DIN EN 12374-2009 Packaging - Flexible tubes - Terminology English version of DIN EN 12374 2009-09《包装 软管 术语 英文版本DIN EN 12374-2009-09》.pdf

1、September 2009DEUTSCHE NORM English price group 12No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 01.040.55; 55.120!$Y

2、c)“1546406www.din.deDDIN EN 12374Packaging Flexible tubes TerminologyEnglish version of DIN EN 12374:2009-09Packmittel Tuben TerminologieEnglische Fassung DIN EN 12374:2009-09SupersedesDIN EN 12374:1998-12www.beuth.deDocument comprises 22 pagesDIN EN 12374:2009-09 National foreword This standard has

3、 been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee NA 115-02-08 AA Tuben. Amendments This standard differs fro

4、m DIN EN 12374:1998-12 as follows: a) The term “Tactile warnings of danger” has been added to metallic (1.4.8) and flexible plastic tubes (1.4.2). b) Figure 2 “Plastic tubes” and Figure 3 “Laminated tubes” have been modified. c) The structure of the standard has been modified. d) The standard has be

5、en editorially revised. Previous editions DIN EN 12374: 1998-12 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12374 June 2009 ICS 01.040.55; 55.120 Supersedes EN 12374:1998 English Version Packaging Flexible tubes Terminology Emballage Tubes souples Terminologie Packmittel Tuben Terminologi

6、e This European Standard was approved by CEN on 20 May 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere

7、nces concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member i

8、nto its own language and notified to the CEN Management Centre has the same status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia

9、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels

10、2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12374:2009: EEN 12374:2009 (E) 2 Contents PageForeword . 31 Scope . 42 Terms and definitions 43 Specific terms for metallic tubes 44 Specific terms for plastics tubes 115 Specifi

11、c terms for laminated tubes 16DIN EN 12374:2009-09 EN 12374:2009 (E) 3 Foreword This document (EN 12374:2009) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by

12、 publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

13、CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12374:1998. It is based on the professional recommendation of the European tube manufacturers association (etma). It consists of a series of simplified drawings with number codes which id

14、entify the various parts and which in turn refer to their definition in the three official languages of CEN. This document includes the following clauses: 2 General definitions; 3 Specific terms for metallic tubes (aluminium, tin); 4 Specific terms for plastics tubes; 5 Specific terms for laminated

15、tubes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

16、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12374:2009-09 EN 12374:2009 (E) 4 1 Scope This standard defines the technical vocabulary in German, French and English, widely in

17、 use for flexible tubes. It is applicable to metal, plastic, multilayer or laminated tubes that are used for packing pharmaceutical, cosmetic, hygiene, food and other domestic or industrial products. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply

18、. 2.1 flexible tube container of flexible metal, plastics or laminate which can be sealed in such a manner that its content, although readily discharged in any desired quantity by squeezing, is protected against external contamination during the whole period of use 2.2 shoulder moulded or extruded c

19、omponent part of a total tube body which forms the nozzle end of the tube 2.3 nozzle outlet of a flexible tube through which the content is expelled by squeezing the wall of the tube 2.4 tamper evident nozzle nozzle which has the orifice closed EXAMPLE Nozzle closed by a thin diaphragm that can be p

20、ierced. 2.5 cap closure for the nozzle end of a flexible tube 3 Specific terms for metallic tubes The different parts of the tube are represented and identified in Figure 1. Table 1 allows the corresponding terms to be found in German, French and English. DIN EN 12374:2009-09 EN 12374:2009 (E) 5 d1

21、= 1.7.d2 = 1.8.d3= 1.9.l1 = 1.10.l2 = 1.11.s1= 1.12.s2 = 1.13.K62 = 1.14.1.3.1.1.3.2.1.3.3.1.3.4.1.3.5.1.5.1.6.d1l1s1s2l21.1.d2d3 1.3.1.2.1.4.2.2.2.4.2.3.2.3.3.2.3.1.2.3.2.2.2.1.M6-5-4.2.1.4.2.2.4.2.3.4.2.4.4.2.4.1.3.1.4.3.1.1.3.3.3.2.-4-3-1-2-2.5.2.1.5.1.5.2.5.3.5.4.K62Figure 1 Metallic Tubes DIN E

