DIN EN 12309-5-2015 Gas-fired sorption appliances for heating and or cooling with a net heat input not exceeding 70 kW - Part 5 Requirements German version EN 12309-5 2014《净热输入不超过7.pdf

1、March 2015 Translation by DIN-Sprachendienst.English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.140.30; 27.080This standard has been included in the body of DVGW Technical Rules.!%A3%“2301602www.din.deDDIN EN 12309-5Gas-fired sorption appliances for heating and/or cooling with a net heatinput not exceeding 70 kW Part 5: Requirements;English version EN 12309-5:2014,English translation of DIN

3、 EN 12309-5:2015-03Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einerNennwrmebelastung nicht ber 70 kW Teil 5: Anforderungen;Englische Fassung EN 12309-5:2014,Englische bersetzung von DIN EN 12309-5:2015-03Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidisseme

4、nt dedbit calorifique sur PCI infrieur ou gal 70 kW Partie 5: Exigences;Version anglaise EN 12309-3:2014,Traduction anglaise de DIN EN 12309-5:2015-03Together with DIN EN 12309-1:2015-03, DIN EN 12309-3:2015-03, DIN EN 12309-4:2015-03,DIN EN 12309-6:2015-03 and DIN EN 12309-7:2015-03 supersedes DIN

5、EN 12309-2:2000-06See start of applicationSupersedes: see belowwww.beuth.deDocument comprises 15 pagesIn case of doubt, the German-language original shall be considered authoritative.02.15 DIN EN 12309-5:2015-03 2 A comma is used as the decimal marker. Start of application The start of application o

6、f this standard is 2015-03-01. DIN EN 12309-2:2000-06 may be used in parallel until 2015-06-30. National foreword This standard includes safety requirements. This document (EN 12309-5:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption ap

7、pliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 A

8、A Husliche, gewerbliche und industrielle Gasanwendung. This standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water) and has been included in the body of technical rules and standards fo

9、r gas issued by the DVGW. Amendments This standard differs from DIN EN 12309-2:2000-06 as follows: a) the EN 12309 standards series has been restructured and supplemented: EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, and EN 12309-1 and EN 12309 Parts 3 to 7 supersede EN 12309-2:2000; b) EN 1

10、2309-5:2014 deals particularly with the requirements relating to the energy efficiency performance of gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. Previous editions DIN 33830-2: 1988-06 DIN EN 12309-2: 2000-06 EUROPEAN STANDARD NORME EUROPENNE E

11、UROPISCHE NORM EN 12309-5 December 2014 ICS 27.080; 91.140.30 Supersedes EN 12309-2:2000English Version Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 5: Requirements Appareils sorption fonctionnant au gaz pour le chauffage et/ou le refroidi

12、ssement de dbit calorifique sur PCI infrieurou gal 70 kW - Partie 5: Exigences Gasbefeuerte Sorptions-Gerte fr Heizung und/oder Khlung mit einer Nennwrmebelastung nicht ber 70 kW -Teil 5: Anforderungen This European Standard was approved by CEN on 18 October 2014. CEN members are bound to comply wit

13、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manag

14、ement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same sta

15、tus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt

16、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN

17、 All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12309-5:2014 EEN 12309-5:2014 (E) 2 Contents Page Foreword 3 1 Scope 5 1.1 Scope of EN 12309 .5 1.2 Scope of this Part 5 of EN 12309 5 2 Normative references 5 3 Terms and definitions .6

18、 4 Requirements .6 4.1 Cooling capacity rating and energy performance 6 4.1.1 Primary functions 6 4.1.2 Secondary functions .6 4.1.3 Efficiency requirements 7 4.2 Heating capacity rating and energy performance 7 4.2.1 Primary functions 7 4.2.2 Secondary functions .7 4.2.3 Efficiency requirements 7 5

19、 Marking and instructions 8 5.1 Data plate 8 5.2 Technical instructions for installation and adjustment .8 5.2.1 General 8 5.2.2 Cooling mode .8 5.2.3 Heating mode .9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2009/142/EC relatin

20、g to appliances burning gaseous fuels (Gas Appliances Directive) 10 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) No 813/2013 11 Annex ZC (informative) Relationship between this European Standard and the requirements of Commissi

21、on Regulation (EC) No 811/2013 12 Bibliography . 13 DIN EN 12309-5:2015-03 EN 12309-5:2014 (E) 3 Foreword This document (EN 12309-5:2014) has been prepared by Technical Committee CEN/TC 299 “Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps an

22、d domestic gas-fired washing and drying appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015, and conflicting national standards shall be

23、 withdrawn at the latest by June 2015. This document supersede EN 12309-2:2000. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This d

24、ocument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, Annex ZB and Annex ZC, which are integral parts of this

25、document. This standard comprises the following parts under the general title, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW: Part 1: Terms and definitions; Part 2: Safety; Part 3: Test conditions; Part 4: Test methods; Part 5: Requirements; Part

