1、November 2016 English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 77.150.30!%q.“2587811www.din.de
2、DIN EN 12165Copper and copper alloys Wrought and unwrought forging stock;English version EN 12165:2016,English translation of DIN EN 12165:2016-11Kupfer und Kupferlegierungen Vormaterial fr Schmiedestcke;Englische Fassung EN 12165:2016,Englische bersetzung von DIN EN 12165:2016-11Cuivre et alliages
3、de cuivre Barres corroyes et brutes pour matriage;Version anglaise EN 12165:2016,Traduction anglaise de DIN EN 12165:2016-11SupersedesDIN EN 12165:201108www.beuth.deDocument comprises 32 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered author
4、itative.11.16 DIN EN 12165:2016-11 2 A comma is used as the decimal marker. National foreword This document (EN 12165:2016) has been prepared by Technical Committee CEN/TC 133 “Copper and copper alloys” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Norm
5、enausschuss Nichteisenmetalle (DIN Standards Committee Nonferrous Metals), Working Committee NA 066-02-04 AA Strangpress- und Zieherzeugnisse. Amendments This standard differs from DIN EN 12165:2011-08 as follows: a) due to the market requirements for the restriction of lead content and modification
6、 of the chemical composition of alloy CuZn39Pb1 (CW611N), three new materials have been added: CuZn35Pb1,5AlAs (CW625N), CuZn33Pb1,5AlAs (CW626N) and CuZn33Pb1AlSiAs (CW725R); b) an optional procedure has been included for referring to restrictions to the chemical composition imposed by the 4 MS Com
7、mon Composition List for materials used for products accepted for contact with drinking water; c) the requirements and test methods for the resistance to dezincification have been modified; d) specifications for surface quality have been added; e) the mechanical properties for alloy CuZn21Si3P (CW72
8、4R) have been amended. Previous editions DIN 1773: 1927-07 DIN 1776: 1929-12, 1936-01, 1939-01, 1941-07 DIN 1782: 1929-12, 1935-01, 1963-07, 1969-07 DIN 1714: 1936x-02 DIN 17672: 1957-04 DIN 17672-1: 1961-08, 1969-02, 1974-06, 1983-2 DIN 17672-2: 1961-08, 1969-06, 1974-06 DIN EN 12165: 1998-04, 2011
9、-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12165 July 2016 ICS 77.150.30 Supersedes EN 12165:2011English Version Copper and copper alloys - Wrought and unwrought forging stock Cuivre et alliages de cuivre - Barres corroyes et brutes pour matriage Kupfer und Kupferlegierungen - Vormater
10、ial fr Schmiedestcke This European Standard was approved by CEN on 9 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and b
11、ibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res
12、ponsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R
13、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NO
14、RMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12165:2016 E2 Contents Page European foreword . 4 Introduction 6 1 Sco
15、pe 7 2 Normative references 7 3 Terms and definitions . 7 4 Designations 8 4.1 Material . 8 4.1.1 General 8 4.1.2 Symbol . 8 4.1.3 Number . 8 4.2 Material condition 8 4.3 Product 8 5 Ordering information . 10 6 Requirements 12 6.1 Composition . 12 6.2 Mechanical properties 12 6.3 Resistance to dezin
16、cification . 12 6.4 Dimensions and tolerances 13 6.4.1 Diameter 13 6.4.2 Deviation from circular form . 13 6.4.3 Length . 13 6.4.4 Straightness 13 6.5 Surface quality. 13 7 Sampling 13 7.1 General . 13 7.2 Analysis 13 7.3 Hardness and dezincification resistance tests 14 8 Test methods . 14 8.1 Analy
17、sis 14 8.2 Hardness test . 14 8.2.1 General . 14 8.2.2 Preparation of samples 14 8.2.3 Procedure for testing 14 8.3 Dezincification resistance test 14 8.4 Retests for analysis, hardness and dezincification resistance 14 8.5 Rounding of results . 15 9 Declaration of conformity and inspection document
18、ation . 15 9.1 Declaration of conformity . 15 9.2 Inspection documentation 15 10 Marking, packaging, labelling 15 Bibliography . 30 EN 12165:2016 (E) DIN EN 12165:2016-11 3 Tables Table 1 Composition of copper . 16 Table 2 Composition of low alloyed copper alloys 17 Table 3 Composition of copper-alu
