DIN EN 12007-3-2015 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3 Specific functional requirements for steel German version EN 1.pdf

1、July 2015 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2

2、3.040.10!%CwR“2328447www.din.deDDIN EN 12007-3Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar Part 3: Specific fun tional requirements for steel;English version EN 12007-3:2015,English translation of DIN EN 12007-3:2015-07Gasinfrastruktur Rohrleitungen mit eine

3、m maximal zulssigen Betriebsdruck bis einschlielich 16 bar Teil 3: Besondere funktionale Anforderungen fr Stahl;Englische Fassung EN 12007-3:2015,Englische bersetzung von DIN EN 12007-3:2015-07Infrastructures gazires Canalisations pour pression maximale de service infrieure ou gale 16 bar Partie 3:

4、Exigences fonctionelles spcifiques pour lacier;Version anglaise EN 12007-3:2015,Traduction anglaise de DIN EN 12007-3:2015-07SupersedesDIN EN 12007-3:2000-08www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 25 pages 06.15cDIN EN 12007-3:2

5、015-07 2 A comma is used as the decimal marker. National foreword This document (EN 12007-3:2015) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the DIN-Normenausschuss Gastechnik (DIN

6、Standards Committee Gas Technology), Working Committee NA 032-02-02 AA Gasverteilung. This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum operating pressures up to and including 16 bar.

7、 This European Standard should be applied in association with national standards and/or technical rules setting out the above-mentioned common basic principles. In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standa

8、rd, national legislation/regulation shall take precedence as illustrated in CEN/TR 13737 (all parts). CEN/TR 13737 (all parts) gives: clarification of all legislation/regulations applicable in a member state; if appropriate, more restrictive national requirements; a national contact point for the la

9、test information. It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). Amendments This standard differs from DIN EN 12007-3:2000

10、-08 as follows: a) in the scope, recommendations have been transferred into requirements; b) EN 10208-1 has been replaced by ISO 3183; c) in Tables 1 and 2, nominal diameters DN 10 up to DN 20 have been added; d) in Subclause 4.4, reference to EN 13774 for metallic valves has been added; e) in Subcl

11、ause 4.5.2, reference to EN 12068 for organic coatings in the form of tapes and shrinkable materials has been added; f) in Subclause 4.5.3, reference to EN 12954 for cathodic protection has been added; g) in Subclause 4.6.3, the information has been added that threaded tubes shall conform to EN 1025

12、5; h) in Subclause 4.6.1, the information has been added that welding and non-destructive testing shall be carried out in accordance with EN 12732. Previous editions DIN EN 12007-3: 2000-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12007-3 May 2015 ICS 23.040.10 Supersedes EN 12007-3:2000

13、English Version Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel Infrastructures gazires - Canalisations pour pression maximale de service infrieure ou gale 16 bar - Partie 3: Exigences fonctionnelles spcifi

14、ques pour lacier Gasinfrastruktur - Rohrleitungen mit einem maximal zulssigen Betriebsdruck bis einschlielich 16 bar - Teil 3: Besondere funktionale Anforderungen fr Stahl This European Standard was approved by CEN on 12 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regul

15、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN membe

16、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CE

17、N members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

18、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in a

19、ny form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12007-3:2015 EEN 12007-3:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms and definitions .7 4 Design .7 4.1 General requirements for selection of steel materials.7 4.1.1 General 7 4.1.2 Q

20、uality level 8 4.1.3 Weldability 8 4.1.4 Impact energy .9 4.1.5 Inspection documents for components 9 4.2 Pipes and fittings .9 4.2.1 Steel pipes 9 4.2.2 Fittings . 10 4.3 Insulating joints 10 4.3.1 Type test 10 4.3.2 Strength test 10 4.3.3 Tightness test 11 4.3.4 Electrical test . 11 4.3.5 Inspecti

21、on documents 11 4.4 Valves . 11 4.5 Corrosion protection 11 4.5.1 General . 11 4.5.2 Passive corrosion protection 11 4.5.3 Active corrosion protection . 12 4.6 Jointing methods 12 4.6.1 Welding joints . 12 4.6.2 Flanged joints 12 4.6.3 Threaded joints . 12 4.6.4 Compression joints 12 5 Construction

22、13 5.1 Handling, transportation and storage. 13 5.2 Laying 13 5.2.1 General . 13 5.2.2 Pipe stringing 13 5.2.3 Deflection . 13 5.2.4 Connections to other plant 14 5.2.5 Valves . 14 5.2.6 Boring, jacking and impact moling . 14 5.3 Construction records . 14 6 Coating inspection 15 7 Pressure testing 1

23、5 Annex A (informative) Handling, transportation and storage 16 A.1 Safety . 16 A.2 Handling . 16 DINEN 12007-3:2015-07EN 12007-3:2015 (E) 3 A.3 Transportation . 17 A.4 Storage . 17 Annex B (informative) Deflection of pipes 19 Annex C (informative) Calculation of wall thickness 20 Annex D (informati

24、ve) Significant technical changes between this European Standard and the previous edition . 21 Bibliography 23 DIN EN 12007-3:2015-07 EN 12007-3:2015 (E) 4 Foreword This document (EN 12007-3:2015) has been prepared by Technical Committee CEN/TC 234 “Gas infrastructure”, the secretariat of which is h

