1、January 2009DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 83.180; 91.100.10!$U=a“
2、1502662www.din.deDDIN EN 12808-2Grouts for tiles Part 2: Determination of resistance to abrasionEnglish version of DIN EN 12808-2:2009-01Klebstoffe und Fugenmrtel fr Fliesen und Platten Teil 2: Bestimmung der AbriebfestigkeitEnglische Fassung DIN EN 12808-2:2009-01SupersedesDIN EN 12808-2:2002-04www
3、.beuth.deDocument comprises 11 pagesDIN EN 12808-2:2009-01 2 National foreword This standard has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engi
4、neering Standards Committee), Technical Committee NA 005-09-82 AA Keramische Fliesen und Platten (Sp CEN/TC 67, ISO/TC 189). Amendments This standard differs from DIN EN 12808-2:2004-04 as follows: a) The standard has been revised in form and substance. Previous editions DIN EN 12808-2: 2004-04 EURO
5、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12808-2 October 2008 ICS 91.100.10 Supersedes EN 12808-2:2001 English Version Grouts for tiles - Part 2: Determination of resistance to abrasion Mortiers de joints pour carrelages - Partie 2: Dtermination de la rsistance labrasion Bestimmung der Abrie
6、bfestigkeit This European Standard was approved by CEN on 29 August 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogr
7、aphical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of
8、a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland
9、, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 3
10、6 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12808-2:2008: EKlebstoffe und Fugenmrtel fr Fliesen und Platten - Teil 2: EN 12808-2:2008 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Sam
11、pling.4 4 Test conditions 4 5 Test materials.4 6 Apparatus .4 7 Procedure .5 7.1 Mixing of grouts.5 7.2 Preparation of test specimens .5 7.3 Conditioning.5 7.4 Test procedure.5 8 Expression of results 6 9 Test report 6 Bibliography 9 DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 3 Foreword This documen
12、t (EN 12808-2:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and con
13、flicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This docum
14、ent supersedes EN 12808-2:2001. This document is one of a series of European Standards for ceramic tile adhesives including: EN 1308, Adhesives for tiles - Determination of slip EN 1323, Adhesives for tiles - Concrete slabs for tests EN 1324, Adhesives for tiles - Determination of shear adhesion str
15、ength of dispersion adhesives EN 1346, Adhesives for tiles - Determination of open time EN 1347, Adhesives for tiles - Determination of wetting capability EN 1348, Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles - Determinatio
16、n of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives EN 12004, Adhesives for tiles Requirements, evaluation of conformity, classification and designation EN 12808-1, Grouts for tiles Part
17、 1: Determination of chemical resistance of reaction resin mortars EN 12808-2, Grouts for tiles Part 2: Determination of resistance to abrasion EN 12808-3, Grouts for tiles Part 3: Determination of flexural and compressive strength EN 12808-4, Grouts for tiles Part 4: Determination of shrinkage EN 1
18、2808-5, Grouts for tiles Part 5: Determination of water absorption According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, F
19、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 4 1 Scope This European Standard
20、applies to all ceramic tile grouts used for internal and external tile installations on walls and floors. This European Standard specifies the test method to be used to determine the abrasion resistance of ceramic tile grouts. This European Standard does not contain performance requirements or recom
21、mendations for the design and installation of ceramic tiles. NOTE Ceramic tile grouts may also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones. 2 Normative references The following referenced documents are indispensable for the
22、 application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1:2005, Methods of testing cement Part 1: Determination of strength EN 1067, Adhesives - Examination a
23、nd preparation of samples for testing EN ISO 10545-6, Ceramic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:1995) EN ISO 15605, Adhesives Sampling (ISO 15605:2000) 3 Sampling Take a sample of at least 2 kg of the product to be tested in accordance with EN
24、 ISO 15605 and EN 1067. 4 Test conditions Standard conditions shall be (23 2) C and (50 5) % R.H. and a speed of air in the working area less than 0,2 m/s. 5 Test materials Condition all test materials for at least 24 h under standard conditions. 6 Apparatus 6.1 Abrasion apparatus consisting essenti
25、ally of a rotating disk, a storage hopper, a test specimen support and a counterweight in accordance with EN ISO 10545-6 (see Figure 1). 6.2 Abrasive material white fused aluminium oxide of grain size 80 (see EN ISO 10545-6). DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 5 6.3 Measuring gauge capable o
