DIN EN 1266-2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and or flue gases German version EN 1266 2002《鼓风机送入助燃空气和排出废.pdf

1、DEUTSCHE NORM March 2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases English version of DIN EN 1266 DIN EN 1266 ICs 97.1 00.20 Konvektions-Raumheizer fr gasfrmige Brennstoffe mit geblseuntersttzer Verbrennungsluftzu- und/o

2、der A bg asa bf h ru n g European Standard EN 1266 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker. This standard includes safety requirements within the meaning of the Gertesicherheitsgesetz (German Equipment Safety Law). National foreword This standard has been prepa

3、red by CEN/TC 62 Independent gas-fired space heaters (Secretariat: United King dom). The responsible German body involved in its preparation was the Normenausschuss Heiz-, Koch- und Wrmgert (Heating and Cooking Appliances Standards Committee). EN comprises 134 pages. O No part of this standard may b

4、e reproduced without the prior permission of DINDeutsches Institut frNormung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). Ref. No. DIN EN 1266 : 2003-03 English price group 32 Sales No. 7 732 07.03 EUROPEAN STANDARD NORME

5、 EUROPENNE EUROPISCHE NORM EN 1266 October 2002 ICs 97.1 00.20 English version Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases Appareils de chauffage indpendants convection utilisant les combustibles gazeux et intgrant un vent

6、ilateur pour faciliter lalimentation en air comburant eVou lvacuation des produits de cumbustion Konvektions-Raumheizer fr gasfr- mige Brennstoffe mit geblseunter- sttzer Verbrennungsluftzu- und/oder Abgasabf hrung This European Standard was approved by CEN on 2001 -01 -1 1. CEN members are bound to

7、 comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand- ards may be obtained on application to the Manag

8、ement Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the of

9、ficial versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer- land, and the United Kingdom. CEN European Committ

10、ee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Management Centre: rue de Stassart 36, B-1050 Brussels O 2002. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref. No. EN 1266 : 2002 E Page 2 EN 1266 : 20

11、02 Contents . Foreword 3 1 2 3 3.1 3.2 3.3 3.4 3.5 3.6 4 4.1 4.2 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.1 O 5.1 1 5.1 2 5.1 3 5.1 4 5.1 5 5.1 6 6 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.1 O 6.1 1 6.1 2 7 7.1 Scope 4 Normative references 4 5 Terms and definitions . 5 Independent gas-fired convection h

12、eaters . Gases 6 7 Appliance construction Adjusters and controls . 11 Appliance performance 12 Classification according to the nature of the gases used (categories) . 14 Marking of the appliance and packaging 14 Classification of appliances . 14 Classification according to the method of evacuating t

13、he products of combustion (types) . 17 Constructional requirements . 19 Conversion to different gases . 19 Materials and method of construction 20 Accessibility for use and maintenance . 21 Connections . 21 Soundness of the gas circuit . 22 Soundness of the combustion circuit . 22 Supply of combusti

14、on air and evacuation of combustion products . 23 Electrical equipment . 24 Safety in the event of fluctuation, interruption and restoration of the auxiliary energy . 24 Air proving devices . 25 Adjusting, control and safety devices 25 Ignition burner . 28 Burners . 29 Motors and fans . 29 Confirmat

15、ion of operation 29 Operational requirements 30 General . 30 Soundness of the gas circuit and combustion products circuit , and evacuation of the combustion products . 30 Temperature of various parts of the appliance 31 Ignition, cross-lighting and flame stability . 32 Combustion . 34 Sooting (live

16、fuel effect appliances only) . 34 Flame supervision device 36 Air proving device . 36 Efficiency . 38 Test methods . 38 General . 38 Gas pressure test points 29 Heat inputs . 31 Pressure governors 33 Spillage monitoring system (type B appliances only) . 35 Page 3 EN 1266 : 2002 7.2 7.3 7.4 7.5 7.6 7

17、.7 7.8 7.9 7.1 O 7.1 1 7.1 2 8 8.1 8.2 Soundness of the gas circuit and combustion products circuit, and evacuation of the combustion products 46 Heat inputs 48 Temperature of various parts of the appliance 50 Ignition, cross-lighting and flame stability 52 Combustion 58 Sooting (live fuel effect ap

