DIN EN 1112-2008 Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification English version of DIN EN 11.pdf

1、June 2008DEUTSCHE NORM English price group 12No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.70!$O%r“1440279www

2、.din.deDDIN EN 1112Sanitary tapware Shower outlets for sanitary tapware for water supply systems of type 1and type 2 General technical specificationEnglish version of DIN EN 1112:2008-06Sanitrarmaturen Brausen fr Sanitrarmaturen fr Wasserversorgungssysteme vom Typ 1 und Typ 2 Allgemeine technische S

3、pezifikationEnglische Fassung DIN EN 1112:2008-06SupersedesDIN EN 1112:1997-03 andDIN EN 13904:2003-12www.beuth.deDocument comprises 23 pagesDIN EN 1112:2008-06 2 National foreword This standard has been prepared by Technical Committee CEN/TC 164 “Water supply” (Secretariat: AFNOR, France). The resp

4、onsible German body involved in its preparation was the Normenausschuss Armaturen (Valves Standards Committee), Technical Committee NA 003-00-25 AA Sanitrarmaturen. Amendments This standard differs from DIN EN 1112:1997-03 and DIN EN 13904:2003-12 as follows: a) The standard has been editorially rev

5、ised. b) The field of application has been extended to include water supply systems of type 1 and type 2 as well as the associated requirements and tests. In particular, see new Tables 1, 3, 4, 5 and 7. Previous editions DIN EN 1112: 1997-03 DIN EN 13904: 2003-12 EUROPEAN STANDARD NORME EUROPENNE EU

6、ROPISCHE NORM EN 1112 February 2008 ICS 23.040.70 Supersedes EN 1112:1997, EN 13904:2003 English Version Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification Robinetterie sanitaire - Douches pour robinetterie sanitaire

7、 pour les systmes dalimentation en eau de types 1 et 2 - Spcifications techniques gnrales Sanitrarmaturen - Brausen fr Sanitrarmaturen fr Wasserversorgungssysteme vom Typ 1 und Typ 2 - Allgemeine technische Spezifikation This European Standard was approved by CEN on 12 January 2008. CEN members are

8、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th

9、e CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same

10、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom

11、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserv

12、ed worldwide for CEN national Members. Ref. No. EN 1112:2008: EEN 1112:2008 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 9 3 Terms and definitions .9 4 Classification9 5 Designation 10 6 Marking .10 7 Materials .10 7.1 Chemical and hygienic requirements10 7.2 Expose

13、d surface condition and quality of coating 10 8 Dimensional Characteristics 10 8.1 General10 8.2 Connecting Dimensions11 8.3 Special Cases.12 9 Leaktightness Characteristics13 9.1 General13 9.2 Test Method13 9.2.1 Principle13 9.2.2 Apparatus .13 9.2.3 Procedure .13 9.2.4 Requirements.13 10 Mechanica

14、l Characteristics 13 10.1 General13 10.2 Mechanical Strength14 10.2.1 Test Method14 10.2.2 Principle14 10.2.3 Apparatus .14 10.2.4 Procedure .14 10.2.5 Requirements.14 10.3 Thermal Shock Test.15 10.3.1 General15 10.3.2 Principle15 10.3.3 Apparatus .15 10.3.4 Procedure .16 10.3.5 Requirements.17 11 H

15、ydraulic Characteristics .17 11.1 General17 11.2 Flow rate .17 11.2.1 Test Method17 11.2.2 Principle17 11.2.3 Apparatus .17 11.2.4 Procedure .19 11.2.5 Requirement.19 12 Acoustic characteristics .20 DIN EN 1112:2008-06 EN 1112:2008 (E) 3 12.1 General .20 12.2 Procedure.20 12.3 Expression of results2

16、0 12.4 Determination of acoustic group .20 13 Maintenance.20 14 Rotary connection .20 14.1 General .20 14.2 Test method .21 14.2.1 Principle21 14.2.2 Apparatus.21 14.2.3 Procedure.21 14.2.4 Requirements.21 DIN EN 1112:2008-06 EN 1112:2008 (E) 4 Foreword This document (EN 1112:2008) has been prepared

17、 by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2008, and conflicting national standards shall

18、be withdrawn at the latest by August 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1112:1997 and E

19、N 13904:2003 The scope is enlarged to include requirements for shower outlets used with water supply systems of type 1 and type 2. See Tables 1, 3, 4, 5 and 7. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement th

20、is European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the

21、 United Kingdom. DIN EN 1112:2008-06 EN 1112:2008 (E) 5 Introduction In respect of potential adverse effects on the quality of water intended for human consumption, caused by the product covered by this standard: this standard provides no information as to whether the product may be used without res

22、triction in any of the Member States of the EU or EFTA; it should be noted that while awaiting the adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of these products remain in force. DIN EN 1112:2008-06 EN 1112:2008 (E) 6 1 Scope T

23、his European Standard specifies: the dimensional, leaktightness, mechanical, hydraulic and acoustic characteristics with which shower outlets shall comply; the procedures for testing these characteristics. This European Standard applies to shower heads and hand showers of any material used for ablut

24、ionary purposes and intended for equipping and supplementing sanitary tapware for baths and showers. This European Standard applies to shower heads and hand showers connected downstream of the obturator of the tapware. Integral and remote spray attachments incorporated in tapware (e.g. sink and wash

25、 basin mixing valves) are not covered by this standard. Details of pressures and temperatures are given in Table 1. Table 1 Conditions of use/Classifications Operating range of shower outlets Flow rate classes Acoustics Marking Water Supply system Limits Recommended See clause 12.0 See clause 6.0 ZZ

26、 (0,025 Q 30 13 Maintenance The spray plate for needle (normal) jets shall be removable by the use of simple tools, or by special tools supplied by the manufacturer for cleaning purposes. Shower outlets with an integrated cleaning device for the needle (normal) jets need not have this facility. 14 R

27、otary connection 14.1 General The test described is a type test (laboratory test) and not a quality control test carried out during manufacture. If a shower handset has a rotary connection permitting the handle to turn freely relative to the shower hose, this connection shall be capable of functioni

28、ng correctly and shall prevent twisting of the shower hose. DIN EN 1112:2008-06 EN 1112:2008 (E) 21 14.2 Test method 14.2.1 Principle The test is intended to check the function of any rotary connection. 14.2.2 Apparatus Key 1. water supply capable of supplying and maintaining the appropriate test pr

29、essure specified in Table 7; 2. rigid supply pipe for holding the shower handset at the connection thread so that the shower hangs down vertically; 3. device which engages with the shower handset in order to enable measurement of the initial torque necessary to rotate the shower handset relative to

30、the rotary connection. Figure 13 Rotary connection test apparatus 14.2.3 Procedure Seal the spray forming device so that it is watertight. Connect the rotary connection of the shower handset to the supply pipe. Apply cold water 30 C at the appropriate pressure specified in Table 7. Table 7 Pressure

31、conditions for rotary connection test Supply system Pressure Type 1 (0,3 0,02) MPa (3 0,2) bar Type 2 (0,1 0,01) MPa (1,0 0,1) bar Measure the torque necessary to initiate rotation of the shower handset relative to the rotary connection. 14.2.4 Requirements The initial torque shall not exceed 0,1 Nm. DIN EN 1112:2008-06