19、minium alloys . 18 Table 4 Composition of copper-nickel alloys 19 Table 5 Composition of copper-nickel-zinc alloys . 19 Table 6 Composition of copper-zinc alloys. 20 Table 7 Composition of copper-zinc-lead alloys 21 Table 8 Composition of complex copper-zinc alloys . 23 Table 9 Mechanical properties
20、 of round forging stock of copper 25 Table 10 Mechanical properties of round forging stock of low alloyed copper alloys . 25 Table 11 Mechanical properties of round forging stock of copper-aluminium alloys . 26 Table 12 Mechanical properties of round forging stock of copper-nickel alloys . 26 Table
21、13 Mechanical properties of round forging stock of copper-nickel-zinc alloys . 26 Table 14 Mechanical properties of round forging stock of copper-zinc alloys . 27 Table 15 Mechanical properties of round forging stock of copper-zinc-lead alloys . 27 Table 16 Mechanical properties of round forging sto
22、ck of complex copper-zinc alloys . 28 Table 17 Tolerances on diameter of round forging stock . 29 Table 18 Tolerances on straightness of round forging stock 29 Table 19 Sampling rate 29 EN 12165:2016 (E) DIN EN 12165:2016-11 4 European foreword This document (EN 12165:2016) has been prepared by Tech
23、nical Committee CEN/TC 133 “Copper and copper alloys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2017, and conflicting national standards sha
24、ll be withdrawn at the latest by January 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12165:2011.
25、 Within its programme of work, Technical Committee CEN/TC 133 requested CEN/TC 133/WG 4 “Extruded and drawn products, forgings and scrap” to revise the following standard: EN 12165:2011, Copper and copper alloys Wrought and unwrought forging stock. This document is one of a series of European Standa
26、rds for the copper and copper alloy products rod, wire, profile and forgings. Other products are specified as follows: EN 12163, Copper and copper alloys Rod for general purposes; EN 12164, Copper and copper alloys Rod for free machining purposes; EN 12166, Copper and copper alloys Wire for general
27、purposes; EN 12167, Copper and copper alloys Profiles and bars for general purposes; EN 12168, Copper and copper alloys Hollow rod for free machining purposes; EN 12420, Copper and copper alloys Forgings; EN 13601, Copper and copper alloys Copper rod, bar and wire for general electrical purposes; EN
28、 13602, Copper and copper alloys Drawn round copper wire for the manufacture of electrical conductors; EN 13605, Copper and copper alloys Copper profiles and profiled wires for electrical purposes. In comparison with EN 12165:2011, the following significant technical changes were made: a) addition o
29、f three new materials: CuZn35Pb1,5AlAs (CW625N), CuZn33Pb1,5AlAs (CW626N) and CuZn33Pb1AlSiAs (CW725R) due to the market requirements on restriction of lead and modification of the chemical composition for CuZn39Pb1 (CW611N); b) introduction of an optional procedure how to refer to restrictions to t
30、he chemical composition imposed by the 4 MS Common Composition List for materials used for products accepted for contact with drinking water; c) requirements and test methods for resistance of dezincification modified; EN 12165:2016 (E) DIN EN 12165:2016-11 5 d) provisions for surface quality added;
31、 e) mechanical properties for CuZn21Si3P (CW724R) modified. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
32、 Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 12165:2016 (E) DIN EN 12
33、165:2016-11 6 Introduction The European Committee for Standardization (CEN) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the alloy CuZn21Si3P (CW724R) and CuZn33Pb1AlSiAs (CW725R) given in 6.1. CEN takes no position conc
34、erning the evidence, validity and scope of this patent right. The holder of this patent right has ensured the CEN that he is willing to negotiate licenses either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the
35、statement of the holder of this patent right is registered with CEN. For CuZn21Si3P (CW724R) information may be obtained from: Wieland-Werke AG Graf Arco Strae 36 D-89079 Ulm GERMANY For CuZn33Pb1AlSiAs (CW725R) information may be obtained from: Diehl Metall Messing Heinrich-Diehl-Strae 9 D-90552 Rt