22、N 12374:2009-09 EN 12374:2009 (E) 6 Table 1 Specific terms for metallic tubes METALLTUBEN TUBES METALLIQUES METALLIC TUBES 1 Blanke Tube 1.1 Tubenhals 1.1.1. Metall 1.1.2. Kunststoff 1.1.3. Grundlackiert 1.2 Tubengewinde 1.2.1. Metrisches Gewinde 1.2.2. Sondergewinde 1.3 Tubenhalsffnung 1.3.1. Rund

23、1.3.2. Rund, klein (Sparffnung) 1.3.3. Schlitzfrmig 1.3.4. Sternfrmig 1.3.5. verschlossen (Membran) 1.3.6. Garnierstern mit Membran 1.3.7. Abreimembran 1.4 Tubenschulter 1.4.1. Glatt 1.4.2. Gerillt 1.4.3. Poliert 1.4.4. Gebrstet 1.4.5. Gedreht 1.4.6. Lackiert 1.4.7. Geprgt 1.4.8. Tastbare Gefahrenhi

24、nweise 1.5 Tubenmantel 1.5.1. Zylindrisch 1.5.2. Konisch 1.6 Tubenende 1.7 Tuben-Nenndurchmesser 1.8 Gewinde-Nenndurchmesser 1 Tube brut 1.1 Tige 1.1.1. Mtallique 1.1.2. Plastique 1.1.3. Laque 1.2 Filetage 1.2.1. Mtrique 1.2.2. Spcial 1.3 Orifice 1.3.1. Rond 1.3.2. Rond, petite ouverture 1.3.3. Rect

25、angulaire 1.3.4. En toile 1.3.5. Opercul 1.3.6. Etoile garniture avec membrane 1.3.7. Membrane 1.4 Epaule (collet) 1.4.1. Lisse 1.4.2. Cercle 1.4.3. Polie 1.4.4. Brosse 1.4.5. Lame ( loutil) 1.4.6. Laque 1.4.7. Grave 1.4.8. Repre tactile 1.5 Jupe 1.5.1. Cylindrique 1.5.2. Conique 1.6 Base de jupe 1.

26、7 Diamtre nominal du tube 1.8 Diamtre nominal du filetage 1 Plain undecorated tube 1.1 Tube nozzle 1.1.1. Metal 1.1.2. Plastics 1.1.3. Enamelled 1.2 Tube thread 1.2.1. Metric thread 1.2.2. Special thread 1.3 Tube nozzle orifice 1.3.1. Round 1.3.2. Round, small (economy opening) 1.3.3. Slit shaped 1.

27、3.4. Star shaped 1.3.5. Closed (membrane) 1.3.6. Star shaped with membrane 1.3.7. Membrane to remove 1.4 Tube Shoulder 1.4.1. Smooth 1.4.2. Chased 1.4.3. Polished 1.4.4. Brush-finished 1.4.5. Twisted 1.4.6. Lacquered 1.4.7. Stamped 1.4.8. Tactile warnings of danger 1.5 Tube body 1.5.1. Cylindrical 1

28、.5.2. Conical 1.6 Tube open end 1.7 Nominal diameter of tube 1.8 Nominal diameter of thread DI N EN 12374: 2 009- 09 7 Table 1 (continued) METALLTUBEN TUBES METALLIQUES METALLIC TUBES 1.9 Durchmesser der Tubenhalsffnung 1.10 Mantel-Nennlnge 1.11 Tubenhalslnge 1.12 Manteldicke 1.13 Schulterdicke 1.14

29、 Schulterwinkel 2 Fertige Tube 2.1 Innenschutzlackierung 2.2 Auenlackierung 2.2.1. Unlackierter Rand am Tubenende 2.3 Bedruckung 2.3.1. Tastmarke (Codierung) 2.3.2. Herstellerkennzeichen 2.3.3. Druckberlappung 2.4 berlackierung 2.5 Dichtungsring im Tubenende 2.5.1. Dichtgummi 2.5.2. Heisiegellack 3

30、Tube mit Spezialhals 3.1 Tube mit Metall-Injektionsspitze 3.1.1. Konisch 3.1.2. Mit runder ffnung 3.1.3. Mit Membran (geschlossen) 3.1.4. Ohne Gewinde 1.9 Diamtre de lorifice 1.10 Longueur nominale du tube 1.11 Hauteur de la tige 1.12 Epaisseur de la jupe 1.13 Epaisseur du collet 1.14 Angle du colle

31、t 2 Tube fini 2.1 Vernis intrieur de protection 2.2 Laque extrieure 2.2.1. Base du tube non laque 2.3 Impression 2.3.1. Repre de fermeture 2.3.2. Rfrence du fabricant 2.3.3. Raccord dimpression 2.4 Vernis extrieur de protection 2.5 Joint dtanchit 2.5.1. Joint dtanchit 2.5.2. Joint thermoscelable 3 T

