1、June 2011 Translation by DIN-Sprachendienst.English price group 26No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 6
2、5.060.50!$s9c“1802264www.din.deDDIN EN 12733Agricultural and forestry machinery Pedestrian controlled motor mowers Safety (includes Amendment A1:2009)English translation of DIN EN 12733:2011-06Land- und forstwirtschaftliche Maschinen Handgefhrte Motormher Sicherheit (enthlt nderung A1:2009)Englische
3、 bersetzung von DIN EN 12733:2011-06Matriel agricole et forestier Motofaucheuses conducteur pied Scurit (Amendement A1:2009 inclus)Traduction anglaise de DIN EN 12733:2011-06SupersedesDIN EN 12733:2009-07www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be cons
4、idered authoritative.7606.11 DIN EN 12733:2011-06 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 1 July 2009. DIN EN 12733:2001-09 may be used in parallel until 28 December 2009. National foreword This standard includes safety requirements.
5、 This standard has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section La
6、ndtechnik. Amendment of the European Machinery Directive has made it necessary to review the previously valid standard, EN 12733:2001, in terms of the essential requirements of the new European Machinery Directive, 2006/42/EC. This standard contains specifications meeting the essential requirements
7、set out in Annex I of the “Machinery Directive”, Directive 98/37/EC (valid until 28 December 2009), and the “revised Machinery Directive”, Directive 2006/42/EC, which takes effect on 29 December 2009, and which apply to pedestrian controlled motor mowers that are either first placed on the market or
8、 commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may
9、assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. For the International Standards which have not been publ
10、ished as DIN ISO Standards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 12733:2001-09 as follows: a) Annex ZA (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been
11、updated; b) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Compared with DIN EN 12733:2009-07 the following correction has been made to the German version only, the English text is therefore not affect
12、ed: a) in Annex I, Subclause I.3, first paragraph, it shall read “(150 5) mm” (instead of “ca. 150 mm”). Previous editions DIN EN 12733: 2001-09, 2009-07 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12733:2001+A1 March 2009 ICS 65.060.50 Supersedes EN 12733:2001English Version Agricultural a
13、nd forestry machinery - Pedestrian controlled motor mowers - Safety Matriel agricole et forestier - Motofaucheuses conducteur pied - Scurit Land- und forstwirtschaftliche Maschinen - Handgefhrte Motormher - Sicherheit This European Standard was approved by CEN on 21 January 2001 and includes Corrige
14、ndum 1 issued by CEN on 15 October 2003 and Amendment 1 approved by CEN on 29 December 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date
15、 lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the
16、 responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hunga
17、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre
18、: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12733:2001+A1:2009: EContents Foreword 4 Introduction . 5 1 Scope 5 2 Normative references 5 3 Terms and definitions . 7 4 List of hazards 8 5
19、 Safety requirements and/or measures 8 5.1 General 8 5.2 Engine starting and stopping devices . 8 5.3 Manual controls . 9 5.4 Marking of controls 10 5.5 Controls of the movement of the machine and of the blade(s) 10 5.6 Reverse gear 11 5.7 Handlebars . 11 5.8 Pressurized components 11 5.9 Liquid spi
20、llage 11 5.10 Exhaust system 11 5.11 Steering mechanism 14 5.12 Brakes . 16 5.13 Electrical installations . 17 5.14 Noise . 17 5.15 Vibration . 17 6 Specific requirements . 18 6.1 Sickle bar mowers . 18 6.2 Grassland mowers . 19 6.3 Flail mowers . 30 6.4 Scrub clearing machines 32 7 Information for
21、use 35 7.1 Instruction handbook 35 7.2 Marking . 36 Annex A (normative) List of hazards . 37 Annex B (normative) Noise test code for motor mowers - Engineering method (grade 2) . 42 B.0 Scope 42 B.1 A-weighted sound power level determination 42 B.2 A-weighted emission sound pressure level determinat
22、ion . 44 B.3 Requirements for test floor . 44 B.4 Installation, mounting and operating conditions . 44 B.5 Measurement uncertainties and declaration of noise emission values. 45 B.6 Information to be recorded and reported 45 Annex C (normative) Vibration measurement of motor mowers . 46 C.1 Quantiti
23、es to be measured 46 C.2 Instrumentation 46 C.3 Measurement direction and measurement location. 46 C.4 Test procedure . 47 C.5 Measurement procedure . 48 C.6 Determination of the measurement result 49 Annex D (normative) Foot probe test 50 D.1 Test equipment 50 D.2 Test method 50 D.3 Test acceptance
24、 . 50 Annex E (normative) Material of protective skirts . 52DIN EN 12733:2011-06 EN 12733:2001+A1:2009 (E) 2 PageE.1 Tearing resistance test 52 E.2 Perforation resistance test . 52 E.3 Wear resistance test 52 Annex F (normative) Corrugated fibreboard penetration tests on grassland mowers - Test encl