26、f measuring to 0,1 mm (see EN ISO 10545-6). 6.4 Template: a smooth, square, rigid, non absorbent frame (e.g. in polyethylene or PTFE), with internal dimensions of (100 1) mm x (100 1) mm and thickness of (10 1) mm. 7 Procedure 7.1 Mixing of grouts The amount of water and/or liquid admix required for
27、 preparing the cementitious grout shall be as stated by the manufacturer in parts by weight, i.e. liquid to dry powder. Prepare at least 2 kg of the grout in a mixer of the type described in Clause 4.4 of EN 196-1:2005, using the slow speed settings, (140 5) r/min rotation and (62 5) r/min planetary
28、 movement. Carry out the following procedure: pour the liquid into the pan; scatter the dry powder over the liquid; mix for 30 s; take out the mixing paddle; scrape down the paddle and pan within 1 min; replace the paddle and mix for 1 min. Let the grout mature as specified in the manufacturers inst
29、ructions, and then mix for a further 15 s. In the case of reaction resin grouts follow the manufacturers instructions. 7.2 Preparation of test specimens Place the template over a polyethylene film. Trowel a sufficient quantity of grout across the template and then screed clean so as to fill neatly a
30、nd completely the hole in the template. Cover with a glass plate according to EN 196-1. After 24 h remove the template carefully. Condition the units according to the test requirements. Prepare two specimens for each grout sample. 7.3 Conditioning The test units are conditioned for 27 days in standa
31、rd conditions: (23 2) C and (50 5) % R.H. 7.4 Test procedure Place a test specimen in the apparatus, with the trowelled face against the wheel, so that it is tangential against the rotating disc. Ensure that the feed of abrasive material into the grinding zone is uniform at a rate of (200 10) g per
32、100 revolutions. DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 6 Rotate the steel disc for 50 revolutions. Remove the test sample from the apparatus and measure the chord length of the groove by means of the measuring gauge to the nearest 0,5 mm. Test each sample in at least two places on its trowelled
33、 surface. 8 Expression of results The resistance to abrasion is expressed as the volume V of material removed, in cubic millimetres. This is calculated from the chord length of the groove by means of the expression: 8sin1802dhV= where sin ( / 2) = L / d; d is the diameter of the rotating disc (in mm
34、); h is the thickness of the rotating disc (in mm); is the angle (in degrees) subtended at the centre of the rotating disc by the chord (see Figure 2); L is the length of the chord (in mm). Some equivalent values are given in Table 1. 9 Test report The test report shall provide the following informa
35、tion: a) number, title and issue of this European Standard; b) place and date of sampling; c) type of grout, commercial designation and manufacturer name; d) identification of the test sample; e) handling and storage of samples before testing; f) test conditions; g) date of testing; h) amount of wat
36、er or liquid used for preparing the grout; i) test results (volume V for each individual groove and the mean value, in cubic millimetres); j) any other factor that could have influenced the result. DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 7 54378216Key 1 Test specimen clamp 2 Fixing screw 3 Test s
37、pecimen 4 Valve 5 Storage hopper for abrasive material 6 Even-flow tunnel 7 Steel disc 8 Counterweight Figure 1 Abrasion apparatus DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 8 LFigure 2 Definition of chord Table 1 Equivalent values L mm V mm3L mm V mm3L mm V mm3L mm V mm3L mm V mm320,0 20,5 21,0 21,
38、5 22,0 22,5 23,0 23,5 24,0 24,5 25,0 25,5 26,0 26,5 27,0 27,5 28,0 28,5 29,0 29,5 67 72 77 83 89 95 102 109 116 123 131 139 147 156 165 174 184 194 205 215 30,0 30,5 31,0 31,5 32,0 32,5 33,0 33,5 34,0 34,5 35,0 35,5 36,0 36,5 37,0 37,5 38,0 38,5 39,0 39,5 227 238 250 262 275 288 302 316 330 345 361
39、376 393 409 427 444 462 481 500 520 40,0 40,5 41,0 41,5 42,0 42,5 43,0 43,5 44,0 44,5 45,0 45,5 46,0 46,5 47,0 47,5 48,0 48,5 49,0 49,5 540 561 582 603 626 649 672 696 720 746 771 798 824 852 880 909 938 968 999 1 030 50,0 50,5 51,0 51,5 52,0 52,5 53,0 53,5 54,0 54,5 55,0 55,5 56,0 56,5 57,0 57,5 58
40、,0 58,5 59,0 59,5 1 062 1 094 1 128 1 162 1 196 1 232 1 268 1 305 1 342 1 380 1 419 1 459 1 499 1 541 1 583 1 625 1 669 1 713 1 758 1 804 60,0 60,5 61,0 61,5 62,0 62,5 63,0 63,5 64,0 64,5 65,0 65,5 66,0 66,5 67,0 67,5 68,0 68,5 69,0 69,5 1 851 1 899 1 947 1 996 2 046 2 097 2 149 2 202 2 256 2 310 2 365 2 422 2 479 2 537 2 596 2 656 2 717 2 779 2 842 2 906 DIN EN 12808-2:2009-01 EN 12808-2:2008 (E) 9 Bibliography 1 EN 13888, Grouts for tiles - Definitions and specifications DIN EN 12808-2:2009-01
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1