25、eld by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibili

26、ty that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12007-3:2000. Annex D provides details of significant technical changes between this European

27、 Standard and the previous edition. There is a complete suite of functional standards prepared by CEN/TC 234 “Gas infrastructure“ to cover all parts from the input of gas to the transmission system up to the inlet connection of the gas appliances, whether for domestic, commercial or industrial purpo

28、ses. In preparing this standard, a basic understanding of gas infrastructure by the user has been assumed. Gas infrastructure is complex and the importance on safety of its construction and use has led to the development of very detailed codes of practice and operating manuals in the member countrie

29、s. These detailed statements embrace recognized standards of gas engineering and the specific requirements imposed by the legal structures of the member countries. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implemen

30、t this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Sl

31、ovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12007-3:2015-07 EN 12007-3:2015(E)5 1 Scope This European Standard describes the specific functional requirements for steel pipelines in addition to the general functional requirements of EN 12007-1 for maximum opera

32、ting pressures up to and including 16 bar. This European Standard specifies common basic principles for gas infrastructure. Users of this European Standard should be aware that more detailed national standards and/or codes of practice may exist in the CEN member countries. This European Standard is

33、intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles. In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this standard, national legis

34、lation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts). CEN/TR 13737 (all parts) gives: clarification of all legislation/regulations applicable in a member state; if appropriate, more restrictive national requirements; a national contact point for the latest information. 2 Nor

35、mative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments

36、) applies. EN 1092-1, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 1: Steel flanges EN 1514-1, Flanges and their joints Dimensions of gaskets for PN-designated flanges Part 1: Non-metallic flat gaskets with or without inserts EN 1514-2, Fl

37、anges and their joints Gaskets for PN-designated flanges Part 2: Spiral wound gaskets for use with steel flanges EN 1514-3, Flanges and their joints Dimensions of gaskets for PN-designated flanges Part 3: Non-metallic PTFE envelope gaskets EN 1514-4, Flanges and their joints Dimensions of gaskets fo

38、r PN-designated flanges Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges EN 1515-1, Flanges and their joints Bolting Part 1: Selection of bolting EN 1515-2, Flanges and their joints Bolting Part 2: Classification of bolt materials for steel flanges,

39、 PN designated EN 1591-1, Flanges and their joints Design rules for gasketed circular flange connections Part 1: Calculation EN 1591-2, Flanges and their joints Design rules for gasketed circular flange connections Part 2: Gasket parameters DINEN 12007-3:2015-07EN 12007-3:2015 (E) 6 EN 1594, Gas inf

40、rastructure Pipelines for maximum operating pressure over 16 bar Functional requirements EN 1759-1, Flanges and their joint Circular flanges for pipes, valves, fittings and accessories, Class designated Part 1: Steel flanges, NPS 1/2 to 24 EN 10204, Metallic products Types of inspection documents EN

41、 10226-1, Pipe threads where pressure tight joints are made on the threads Part 1: Taper external threads and parallel internal threads Dimensions, tolerances and designation EN 10255, Non-Alloy steel tubes suitable for welding and threading Technical delivery conditions EN 12007-1, Gas infrastructu

42、re Pipelines for maximum operating pressure up to and including 16 bar Part 1: General functional requirements EN 12327, Gas infrastructure Pressure testing, commissioning and decommissioning procedures Functional requirements EN 12560-1, Flanges and their joints Gaskets for Class-designated flanges

43、 Part 1: Non-metallic flat gaskets with or without inserts EN 12560-2, Flanges and their joints Dimensions of gaskets for Class-designated flanges Part 2: Spiral wound gaskets for use with steel flanges EN 12560-3, Flanges and their joints Gaskets for Class-designated flanges Part 3: Non-metallic PT

44、FE envelope gaskets EN 12560-4, Flanges and their joints Gaskets for Class-designated flantes Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges EN 12560-5, Flanges and their joints Gaskets for Class-designated flanes Part 5: Metallic ring joint gaske

45、ts for use with steel flanges EN 12732, Gas infrastructure Welding steel pipework Functional requirements EN 12954, Cathodic protection of buried or immersed metallic structures General principles and application for pipelines EN 13509, Cathodic protection measurement techniques EN 13774, Valves for

46、 gas distribution systems with maximum operating pressure less than or equal to 16 bar Performance requirements EN 15257, Cathodic protection Competence levels and certification of cathodic protection personnel EN 50162, Protection against corrosion by stray current from direct current systems EN 15

47、280, Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines EN ISO 3183, Petroleum and natural gas industries Steel pipe for pipeline transportation systems (ISO 3183) DIN EN 12007-3:2015-07 EN 12007-3:2015(E)7 3 Terms and definitions For the purpo

48、ses of this document, the terms and definitions given in EN 12007-1 and the following apply. 3.1 compressor joint type of joint in which gas tightness is achieved by compression within a socket with or without a seal 3.2 threaded joint type of joint in which gas tightness is achieved by metal to met

49、al contact within threads with the assistance of a sealant 3.3 flanged joint type of joint in which gas tightness is achieved by compression of a gasket between the faces of two flanges 3.4 insulating joint fitting installed to insulate electrically one section of pipeline from another 4 Design 4.1 General requirements for selection of steel materials 4.1.1 General Steel pipes and other pipeline components shall conform to the relevant European or Inte