26、6: Calculation of seasonal performances; Part 7: Specific provisions for hybrid appliances; Part 8: Environmental aspects. EN 12309-1 and EN 12309-2 supersede EN 12309-1:1999, whereas EN 12309-1, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 supersede EN 12309-2:2000. EN 12309-1, EN

27、 12309-2, EN 12309-3, EN 12309-4, EN 12309-5, EN 12309-6, and EN 12309-7 have been prepared to address the essential requirements of the European Directive 2009/142/EC relating to appliances burning gaseous fuels (see Annex ZA of prEN 12309-2:2013 for safety aspects and Annex ZA of EN 12309-5:2014 f

28、or rational use of energy aspects). These documents are linked to the Energy Related Products Directive (2009/125/EC) in terms of tests conditions, tests methods and seasonal performances calculation methods under Mandate M/495 (see EN 12309-3:2014, Annex ZA; EN 12309-4:2014, Annex ZA; EN 12309-6:20

29、14, Annex ZA and EN 12309-7:2014, Annex ZA and prEN 12309-2:2013, Annex ZB and EN 12309-5:2014, Annex ZB). These documents will be reviewed whenever new mandates could apply. DIN EN 12309-5:2015-03 EN 12309-5:2014 (E) 4 EN 12309-8 (“Environmental aspects”) deals with the incorporation of the Resolut

30、ion BT 27/2008 regarding CEN approach on addressing environmental issues in product and service standards. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cro

31、atia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

32、the United Kingdom. DIN EN 12309-5:2015-03 EN 12309-5:2014 (E) 5 1 Scope 1.1 Scope of EN 12309 Appliances covered by this standard include one or a combination of the following: gas-fired sorption chiller; gas-fired sorption chiller/heater; gas-fired sorption heat pump. This European Standard applie

33、s to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery. This European Standard applies to appliances having flue gas systems of type B and type C (according to CEN/TR 1749) and to appliances designed for outdoor installations. EN 12309 does no

34、t apply to air conditioners, it only applies to appliances having: integral burners under the control of fully automatic burner control systems, closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated, mechanical mean

35、s to assist transportation of the combustion air and/or the flue gas. The above appliances can have one or more primary or secondary functions (i.e. heat recovery - see definitions in EN 12309-1:2014). In the case of packaged units (consisting of several parts), this European Standard applies only t

36、o those designed and supplied as a complete package. The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309. Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309. All th

37、e symbols given in this text should be used regardless of the language used. 1.2 Scope of this Part 5 of EN 12309 This part of EN 12309 specifies the requirements for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW. This part of EN 12309 deals parti

38、cularly with the requirements relating to the declaration of capacity and energy efficiency performance. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition

39、cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12309-1:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 1: Terms and definitions DIN EN 12309-5:2015-03 EN 12309-5

40、:2014 (E) 6 prEN 12309-2:20131Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 2: Safety EN 12309-3:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 3: Test conditions EN 12309-4:2014,

41、 Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 4: Test methods EN 12309-6:2014, Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 6: Calculation of seasonal performances EN 12309-7:2014, G

42、as-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Part 7: Specific provisions for hybrid appliances 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12309-1:2014 apply. When GUE (Gas Utilization Efficienc

43、y) or SPER (Seasonal Primary Energy Ratio) values are stated according to Clause 4 (Requirements) and to Clause 5 (Marking and instructions), these values need to be expressed in percentage terms. 4 Requirements 4.1 Cooling capacity rating and energy performance 4.1.1 Primary functions The rated coo

44、ling capacity corresponding to Standard Rating conditions given in EN 12309-3:2014, Table 3, together with the gas utilization efficiency under the same conditions shall be specified in the instructions of the appliance. When measured under the appropriate test conditions given in EN 12309-3:2014, a

45、nd in accordance with the methods of test described in EN 12309-4:2014, it shall be verified that the rated cooling capacity and the gas utilization efficiency are not less than those stated in the instructions. If the rated cooling capacities or gas utilization efficiency corresponding to applicati

46、on rating conditions given in EN 12309-3:2014, Table 3 are specified in the instructions of the appliance, these shall also be verified. When measured under the appropriate test conditions given in EN 12309-3:2014, and in accordance with the methods of test described in EN 12309-4:2014, it shall be

47、verified that the corresponding rated cooling capacity and, if applicable, the gas utilization efficiency are not less than those stated in the instructions. If a rated cooling capacity or gas utilization efficiency for the primary function which relates to conditions other than those given in EN 12

48、309-3:2014 is specified in the instructions of the appliance, the claim(s) shall be verified under the conditions specified in the instructions of the appliance. 4.1.2 Secondary functions If a rated heating capacity is specified in the instructions of the appliance, the corresponding gas utilization efficiency and the conditions (water temperature and flow rate) under which the claims are made shall also be stated. It shall be verified under these conditions and under EN 12309-4:2014 appropriat