DIN EN 12697-47-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 47 Determination of the ash content of natural asphalts German version EN 12697-47 2010《沥青混合物 热混沥.pdf

1、December 2010 Translation by DIN-Sprachendienst.English price group 7No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 93.080.20!$lUI“1735038www.din.deDDIN EN 12697-47Bituminous mixtures Test methods for hot mix asphalt Part 47: Determination of the ash content of natural asphaltsEnglish translation of DIN EN 12697-47:2010-12Asphalt Prfverfahren fr Heiasphalt Teil 47: Bestimmung des Aschegehaltes von NaturasphaltE

3、nglische bersetzung von DIN EN 12697-47:2010-12Mlanges bitumineux Mthodes dessai pour mlange hydrocarbon chaud Partie 47: Dtermination de la teneur en cendres des bitumes naturelsTraduction anglaise de DIN EN 12697-47:2010-12www.beuth.deDocument comprises pagesIn case of doubt, the German-language o

4、riginal shall be considered authoritative.1012.10 DIN EN 12697-47:2010-12 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its preparation w

5、as the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-10-10 AA Asphalt. 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-47 July 2010 ICS 93.080.20 English Version Bituminous mixtures Test methods for hot mix asphalt Part 47: Deter

6、mination of the ash content of natural asphalts Mlanges bitumineux Mthodes dessai pour mlange hydrocarbon chaud Partie 47: Dtermination de la teneur en cendres des bitumes naturels Asphalt Prfverfahren fr Heiasphalt Teil 47: Bestimmung des Aschegehaltes von NaturasphaltThis European Standard was app

7、roved by CEN on 26 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national st

8、andards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notifie

9、d to the CEN Management Centre has the same status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembour

10、g, Malta, Netherlands, Norway, Poland,Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of

11、 exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-47:2010: EEN 12697-47:2010 (E) 2 Contents Page Foreword 31 Scope 62 Normative references 63 Terms and definitions .64 Principle 65 Apparatus .66 Sample preparation .77 Procedure .78 Calculation

12、79 Precision .89.1 Repeatability .89.2 Reproducibility .810 Test report 8DIN EN 12697-47:2010-12 EN 12697-47:2010 (E) 3 Foreword This document (EN 12697-47:2010) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shal

13、l be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at the latest by January 2011. Attention is drawn to the possibility that some of the elements of this docu

14、ment may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder co

15、ntent EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Par

16、t 4: Bitumen recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum density EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bitumin

17、ous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-9, Bituminous mixtures Test method

18、s for hot mix asphalt Part 9: Determination of the reference density EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactability EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affinity between aggregate and bitumen EN 126

19、97-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Par

20、t 14: Water content DIN EN 12697-47:2010-12 EN 12697-47:2010 (E) 4 EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-17,

21、 Bituminous mixtures Test methods for hot mix asphalt Part 17: Particle loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen EN 12

22、697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or Marshall specimens EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: W

23、heel tracking EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test metho

24、ds for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 28:

25、Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen pre

26、paration by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor EN 12697-3

27、3, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing EN 12697-36, Bi

28、tuminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA DIN EN 12697-47:2010-12 EN 12697-47

29、2010 (E) 5 EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: In

30、situ drainability EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matter in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for

31、 hot mix asphalt Part 43: Resistance to fuel prEN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test prEN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturation Ageing Tensile Stiffness (SATS) Conditioni

32、ng Test prEN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low Temperature Cracking and Properties by Uniaxial Tension Tests EN 12697-47, Bituminous mixtures Test methods for hot mix asphalt Part 47: Determination of the ash content of natural asphalts this standard No exis

33、ting European Standard is superseded. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ

34、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12697-47:2010-12 EN 12697-47:2010 (E) 6 1 Scope This European Standard describes a test m

35、ethod to determine the ash content in natural asphalts (including lake asphalts), binders containing natural asphalts or bitumens. For the method to apply, it is essential that any mineral matter in the binder be finely divided and cannot exceed 45 % by mass. 2 Normative references The following ref

36、erenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 58, Bitumen and bituminous binders Sampling bituminous binders

37、3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 ash inorganic residue remaining after ignition at 650 C expressed as a proportional mass of the original sample 3.2 natural asphalt highly viscous liquid or semi-solid materials found in nature

38、and containing varying amounts of bitumen, as defined by solubility in carbon disulphide, that can be used in asphalt 4 Principle A sample of the natural asphalt is weighed into a crucible which is then gently heated until fuming ceases. The sample is then ignited at (650 50) C until free from carbo

39、n. 5 Apparatus 5.1 Silica, porcelain or platinum crucible, with a capacity of (120 20) ml. 5.2 Furnace, capable of heating the crucible to (650 50) C in a natural draft of air. NOTE An electrical muffle furnace is suitable for this purpose. 5.3 Desiccator (or other suitable container). 5.4 Gas burne

40、r, pipe-clay triangle and tripod. NOTE An electric pre-incinerator may be used instead of a gas burner. 5.5 Oven, capable of heating the material to 90 C above its softening point (optional). 5.6 Balance, of suitable capacity. 5.7 Spatula (optional). DIN EN 12697-47:2010-12 EN 12697-47:2010 (E) 7 5.

41、8 4 mm sieve (optional). 6 Sample preparation 6.1 Obtain a representative sample, basing sampling on the specifications given in EN 58. 6.2 For materials that can be crushed at ambient temperature (e.g. refined lake asphalt), break up at least 500 g of the material so that it can pass through the 4

42、mm sieve. 6.3 For materials that cannot be crushed at ambient temperature but can be softened by heating in an oven, heat the material in the oven to approximately 80 C to 90 C above its expected softening point, and then carefully stir with the spatula until it is probable that any mineral matter p

43、resent is uniformly dispersed. NOTE 1 The method of obtaining the test sample from the sample sent to the laboratory will depend upon the type of bituminous material under examination. NOTE 2 After either method of sample preparation, the material is then in a suitable condition for weighing into th

44、e crucible. 7 Procedure 7.1 Heat the crucible in the furnace at (650 50) C for at least 10 min. Place the crucible in the desiccator (or other suitable container) and allow to cool to room temperature. Weigh the crucible to the nearest 0,005 g as m1. 7.2 Place in the crucible sufficient sample, prep

45、ared in accordance to Clause 6, to yield a mass of ash of not less than 0,10 g and not more than 0,35 g. Weigh the crucible and sample to the nearest 0,005 g as m2. 7.3 Heat the crucible gently using a low flame of the bunsen burner until fumes cease to be evolved. Then heat the crucible and content

46、s in the furnace to (650 50) C until no more carbon is visible in the sample and the weight of the sample is constant. Place the crucible and contents in the desiccator (or other suitable container) and allow to cool to room temperature. Weigh the crucible and contents to the nearest 0,005 g. 7.4 Re

47、heat the crucible and contents in the furnace to (650 50) C for (25 5) min. Place the crucible and contents in the desiccator (or other suitable container) and allow it to cool to room temperature. Weigh the crucible and contents to the nearest 0,005 g. 7.5 Repeat 7.4 until constant mass is achieved as demonstrated by consecutive weightings differing by not more than 0,005 g. Define this reading as m3. 8 Calculation Calculate the mass of ash as a proportion by mass of the original sample as follows: 1001001213=mmmmBAAsh (1) where Ash is the proportion of ash by mass in percen