DIN EN 12431-2013 Thermal insulating products for building applications - Determination of thickness for floating floor insulating products German version EN 12431 2013《建筑物用隔热产品 浮隔.pdf

1、May 2013 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.

2、100.60!%$*i“2010770www.din.deDDIN EN 12431Thermal insulating products for building applications Determination of thickness for floating floor insulating products;English version EN 12431:2013,English translation of DIN EN 12431:2013-05Wrmedmmstoffe fr das Bauwesen Bestimmung der Dicke von Dmmstoffen

3、 unter schwimmendem Estrich;Englische Fassung EN 12431:2013,Englische bersetzung von DIN EN 12431:2013-05Produits isolants thermiques destins aux applications du btiment Dtermination de lpaisseur des produits disolation pour sol flottant;Version anglaise EN 12431:2013,Traduction anglaise de DIN EN 1

4、2431:2013-05SupersedesDIN EN 12431:2007-06www.beuth.deDocument comprises 11 pagesIn case of doubt, the German-language original shall be considered authoritative.04.13 DIN EN 12431:2013-05 2 A comma is used as the decimal marker. National foreword This document (EN 12431:2013) has been prepared by T

5、echnical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany) The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-56-60 AA Wrmedmmstoffe. Amendme

6、nts This standard differs from DIN EN 12431:2007-06 as follows: a) the standard has been editorially revised. Previous editions DIN 18165: 1957-08, 1963-03 DIN 18164: 1963-01, 1966-08 DIN 18164-2: 1972-12, 1979-06, 1990-12, 1991-03 DIN 18165-2: 1975-01, 1987-03 DIN EN 12431: 1998-08, 2007:06 EUROPEA

7、N STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12431 March 2013 ICS 91.100.60 Supersedes EN 12431:1998 English Version Thermal insulating products for building applications Determination of thickness for floating floor insulating products Produits isolants thermiques destins aux applications du btime

8、nt Dtermination de lpaisseur des produits disolation pour sol flottant Wrmedmmstoffe fr das Bauwesen Bestimmung der Dicke von Dmmstoffen unter schwimmendem Estrich This European Standard was approved by CEN on 15 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulation

9、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. Th

10、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN mem

11、bers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

12、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by an

13、y means reserved worldwide for CEN national Members. Ref. No. EN 12431:2013: E 2 Contents Page Foreword . 3 1 Scope 5 2 Normative references . 5 3 Terms and definitions 5 4 Principle 5 5 Apparatus . 5 6 Test specimens 6 7 Procedure . 7 8 Calculation and expression of results 8 9 Accuracy of measurem

14、ent . 8 10 Test report 8 DIN EN 12431:2013-05 EN 12431:2013 (E)3 Foreword This document (EN 12431:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a natio

15、nal standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of p

16、atent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12431:1998. The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is o

17、ne of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the ap

18、proximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other

19、 areas where it is relevant. This European test standard is one of the following group of interrelated standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88: EN 822, Thermal insulating product

20、s for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applicatio

21、ns Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1603, Thermal insulating products for building applications Determ

22、ination of dimensional stability under constant normal laboratory conditions (23 C/50 % relative humidity) EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1605, Thermal insulating products fo

23、r building applications Determination of deformation under specified compressive load and temperature conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep DIN EN 12431:2013-05 EN 12431:2013 (E) 4 EN 1607, Thermal insulating products for buildin

24、g applications Determination of tensile strength perpendicular to faces EN 1608, Thermal insulating products for building applications Determination of tensile strength parallel to faces EN 1609, Thermal insulating products for building applications Determination of short-term water absorption by pa

25、rtial immersion EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for buildin

26、g applications Determination of long-term water absorption by immersion EN 12088, Thermal insulating products for building applications Determination of long-term water absorption by diffusion EN 12089, Thermal insulating products for building applications Determination of bending behaviour EN 12090

27、, Thermal insulating products for building applications Determination of shear behaviour EN 12091, Thermal insulating products for building applications Determination of freeze-thaw resistance EN 12429, Thermal insulating products for building applications Conditioning to moisture equilibrium under

28、specified temperature and humidity conditions EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building applications Determination of thickness for floating floor insulating products EN 13793, Therma

29、l insulating products for building applications Determination of behaviour under cyclic loading EN 13820, Thermal insulating materials for building applications Determination of organic content According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following c