32、ube tige spciale 3.1 Tube canule mtallique 3.1.1. Conique 3.1.2. A orifice rond 3.1.3. Opercul 3.1.4. Sans filetage 1.9 Tube nozzle orifice diameter 1.10 Nominal length of tube 1.11 Height of tube nozzle 1.12 Thickness of body 1.13 Thickness of shoulder 1.14 Shoulder angle 2 Finished tube 2.1 Intern

33、al protective varnish 2.2 External enamel 2.2.1. Open end of tube not enamelled 2.3 Printing 2.3.1. Registration mark 2.3.2. Manufacturers design 2.3.3. Print overlap 2.4 External varnish 2.5 End sealant 2.5.1. End sealant 2.5.2. Heat sealing lacquer 3 Tube with special nozzle 3.1 Tube with metal ca

34、nnula nozzle 3.1.1. Conical 3.1.2. With round orifice 3.1.3. With membrane (closed) 3.1.4. Without thread EN 12374: 2009 ( E ) DI N EN 12374: 2 009- 09 8 Table 1 (continued) METALLTUBEN TUBES METALLIQUES METALLIC TUBES 3.2 Tube mit aufgesetztem Tubenhals 3.2.1. Gewindering 3.2.2. Gewindenippel 3.3 T

35、ube mit aufgesetzter Kunststoffkanle 3.3.1. Aufgeprellt 3.3.2. Aufgeschraubt 4 Tube gefllt und durch Falzung verschlossen 4.1 Tubenflanke 4.2 Tubenfalz 4.2.1. Doppelt 4.2.2. Dreifach 4.2.3. Umgekehrt dreifach 4.2.4. Sattel 5 Zubehr 5.1 Tubenverschluss 5.1.1. Auenform des Verschlusses 5.1.1.1. Achtka

36、nt mit zylindrischem Ansatz 5.1.1.2. Rund gerndelt, zylindrisch 5.1.1.3. Konisch 5.1.1.4. Zylindrisch 5.1.1.5. Klappdeckelverschluss 5.1.1.6. Prellverschluss (ohne Gewinde) 5.1.1.7. Kindergesicherter Verschlu 5.1.1.8. Originalittsverschlu 3.2 Tube tige plastique rapporte avec embout 3.2.1. Embout fi

37、let 3.2.2. Embout canule filet 3.3 Tube canule plastique 3.3.1. Encliquete 3.3.2. Visse 4 Tube rempli et ferm par pliage 4.1 Bord du tube 4.2 Pli 4.2.1. Double 4.2.2. Triple 4.2.3. Triple invers 4.2.4. En selle cavalier 5 Accessoires 5.1 Bouchon 5.1.1. Forme extrieure 5.1.1.1. Octogonal avec base cy

38、lindrique 5.1.1.2. Rond stri avec caractristiques cylindriques 5.1.1.3. Conique 5.1.1.4. Cylindrique (tambour) 5.1.1.5. Avec un obturateur charnire 5.1.1.6. Capuchon canule (sans filetage) 5.1.1.7. Capuchon de scurit pour enfants 5.1.1.8. Fermeture inviolable 3.2 Tube with applied plastics nozzle 3.

39、2.1. Threaded 3.2.2. Threaded cannula 3.3 Tube with plastics cannula 3.3.1. Pressed on 3.3.2. Screwed on 4 Tube filled and then closed by crimping 4.1 Edge of tube 4.2 Tube crimp 4.2.1. Double 4.2.2. Triple 4.2.3. Triple inverted 4.2.4. Saddle-back 5 Fittings 5.1 Tube cap 5.1.1. External shape of ca

40、p 5.1.1.1. Octagonal with cylindrical base 5.1.1.2. Round milled edged cap 5.1.1.3. Conical 5.1.1.4. Cylindrical 5.1.1.5. Flip top cap 5.1.1.6. Slip on cap (without thread) 5.1.1.7. Child resistant closure 5.1.1.8. Tamper evident closure EN 12374: 2009 ( E ) DI N EN 12374: 2 009- 09 9 Table 1 (conti