36、henbach/Pegnitz GERMANY Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. CEN shall not be held responsible for identifying any or all such patent rights. CEN and CENELEC maintain online lists of pa
37、tents relevant to their standards. Users are encouraged to consult the lists for the most up to date information concerning patents (ftp:/ftp.cencenelec.eu/EN/IPR/Patents/IPRdeclaration.pdf). Due to developing legislation, the composition of a material may be restricted to the composition specified
38、in this European Standard with respect to individual uses (e.g. for the use in contact with drinking water in some Member States of the European Union). These individual restrictions are not part of this European Standard. Nevertheless, for materials for which traditional and major uses are affected
39、, these restrictions are indicated. The absence of an indication, however, does not imply that the material can be used in any application without any legal restriction. EN 12165:2016 (E) DIN EN 12165:2016-11 7 1 Scope This European Standard specifies the composition, property requirements and dimen
40、sional tolerances for forging stock of copper and copper alloys. The sampling procedures and the methods of test for verification of conformity to the requirements of this European Standard are also specified. 2 Normative references The following documents, in whole or in part, are normatively refer
41、enced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1173, Copper and copper alloys - Material condition designation EN 1412
42、, Copper and copper alloys - European numbering system EN 1655, Copper and copper alloys - Declarations of conformity EN 1976, Copper and copper alloys - Cast unwrought copper products EN 10204, Metallic products - Types of inspection documents EN ISO 6506-1, Metallic materials - Brinell hardness te
43、st - Part 1: Test method (ISO 6506-1) EN ISO 6509-1, Corrosion of metals and alloys Determination of dezincification resistance of brass (ISO 6509-1) ISO 1190-1, Copper and copper alloys Code of designation Part 1: Designation of materials 3 Terms and definitions For the purposes of this document, t
44、he following terms and definitions apply. 3.1 forging three-dimensional shaped product produced by a plastic forming process such as hammering or pressing between open or closed dies, including hammering between flat surfaces, normally when hot Note 1 to entry Forging processes include, drop forging
45、, hot stamping and hot pressing. 3.2 forging stock extruded, rolled or drawn product such as rod, hollow rod, bar or profile or cast product, intended for the production of forgings 3.3 deviation from circular form difference between the maximum and the minimum diameters measured at any one cross-se
46、ction of a round product SOURCE: EN 12163:2016, 3.2 EN 12165:2016 (E) DIN EN 12165:2016-11 8 4 Designations 4.1 Material 4.1.1 General The material is designated either by symbol or by number (see Tables 1 to 8). 4.1.2 Symbol The material symbol designation is based on the designation system given i
47、n ISO 1190-1. NOTE Although material symbol designations used in this standard might be the same as those in other standards using the designation system given in ISO 1190-1, the detailed composition requirements are not necessarily the same. 4.1.3 Number The material number designation is in accord
48、ance with the system given in EN 1412. 4.2 Material condition For the purposes of this standard, the following designations, which are in accordance with the system given in EN 1173, apply for the material condition: M material condition for the product as manufactured without specified mechanical p
49、roperties; H. material condition designated by the minimum value of hardness requirement for the product with mandatory hardness requirements. Material condition is designated by only one of the above designations. 4.3 Product The product designation provides a standardized pattern of designation from which a rapid and unequivocal description of a product can be conveyed in communication. It provi
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1