30、ountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

31、 Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 12431:2013-05 EN 12431:2013 (E)5 1 Scope This European Standard specifies the equipment and procedures for determining the thickness of thermal insulating products for impact sound insul

32、ation in floating floor applications. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the re

33、ferenced document (including any amendments) applies. EN 12085, Thermal insulating products for building applications Determination of linear dimensions of test specimens 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 thickness dLthickness o

34、f the product under a load of 250 Pa 3.2 thickness dFthickness of the product under a load of 2 kPa 3.3 thickness dBthickness of the product under a load of 2 kPa after application of a short time additional load (48 kPa) 4 Principle The thickness is determined as the distance measured between a rig

35、id flat base plate on which the test specimen rests and a rigid flat pressure plate exerting different specified pressures on the top surface of the test specimen. 5 Apparatus 5.1 Dial gauge, which permits reading to 0,1 mm, mounted on a rigid frame fastened to a rigid flat base plate. 5.2 Device, w

36、ith the same accuracy with two readings of the thickness/deformation placed symmetrically on a diagonal on the upper square plate of the device. The mean of these two readings is the thickness/deformation. 5.3 Base plate and pressure plate, which shall be at least as large as the test specimen. 5.4

37、Device, which exerts a total pressure on the test specimen of (250 5) Pa (including the force exerted by the dial gauge). DIN EN 12431:2013-05 EN 12431:2013 (E) 6 5.5 Device, which exerts a total pressure on the test specimen of (2 000 20) Pa (including the force exerted by the dial gauge). 5.6 Devi

38、ce, which exerts a total pressure on the test specimen of (50 000 500) Pa. Alternative to 5.1 through 5.6, a compression testing machine suited to the range of force and displacement involved can be used. The compression testing machine shall have two very rigid, polished, square plane parallel plat

39、es of which the length of one side is at least as large as the test specimen side to be tested. One of the plates shall be fixed and the other movable, if appropriate, with a centrally positioned knee ball joint to ensure that only axial force is applied to the test specimen. A device for measuring

40、the displacement shall be fitted to the compression testing machine, which allows measurement of the displacement of the movable plate and which permits a reading to 0,1 mm. A sensor shall be fitted to one of the machine plates to measure the force produced by the reaction of the test specimen upon

41、the plates. This sensor shall be such that its own deformation during the course of the measuring operation is negligible compared with that being measured. If not, it shall be taken to account by calculation. In addition, it shall allow continuous measurement of the force permitting a reading into

42、1 %. When measurements are made on a movable plate and not in the axis, two sensors shall be used placed symmetrically versus the axis. The mean value of the two readings is used. 6 Test specimens 6.1 Dimensions of test specimens The thickness of the test specimens shall be the original product thic

43、kness. The test specimens shall be squarely cut and square having sides of (200 1) mm. The length and width shall be determined in accordance with EN 12085, with an accuracy of 1 mm. 6.2 Number of test specimens The number of test specimens shall be as specified in the relevant product standard. If

44、the number is not specified, then ten test specimens shall be used. In the absence of a product standard or any other European Technical Specification, the number of test specimens may be agreed between parties. 6.3 Preparation of test specimens The test specimens shall be cut so that they do not in

45、clude product edges. The test specimens shall be prepared by methods that do not change the original structure of the product. Any skins, facings and/or coatings shall be retained. 6.4 Conditioning of test specimens The test specimens shall be stored for at least 6 h at (23 5) C. In case of dispute

46、they shall be stored at (23 2) C and (50 5) % relative humidity for the time specified in the relevant product standard. DIN EN 12431:2013-05 EN 12431:2013 (E)7 7 Procedure 7.1 Test conditions The test shall be carried out at (23 5) C. In case of dispute it shall be carried out at (23 2) C and (50 5

47、) % relative humidity. 7.2 Test procedure 7.2.1 General Figure 1, below, indicates the procedures to be followed for the determination of the test specimen thicknesses. 7.2.2 Thickness, dLLay the test specimen on the rigid, flat and horizontal base plate ensuring that the measuring area is in contac

48、t with the base plate. Place the test specimens, if faced or coated on one side, with the facing or coating against the base plate. Load the test specimen with a device exerting a pressure of 250 Pa. Measure the thickness (120 5) s after placing the pressure plate in position, to the nearest 0,1 mm. The thickness may be measured with the dial gauge at two diagonally opposite corners or in the ce