25、osure wall panels (see 6.2.2.2.4.2) 53 F.1 Purpose. 53 F.2 Test fixture . 53 F.3 Fibreboard samples . 53 F.4 Procedure . 53 F.5 Acceptance criteria 53 Annex G (normative) Target elevation areas 55 G.1 Lower elevation target. 55 G.2 Middle elevation target 55 G.3 Top elevation target . 55 G.4 Operato
26、r target area 55 Annex H (normative) Test enclosure 56 H.1 Base 56 H.2 Target composition . 56 Annex I (normative) Thrown object test for flail mower 59 I.1 Principle 59 I.2 Test installation . 59 I.3 Test procedure . 62 I.4 Test result . 63 I.5 Acceptance criteria 63 Annex J (normative) Thrown obje
27、ct test for scrub clearing machines . 64 J.1 Test equipment 64 J.2 Test method . 64 J.3 Data sheet - Thrown object test for scrub clearing machine 66 Annex K (informative) Example of a material and construction fulfilling the requirements for an artificial surface . 68 K.1 Material . 68 K.2 Construc
28、tion 68 Annex L (informative) Examples of machines 71 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by Directive 98/79/EC“ . 72 Annex ZB (informative) !Relationship between this European Standard and the Essential
29、 Requirements of EU Directive 2006/42/EC“ . 73 Bibliography 74 DIN EN 12733:2011-06 EN 12733:2001+A1:2009 (E) 3 Foreword This document (EN 12733:2001+A1:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry“, the secretariat of which is held b
30、y AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This European Standard was approved b
31、y CEN on 21 January 2001 and includes Corrigendum 1 issued by CEN on 15 October 2003 and Amendment 1 approved by CEN on 29 December 2008. This document supersedes EN 12733:2001. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. The modifications of
32、 the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags . This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU
33、 Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ Annexes A, B, C, D, E, F, G, H, I and J are normative. Annexes K and L are informative. According to the CEN/CENELEC Internal Regulations, the national standards orga
34、nizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R
35、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12733:2011-06 EN 12733:2001+A1:2009 (E) 4 Introduction The extent to which hazards are covered is indicated in the scope of this standard. 1 Scope This standard specifies safety requirements and their verification for
36、design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting blades used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation. For the purposes of this standard the following types of pedestrian cont
37、rolled machines are considered to be motor mowers: flail mowers; grassland mowers; scrub clearing machines; sickle bar mowers. This standard applies also to multipurpose machines when are used for cutting or mulching grass or scrub. This standard does not cover lawn mowers (see EN 836), engine drive
38、n brush cutters and grass trimmers (see EN ISO 11806) or other lawn maintenance equipment. This standard describes methods for the elimination or reduction of hazards arising from the use of motor mowers. Additionally, it specifies the type of information to be provided by the manufacturer on safe w
39、orking practices. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from oth
40、er publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or
41、 revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-1:1991, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology. EN 292-2:1991+A1:1995, Safety of machinery Basic concepts, gene
42、ral principles for design Part 2: Technical principles and specifications. EN 294:1992, Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs. EN 709:1997, Agricultural and forestry machinery Pedestrian controlled tractors with mounted rotary cultivators, moto
43、r hoes, motor hoes with drive wheel(s) Safety. EN 836:1997, Garden equipment Powered lawnmowers Safety. DIN EN 12733:2011-06 EN 12733:2001+A1:2009 (E) 5 CR 1030-1:1995:1995, Hand-arm vibration Guidelines for vibration hazards reduction Part 1: Engineering methods by design of machinery. EN 1033:1995
44、, Hand-arm vibration Laboratory measurement of vibration at the grip surface of hand-guided machinery General. EN ISO 354:1993, Acoustics Measurement of sound absorption in a reverberation room (ISO 354:1985). EN 60651:1994, Sound level meters (IEC 60651:1993). EN 60804:1994, Integrating-averaging s
45、ound level meters (IEC 60804:1985 and A1:1989). EN ISO 3744:1995, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994). ISO 3767-1:1991, Tractors, machinery for agriculture and fore
46、stry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols. ISO 3767-3:1995, Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 3: Symbols for powered lawn and
47、garden equipment. EN ISO 4871:1996, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996). EN ISO 11201:1995, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified
48、 positions Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995). EN ISO 11688-1:1998, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995). EN ISO 11688-2:2000, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design. ISO 2758:1983, Paper Determination of bursting strength. ISO 3789-
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1