18、pliances only) 63 Spillage monitoring system (type B appliances only) . 64 Flame supervision device 66 Air proving device 67 Efficiency 69 Marking and instructions 71 71 Marking . 74 Instructions . . . Pressure governors 57 . . . . . Annex A (informative) National situations Annex B (normative) Clas

19、sification of appliances 97 1 o9 combustion products evacuation ducts 114 118 1 20 121 Annex G (normative) Calculation of conversions of NO, 127 Annex H (normative) Apparatus for the determination of the smoke number 128 Annex I (informative) Means of identification of the types of gas in force in t

20、he various countries 129 Annex J (normative) Special national conditions 130 Annex K (informative) A-deviations 131 Annex ZA (informative) Clauses of this European Standard addressing essential 132 . Annex C (normative) Requirements and test methods for separate air supply and Annex D (normative) Hi

21、gh voltage ignition circuits . Annex E (informative) Gas valve arrangements Annex F (informative) Spillage test methods . . . . requirements or other provisions of EU Directives . Foreword This document (EN 12662002) has been prepared by Technical Committee CENTC 62“ Independent gas-fired space heat

22、ers“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2003, and conflicting national standards shall be withdrawn at the latest by April 2003. This d

23、ocument has been prepared under a mandate given to CEN by the Commission and the European Free Trade Association, and supports the essential requirements of Directive 90/396/EEC. For relationship with EU Directives, see informative annexZA, which is an integral part of thisdocument. According to the

24、 CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spa

25、in, Sweden, Switzerland and the United Kingdom. Page 4 EN 1266 : 2002 1 Scope This European Standard specifies the requirements and test methods for the construction, safety, marking and rational use of energy of independent gas-fired convection heating appliances that are fitted with fan-assisted a

26、tmospheric burners, or fully pre-mixed burners. This standard is applicable to independent convection heaters, burning gas having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as appliances: - that are wall mounted, free-standing or built-in; - that ha

27、ve a nominal heat input not exceeding 20 kW (based on the net calorific value). In addition, this standard is applicable to live fuel effect appliances. This standard is not applicable to: a) open fronted appliances to prEN 13278:1998; b) appliances fitted with automatic forced-draught burners to EN

28、 676; c) ducted-air appliances; d) appliances installed by means of a closure plate (see 3.3.3.8). This standard is only applicable to appliances which are intended to be type tested. Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary

29、 devices are not dealt with by this standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated

30、references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 88: 1991, Pressure governo

31、rs for gas appliances for inlet pressure up to 200 mbar EN 125: 1991 , Flame supervision devices for gas-burning appliances - Thermo-electric flame supervision devices EN 126: 1 995, Multifunctional controls for gas burning appliances EN 1 6 1 : 1 99 1 , Automatic shut-off valves for gas burners and

32、 gas appliances EN 257: 1 992, Mechanical thermostats for gas-burning appliances EN 298: 1993, Automatic gas burner control systems for gas burners and gas burning appliances with or without fans EN 437: 1 993, Test gases - Test pressures - Appliance categories Page 5 EN 1266 : 2002 EN 12067-1:1998,

33、 Gadair ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types prEN 13278:1998, Open fronted gas-fired independent space heaters EN 60335-1 : 1994, Safety of household and similar electrical appliances - Part 1 : General requirements (IEC 335- 1: 199 1) EN 60529:1991, De

34、grees of protection provided by enclosures (IP code) (IEC 529:1989) EN 60730-2-9:1995, Automatic electrical controls for household and similar use - Part 2: Particular requirements for temperature sensing controls CR 1404: 1994, Determination of emissions from appliances burning gaseous fuels during

35、 type-testing EN IS0 3166-1:1997, Codes for the representation of names of countries and their subdivisions - Part 1 : Country codes (IS0 3 166- 1: 1997) IS0 7- 1 : 1 994, Pipe threads where pressure-tight joints are made on the threads - Part 1: Designation, dimensions and tolerances IS0 228-1 : 1

