2012-04 EN 1096-2:2012 (E) 5 1 Scope This European Standard specifies requirements and test methods related to artificial weathering and abrasion of coatings on glass for use in buildings. These tests are aimed at evaluating the resistance of the coating to attack by simulated natural weathering co

26、nditions as well as to abrasion. This attack can be considered as representative of that which could be found on the external and/or internal face of the glazing. This European Standard applies to Class A, B and S coatings, as described in EN 1096-1. 2 Normative references The following referenced d

27、ocuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 410, Glass in Building Determination of luminous and solar characteristi

28、cs of glazing EN 1096-1:2012, Glass in building Coated glass Part 1: Definitions and classification. EN 12898, Glass in building Determination of emissivity 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1096-1 apply. 4 Requirements The coated glass

29、complying with this European Standard shall respect the requirements related to the different characteristics given in Table 1. DIN EN 1096-2:2012-04 EN 1096-2:2012 (E) 6 Table 1 Requirements Characteristics Test Method Requirements Visual Inspection Spectrophotometric measurements Condensation resi

30、stance Annex B - No defect, as defined in EN 1096-1, greater than 3 mm length - Maximum one defect between 2 mm and 3 mm length - Maximum five defects between 1 mm and 2 mm length In addition, no scratches, staining of the coating or clusters of pinholes greater than 1 mm shall be allowed (see EN 10

31、96-1). When compared with the reference test piece, in both reflection and transmission, there shall be no significant colour change. This observation shall be made within 20 sa. The transmittance measured at 550 nm and 900 nm shall differ by no more than 0,03 from the corresponding measured value o

32、n the reference test piece. For a glass claimed to have a low emissivity coating the reflectance at 8 m shall decrease by no more than 0,02. Acid resistance Annex C No requirements Neutral salt spray resistance Annex D - No defect, as defined in EN 1096-1, greater than 3 mm length - Maximum one defe

33、ct between 2 mm and 3 mm length - Maximum five defects between 1 mm and 2 mm length In addition, no scratches, staining of the coating or clusters of pinholes greater than 1 mm shall be allowed (see EN 1096-1). When compared with the reference test piece, in both reflection and transmission, there s

34、hall be no significant colour change. This observation shall be made within 20 sa. Abrasion resistance Annex E No requirement other than to ensure that the abraded area is uniform Total (diffuse plus direct) transmittance measured at 550 nm and 900 nm shall differ by no more than 0,05 from the corre

35、sponding value measured for the reference test piece. aThe time for observation is fixed to 20 s in order to have a reference period which can influence the visual inspection. DIN EN 1096-2:2012-04 EN 1096-2:2012 (E) 7 5 Samples and test pieces 5.1 Preparation 5.1.1 Coated annealed glass A sample of

36、 300 mm x 300 mm is needed for each test. For the three chemical durability tests, the test pieces are obtained by cutting the sample as shown in Figure 1. The abrasion test is undertaken on a 300 mm x 300 mm test piece. It is recommended that a spare sample be supplied in the event of one sample no

37、t being defect free. Key 1. test pieces 2. reference test piece for visual inspection 3. reference test piece for spectrophotometric measurement Figure 1 Plan for cutting a sample into test pieces 5.1.2 Thermally treated coated glass For the thermally treated coated glass, defined in EN 1096-1:2012,

38、 3.1.8 to 3.1.11, as the test pieces cannot be cut from test samples, a special procedure has to be employed to obtain the test pieces (see Annex A). DIN EN 1096-2:2012-04 EN 1096-2:2012 (E) 8 5.1.3 Coated toughened or heat strengthened glass Use coated annealed glass samples for testing this type o

39、f coated glass. 5.2 Storage The test pieces shall be stored inside a room at a temperature of (23 5) C with a relative humidity less than 80 %. Storage shall prevent dust, chemicals or condensation reacting with the test pieces. The test pieces shall not be stored for more than three months before p

40、erforming the test. 5.3 Marking The test pieces shall be marked on the uncoated glass surface. The following information shall be marked: manufacturers coating reference test pieces number 1 to 4 code for test Glasses with coating on both surfaces shall be marked without damaging the coating. The tw

41、o reference test pieces shall be marked as the test pieces plus “ref“. 6 Initial evaluation of test pieces 6.1 Preparation All test pieces shall be cleaned with demineralised water and with a soft tissue. Drying shall also be done with a soft tissue. If necessary this cleaning procedure can be repea

42、ted. 6.2 Visual inspection The test pieces shall be subjected to a visual inspection under an artificial sky in accordance with EN 1096-1. The inspection shall take place in both transmission and reflection. The test pieces shall be observed at a distance of 600 mm. All test pieces shall be defect f

43、ree. No scratches or pinholes shall be observed. If a test piece contains defects it shall be replaced. NOTE The replacement of test pieces is to avoid any misinterpretation of the testing results. 6.3 Spectrophotometric measurements 6.3.1 Coated annealed glass A measurement sample shall be cut from

44、 the centre of the reference test piece. The actual size shall be dependent on the type of equipment being used for the measurements. The transmittance of the measurement sample shall be measured with radiation of normal incidence at the following wavelengths: 550 nm (representative wavelength for l

45、ight and solar transmittance); 900 nm (representative wavelength for solar transmittance). For glass claiming to have a low emissivity coating a measurement of the reflectance shall be made at 8 m using radiation of nearly normal incidence. DIN EN 1096-2:2012-04 EN 1096-2:2012 (E) 9 6.3.2 Toughened

46、or heat strengthened coated glass As the measurement sample cannot be cut from the reference test piece, a special procedure has to be employed to make the measurement (see Annex A). 7 Duration of the tests The durations of the tests are set out in Table 2. Table 2 Duration of the tests Test Test du

47、ration for class A B S Condensation resistance Acid resistance Neutral salt spray Abrasion resistance 21 days 5 cycles 21 days 500 strokes 4 days 1 cycle 10 days 50 strokes 14 days 5 cycles a 500 strokes aThe neutral salt spray test is excluded for Class S coatings as they are subject to frequent cl

48、eaning in the applications for which theyare used in accordance with EN 1096-1. 8 Test methods 8.1 General The coated glass complying to this part of the European Standard shall pass the tests given in Annexes B, C, D and E which are designed to verify the chemical and mechanical characteristics of the coating. The tests are as follows: condensation resistance test (see