DIN EN 12007-5-2014 Gas infrastructure - Pipelines for maximium operating pressure up to and including 16 bar - Part 5 Service lines - Specific functional requirements German versi.pdf

1、July 2014Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23

2、.040.01!%22“2159315www.din.deDDIN EN 12007-5Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar Part 5: Service lines Specific functional requirements;English version EN 12007-5:2014,English translation of DIN EN 12007-5:2014-07Gasinfrastruktur Rohrleitungen mit ei

3、nem maximal zulssigen Betriebsdruck bis einschlielich 16 bar Teil 5: Hausanschlussleitungen Spezifische funktionale Anforderungen;Englische Fassung EN 12007-5:2014,Englische bersetzung von DIN EN 12007-5:2014-07Infrastructures gazires Canalisations pour pression maximale de service infrieure ou gale

4、 16 bar Partie 5: Branchements Recommandations fonctionnelles spcifiques;Version anglaise EN 12007-5:2014,Traduction anglaise de DIN EN 12007-5:2014-07www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 27 pages06.14 DIN EN 12007-5:2014-072

5、 A comma is used as the decimal marker. National foreword This document (EN 12007-5:2014) has been prepared by Technical Committee CEN/TC 234 “Gas infra-structure” (Secretariat: DIN, Germany), The responsible German body involved in its preparation was the Normenausschuss Gastechnik (Gas Technology

6、Standards Committee), Working Committee NA 032-02-02 AA Gasverteilung. This European Standard supplements the general functional requirements of EN 12007-1 by describing specific functional requirements for the design and construction of service lines for a maximum operating pressure (MOP) up to and

7、 including 16 bar. Pressure testing and commissioning and decommissioning procedures are dealt with in DIN EN 12327. Technical Rules within the meaning of this standard are the following DVGW-Arbeitsbltter (DVGW Technical Rules): G 459-1, G 462, G 472 and G 469. The above technical rules give more d

8、etailed information supplementing the requirements of DIN EN 12007-5. In Germany, the main line ends at the main shut-off device, which is also the point at which ownership is transferred from the public grid operator to the customer. It is intended to include this standard in the body of technical

9、rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). EN 12007-5 April 2014 ICS 23.040.01 English Version Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar

10、 - Part 5: Service lines - Specific functional requirements Infrastructures gazires - Canalisations pour pression maximale de service infrieure ou gale 16 bar - Partie 5: Branchements - Recommandations fonctionnelles spcifiques Gasinfrastruktur - Rohrleitungen mit einem maximal zulssigen Betriebsdru

11、ck bis einschlielich 16 bar - Teil 5: Hausanschlussleitungen - Spezifische funktionale Anforderungen This European Standard was approved by CEN on 8 February 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standa

12、rd the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,

13、 French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulg

14、aria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tu

15、rkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12007-5:2014 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPI

16、SCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 12007-5:2014 (E) Contents PageIntroduction .5 1 Scope 6 2 Normative references 7 3 Terms and definitions .8 3.1 General terminology 8 3.2 Pressure related terminology 10 4 Design 10 4.1 General . 10 4.2 Protection 11 4.3 Mater

17、ials and components 12 4.3.1 General . 12 4.3.2 Isolation valve . 12 4.3.3 Flow limiting device 13 4.3.4 Venting devices. 13 4.3.5 Regulators and meters . 13 4.4 Service line routing. 13 4.4.1 External routing 13 4.4.2 Wall and floor transition . 13 4.4.3 Internal routing 14 4.5 Pipe sizing . 15 4.6

18、 Identification 15 5 Construction 15 5.1 General . 15 5.2 Storage, handling and transportation. 16 5.3 Service line installation 16 5.4 Connections to existing gas infrastructure . 17 6 Quality control . 17 6.1 Quality management system . 17 6.2 Inspection prior to installation 17 6.3 Inspection dur

19、ing installation 17 6.3.1 Ground conditions 17 6.3.2 Joint integrity 18 6.4 Competence 18 7 Pressure testing 18 7.1 General . 18 7.2 Safety during pressure testing 19 7.3 Prior to testing 19 7.4 Test mediums 19 7.5 Measurement equipment . 19 7.6 Strength test 19 7.7 Tightness test 20 7.8 Failed pres

20、sure test 20 8 Commissioning and decommissioning 21 8.1 General . 21 8.2 Purging 21 DIN EN 12007-5:2014-07Foreword .42 EN 12007-5:2014 (E) 3 9.2 Record system and traceability . 22 Annex A (normative) Jointing methods . 23 A.1 General . 23 A.2 Threaded joints 23 A.3 Fusion, welded, brazed and solder

21、ed joints . 23 A.4 Mechanical joints . 23 A.5 Pressed joints 23 A.5.1 General . 23 A.5.2 Pressed joints for copper pipe . 24 Bibliography 25 DIN EN 12007-5:2014-079 Operation and maintenance 21 9.1 General . 21 EN 12007-5:2014 (E) 4 Foreword This document (EN 12007-5:2014) has been prepared by Techn