41、nued) METALLTUBEN TUBES METALLIQUES METALLIC TUBES 5.1.2. Verschlussmontage 5.1.2.1. Aufgeschraubt 5.1.2.1.1. Ausgerichtet 5.1.2.1.2. Nicht ausgerichtet 5.1.2.2. Aufgeprellt 5.1.2.2.1. Ausgerichtet 5.1.2.2.2. Nicht ausgerichtet 5.1.3. Funktion 5.1.3.1. Durchdrcken (der Membran) 5.1.3.2. Durchschneid

42、en (der Membran) 5.1.3.3. Dichtkegel 5.1.3.4. Dichtkalotte 5.1.3.5. Planflche 5.1.3.6. Dichtkalotte mit Aufstechdorn 5.1.3.7. Dichtkalotte und separate Membran 5.1.3.8. Dichtspitze 5.1.3.9. Dichtrille 5.1.3.10. Dichtansatz 5.1.3.11. Dichtperle 5.1.3.12. Auenabdichtung 5.1.4. Verschlussmaterial 5.1.4

43、.1. Polyethylen 5.1.4.2. Polypropylen 5.1.4.3. Andere Materialien 5.2 Dichtungseinlage fr Tubenverschluss 5.3 Zwischenring fr Membrantuben 5.4 Einsatz 5.1.2. Types dassemblage 5.1.2.1. Viss 5.1.2.1.1. Orient 5.1.2.1.2. Non orient 5.1.2.2. Bouchon casquette 5.1.2.2.1. Orient 5.1.2.2.2. Non orient 5.1

44、.3. Fonction 5.1.3.1. Perforateur 5.1.3.2. Dfonceur 5.1.3.3. A cne dtanchit 5.1.3.4. A goutte de suif dtanchit 5.1.3.5. A fond plat 5.1.3.6. A calotte dtanchit 5.1.3.7. A goutte de suif dtanchit et membrane 5.1.3.8. A pointe dtanchit 5.1.3.9. A double lvres dtanchit 5.1.3.10. A oreille dtanchit 5.1.

45、3.11. A bille dtanchit 5.1.3.12. A cne extrieur dtanchit 5.1.4. Matire du bouchon 5.1.4.1. Polythylne 5.1.4.2. Polypropylne 5.1.4.3. Autres matires 5.2 Joint du bouchon 5.3 Bague intermdiaire (pour tubes operculs) 5.4 Insert 5.1.2. Mounting of closures 5.1.2.1. Screwed on 5.1.2.1.1. Orientated 5.1.2

46、.1.2. Not orientated 5.1.2.2. Snapped on 5.1.2.2.1. Orientated 5.1.2.2.2. Not orientated 5.1.3. Function 5.1.3.1. Piercable membrane 5.1.3.2. Cut through (membrane) 5.1.3.3. Sealing cone 5.1.3.4. Sealing cup 5.1.3.5. Flat surface 5.1.3.6. Sealing cup with spike 5.1.3.7. Sealing cup and membrane 5.1.

47、3.8. Sealing tip 5.1.3.9. Sealing ribs 5.1.3.10. Sealing lug 5.1.3.11. Beading 5.1.3.12. Outer seal 5.1.4. Cap material 5.1.4.1. Polyethylene 5.1.4.2. Polypropylene 5.1.4.3. Other materials 5.2 Wadded cap 5.3 Intermediate ring for membrane tubes 5.4 Insert EN 12374: 2009 ( E ) DI N EN 12374: 2 009-

48、09 10 Table 1 (continued) METALLTUBEN TUBES METALLIQUES METALLIC TUBES 6 Werkstoff 6.1 Metall 6.1.1. Aluminium 6.1.2. Zinn 6.2 Butze 6.2.1. Ohne Mittelloch 6.2.1.1. Flach 6.2.1.2. Vorgeformt 6.2.2. Mit Mittelloch 6.2.2.1. Flach 6.2.3. Oberflchenbehandelt 6.2.3.1. Getrommelt 6.2.3.2. Gescheuert 6.2.3

49、.3. Gestrahlt 6 Matires 6.1 Mtal 6.1.1. Aluminium 6.1.2. Etain 6.2 Pion 6.2.1. Plein 6.2.1.1. Plat 6.2.1.2. Bomb 6.2.2. Perfor 6.2.2.1. Plat 6.2.3. Etat de surface pion 6.2.3.1. Barat 6.2.3.2. Vibr 6.2.3.3. Grenaill 6 Materials 6.1 Metal 6.1.1. Aluminium 6.1.2. Tin 6.2 Slugs 6.2.1. Without centre hole 6.2.1.1. Flat 6.2.1.2. Preformed 6.2.2. With centre hole 6.2.2.1. Flat 6.2.3. Surface tr