DIN EN 12477-2005 Protective gloves for welders German version EN 12477 2001 + A1 2005《焊工用防护手套》.pdf

1、DEUTSCHE NORM No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).September 2005DIN EN 12477English price group 8 www.din.

2、de www.beuth.de12.05 9661625Document comprises 9 pages.Protective gloves for welders(includes Amendment A1:2005)English version of DIN EN 12477:2001 + A1:2005Schutzhandschuhe fr Schweier (enthlt nderung A1:2005)National forewordThis standard includes safety specications relating to the risk of elect

3、ric shock.This standard has been prepared by CEN/TC 162 Protective clothing including hand and arm protection and lifejackets (Secretariat: Germany), Working Group 8 Protective gloves.The responsible German body involved in its preparation was the Normenausschuss Persnliche Schutz-ausrstung (Persona

4、l Protective Equipment Standards Committee), Technical Committee NPS 5-8 Schutz-handschuhe.AmendmentsThis standard differs from the January 2002 edition as follows:a) Optional requirements for gloves intended for arc welding have been specied (cf. subclause 3.4).b) A test for determining the electri

5、cal vertical resistance of gloves intended for arc welding in normal conditions of use has been included (cf. subclause 5.10).c) Details of the information supplied by the manufacturer have been amended.Previous editionsDIN 4841-4: 1987-01DIN EN 12477: 2002-01ICS 13.340.40 Supersedes January 2002 ed

6、ition.!,e3 105V. The testing shall be according to 5.10.Page 5 EN 12477:2001 + A1:2005Page 6 EN 12477:2001 + A1:2005Page 7 EN 12477:2001 + A1:20055.10 Test for gloves intended for arc welding in normal conditions of use Electrical vertical resistance The material for welders protective gloves shall

7、be conditioned for at least 24 h in an atmosphere having a temperature of (20 t 2) C and a relative humidity of (85 t 3) %. Testing in accordance with EN 1149-2 shall be carried out under these conditions or within 5 min of removal from this atmosphere. The vertical electrical resistance of each dif

8、fering part of the glove or gauntlet including the cuff shall be tested. If the external surface of the glove on its own exceeds the requirements, then only the differing external surfaces need to be tested. However, if the external surface does not pass but the combination of the external surface a

9、nd the lining do meet the requirements, then each differing construction of the glove and cuff shall be tested. - When gloves are intended for arc welding: these gloves do not provide protection against electric shock caused by defective equipment or live working, and the electrical resistance is reduced if gloves are wet, dirty or soaked with sweat, this could increase the risk. Page 8 EN 12477:2001 + A1:2005Bibliography1 EN 60903, Live working - Gloves and mitts of insulating material (IEC 60903:2002 + corrigendum 2003, modi-ed)