22、ical Committee CEN/TC 234 “Gas infrastructure”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014 and conflicting national standards shall be wi

23、thdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate

24、 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard is part of the series EN 12007 “Gas infrastructure Pipelines for maximum operating pressure up to and including 16 bar“ which comprises the

25、 following parts: Part 1 General functional requirements; Part 2 Specific functional requirements for polyethylene (MOP up to and including 10 bar); Part 3 Specific functional requirements for steel; Part 4 Specific functional requirements for renovation; Part 5 Specific functional recommendations o

26、f new service lines. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M

27、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12007-5:2014-07EN 12007-5:2014 (E) 5 Introduction This Euro

28、pean Standard describes the general functional requirements for gas supply through service line pipe systems and covers the pressure range up to and including 16 bar maximum operating pressure (MOP). It gives normative and informative references for safe and secure gas infrastructures. It applies to

29、 their design, construction, operation and the related aspects of safety, environment and public health, all in order to provide a safe and secure supply of gas. This European Standard is intended to be used in addition to the EN 12007 series of European Standards. The requirements of this European

30、Standard are based on safe gas engineering practice under conditions normally encountered in the gas industry. Requirements for all unusual conditions cannot be specifically provided for, nor are all engineering and construction details prescribed. Existing industrial safety regulations applying to

31、work areas, safety devices and safe work practices are not intended to be supplanted by this European Standard. Persons responsible for the design, construction and operation of gas infrastructures should have regard to the guidance given in this European Standard, the EN 12007 series of European St

32、andards and to other relevant standards. It is the responsibility of these persons to apply these functional requirements, supplemented with other proven good practice to the particular circumstances of each gas infrastructure. The recommendations in this European Standard are intended to be applied

33、 by competent persons who have suitable knowledge and experience. Notes in the text are informative. The designer, constructor or operator of service line and pipeline systems is cautioned that this European Standard is not a design handbook or code of practice. Additional national or company standa

34、rds describing the details are needed. These detailed standards should be in line with the basic principles of this European Standard. All pressures are gauge pressure unless stated otherwise. In preparing this European Standard it was recognised that the suite of relevant European Standards is inco

35、mplete. Reference may be made where appropriate to international, national or other standards until relevant European Standards are available. DIN EN 12007-5:2014-07EN 12007-5:2014 (E) 6 1 Scope This European Standard describes the specific functional requirements for service lines in addition to th

36、e general functional requirements of EN 12007-1 for: a) a maximum operating pressure (MOP) up to and including 16 bar; b) an operating temperature between -20 C and +40 C. It applies to their design, construction, commissioning, decommissioning, operation, maintenance, extension and other associated

37、 works. The service line is the physical asset comprising of pipework from the gas main branch saddle or top tee to the outlet of the distribution system operators nominated point(s) of delivery (for example: isolation valve, regulator, meter connection or combination of regulator and isolation valv

38、e). The ownership and operation responsibility can vary between member states. The extent of the service line can differ in each member state. To illustrate this, the various points of deliveries are indicated in Figure 1. Consult Figure 1 (A/B/C/D/E) and member state regulations and standards. NOTE

39、 The valve at point A is not necessarily utilised by each member state. National preference for points of deliveries should be stated in the national foreword. Key P gas main Distribution system operator nominated Point(s) of Delivery: T Top Tee / Branch Saddle A outlet of below ground service line

40、valve outside the building M/R Meter and/or Regulator B outlet of above ground service line valve outside the building C outlet of meter/regulator outside the building D outlet of above ground service line valve inside the building E outlet of meter/regulator inside the building Figure 1 Distributio

41、n system operator nominated point of delivery Specific functional requirements for: polyethylene pipelines are given in EN 12007-2. steel pipelines are given in EN 12007-3. pipework for buildings are given in EN 1775. DIN EN 12007-5:2014-07EN 12007-5:2014 (E) 7 pressure regulating installations are

42、given in EN 12279 or EN 12186. pressure testing, commissioning and decommissioning are given in EN 12327. This European Standard represents the recommendations at the time of its preparation. It does not apply retrospectively to installations before the publication date unless specifically stated. T

43、his European Standard specifies common basic principles for gas infrastructure. Users of this European Standard should be aware that more detailed national standards and/or code of practice may exist in the CEN member countries. This European Standard is intended to be applied in association with th

44、ese national standards and/or codes of practice setting out the above-mentioned basic principles. In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes preceden

45、ce as illustrated in CEN/TR 13737 (all parts). CEN/TR 13737 (all parts) gives: clarification of all legislations/regulations applicable in a member state; if appropriate, more restrictive national requirements; a national contact point for the latest information. 2 Normative references The following

46、 documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 751-1, Sealing ma

47、terials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds EN 751-2, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds EN 7

48、51-3, Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes. EN 1057, Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications EN 1254 (all parts), Copper and co

49、pper alloys Plumbing fittings EN 1775:2007, Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations EN 1776, Gas supply systems - Natural gas measuring stations - Functional requirements EN 10226-1, Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation EN 10