36、994, Pipe threads where pressure-tight joints are not made on the threads - Part 1: Designation, dimensions and tolerances IS0 274: 1975, Copper tubes of circular section - Dimensions I EC 60479-1 : 1984, Effects of current passing through the human body - Part 1: General aspects I EC 60479-2: 1 987

37、, Effects of current passing through the human body - Part 2: Special aspects 3 Terms and definitions For the purposes of this standard the following terms and definitions apply: 3.1 Independent gas-fired convection heaters 3.1 .I convection heater convection appliance that is designed to heat a roo

38、m mainly by the emission of air heated by convection. Such an appliance may also contain radiant heating elements provided that it complies with all the requirements of this standard 3.1.2 forced convection heater convection appliance that incorporates a fan and thus allows an acceleration of the ci

39、rculation of the air in contact with the heating body. Such an appliance is designed to discharge air directly into the room in which the appliance is installed and not to be connected to a warm air distribution system 3.1.3 convection fan device to assist in the distribution of heated air 3.1.4 liv

40、e fuel effect convection heater convection appliance which simulates the visual effect of a solid fuel appliance Page 6 EN 1266 : 2002 3.1.5 open-fronted appliance appliance which has exposed flames or exposed incandescent areas 3.1.6 working surfaces those parts of an appliance, which, due to the n

41、ature of the appliance, have temperatures exceeding the limits specified in 6.4.1 excluding parts that are likely to be touched during operations carried out in the normal use of the appliance, for example, the area adjacent to control knobs Working surfaces do not include that part of any surface w

42、ithin 25 mm of parts that have to be touched or removed during normal operation of the appliance. 3.2 Gases 3.2.1 reference conditions - for calorific values, temperature: 15 OC; - for gas and air volumes dry, brought to 15 “C and an absolute pressure of 1 O1 3,25 mbar 3.2.2 calorific value quantity

43、 of heat produced by the combustion, at a constant pressure of 1 013,25 mbar, of unit volume or mass of gas, the constituents of the combustible mixture being taken at reference conditions and the products of combustion being brought back to the same conditions A distinction is made between: - the g

44、ross calorific value in which the water produced by combustion is assumed to be condensed. Symbol: Hs - the net calorific value in which the water produced by combustion is assumed to be in the vapour state. Symbol: H, Units: either: - megajoules per cubic metre (MJ/m3) of dry gas at the reference c

45、onditions; or - megajoules per kilogram (MJ/kg) of dry gas; - EN 437:1993. 3.2.3 relative density ratio of the masses of equal volumes of dry gas and dry air at the same conditions of temperature and pressure Symbol: d 3.2.4 Wobbe index ratio of the calorific value of a gas per unit volume and the s

46、quare root of its relative density under the same reference conditions. The Wobbe index is said to be gross or net according to whether the calorific value used is the gross or net calorific value Page 7 EN 1266 : 2002 Symbol: gross Wobbe index: W,; : net Wobbe index: W. Units: either: - megajoules

47、per cubic metre (MJ/m3) of dry gas at the reference conditions; or - megajoules per kilogram (MJ/kg) of dry gas. EN 437: 19931 3.2.5 test pressures gas pressures used to verify the operational characteristics of appliances using combustible gases. They consist of normal and limit pressures They are

48、expressed in millibars (mbar). NOTE 1 mbar = 100 Pa. 3.2.6 normal pressure pressure under which the appliances operate in nominal conditions, when they are supplied with the corresponding reference gas Symbol: fi 3.2.7 limit pressures pressures representative of the extreme variations in the applian

49、ce supply conditions Symbols: maximum pressure: pmax; minimum pressure: pmin. 3.2.8 pressure couple combination of two distinct gas distribution pressures applied by reason of the significant difference existing between the Wobbe indices within a single family or group in which: - the higher pressure corresponds only to gases of low Wobbe index; and - the lower pressure corresponds to gases of high Wobbe index. EN 437: 1 9931 3.3 Appliance construction 3.3.1 The gas circuit 3.3.1.1 inlet connection pari of the appliance intended to be connected to the gas s