DIN EN 12881-2-2009 Conveyor belts - Fire simulation flammability testing - Part 2 Large scale fire test(includes Amendment A1 2008) English version of DIN EN 12881-2 2009-10《传送带 失.pdf

1、October 2009DEUTSCHE NORM English price group 8No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.220.40; 53.040.20!$Z

2、?Q“1552846www.din.deDDIN EN 12881-2Conveyor belts Fire simulation flammability testing Part 2: Large scale fire test (includes Amendment A1:200 )English version of DIN EN 12881-2:2009-10Frdergurte Brandtechnische Prfungen Teil 2: Brandstreckenprfung (enthlt nderung A1:200 )Englische Fassung DIN EN 1

3、2881-2:2009-10SupersedesDIN EN 12881-2:2005-11See start of validitywww.beuth.deDocument comprises pages1288DIN EN 12881-2:2009-10 National foreword This document has been prepared by Technical Committee CEN/TC 188 “Conveyor belts” (Secretariat: BSI, United Kingdom). The responsible German body invol

4、ved in its preparation was the Normenausschuss Kautschuktechnik (Rubber Technology Standards Committee), Technical Committee NA 045-02-05 AA Frdergurte. Amendments This standard differs from DIN EN 12881-2:2005-11 as follows: a) Annex ZB (informative) “Relationship between this European Standard and

5、 the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous editions DIN EN 12881-2: 2005-11 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12881-2:2005+A1 April 2008 ICS 13.220.40; 53.040.20 Supersedes EN 12881-2:2005 English Version Conveyor belts Fire simulation fl

6、ammability testing Part 2: Large scale fire test Courroies transporteuses Essais de simulation dinflammation Partie 2: Essai au feu grande chelle Frdergurte Brandtechnische Prfungen Teil 2: Brandstreckenprfung This European Standard was approved by CEN on 21 March 2005 and includes Amendment 1 appro

7、ved by CEN on 21 February 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

8、 standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and noti

9、fied to the CEN Management Centre has the same status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

10、ta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exp

11、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12881-2:2005+A1:2008: EEN 12881-2:2005+A1:2008 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 5 3 Apparatus .5 4 Preparation .5 4.1 Test piece .5 4.2 Temperature before the

12、 test .5 4.3 Number of tests5 5 Procedure .6 6 Interpretation of results 6 7 Test report 6 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC 9 Annex ZB !Relationship between this European Standard and the Essential Requirements

13、 of EU Directive 2006/42/EC“.10 (informative)DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 3 Foreword This document (EN 12881-2:2005+A1:2008) has been prepared by Technical Committee CEN/TC 188 “Conveyor belts”, the secretariat of which is held by BSI. This European Standard shall be given the

14、status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at the latest by October 2008. This document supersedes EN 12881-2:2005. This document includes Amendment 1, approved by C

15、EN on 2008-02-21. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU D

16、irective(s). !For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document.“ The other part of EN 12281 is: !EN 12881-1+A1:2008“, Conveyor belts Fire simulation flammability testing Part 1: Propane burner tests According to the CEN/CENELEC Interna

17、l Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

18、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 4 Introduction The method of test described in this part of EN 12881 is intended to provide an indication of the reaction of a c

19、onveyor belt when exposed to a large fire. The fire being simulated is one not caused by a local heat source but by materials around the conveyor belt which catch fire following exposure to other heat sources. Attention is drawn to the fact that in assessing the overall flammability characteristics

20、of conveyor belting for specific installations, it is not sufficient to rely solely on any single method of test but consideration should also to be given to the individual site location. DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 5 1 Scope This part of EN 12881 describes a method of test fo

21、r the assessment of fire propagation along a conveyor belt when the belt is exposed to a heat source. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated reference

22、s, the latest edition of the referenced document (including any amendments) applies. EN 60584-1, Thermocouples - Part 1: Reference tables (IEC 60584-1:1995) ISO 3130, Wood Determination of moisture content for physical and mechanical tests 3 Apparatus 3.1 Fire gallery lined with fire clay bricks hav

23、ing a cross sectional area of 8 m2and a length of at least 70 m . The fuel in the fire object area shall be supported by four steel arches 1 m apart (see Figures 1a) and 1b). 3.2 Trestle for positioning the conveyor belt in the fire gallery during the test. The trestle shall be 18 m long and 1,2 m w

24、ide having idlers with a pitch of 1,5 m and a troughing angle of 30. 3.3 Fire object comprising a) 260 kg of air-dried coniferous wood in the form of round timber, having a diameter of 8 cm to 12 cm and a length of 1,25 m, cut in the longitudinal direction and having moisture content of (10 2) % mea

25、sured as described in ISO 3130; and b) 40 kg of smaller wood pieces and wood shavings for ignition (see Figures 1a) and 1b). 3.4 Anemometer for measuring the air speed in the fire gallery positioned 10 m in front of the test piece in the direction of the air flow. 3.5 Row of thermocouples, Type K (N

26、i-Cr/Ni) according to EN 60584-1, positioned in the longitudinal direction above the test piece, a distance of approximately 3 m from each other and 100 mm under the roof of the fire gallery (see Figures 1a) and 1b). 4 Preparation 4.1 Test piece The test piece shall be cut 18 m long at full belt wid

27、th. 4.2 Temperature before the test The ambient temperature shall be between 5 C and 30 C before the test. 4.3 Number of tests One test shall be carried out. DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 6 5 Procedure WARNING The tests described in this part of EN 12881 can generate large amoun

28、ts of smoke and heat. It is therefore essential to conduct the tests with caution, having due regard to health and safety considerations and to terminate any test immediately if at any time it is considered advisable to do so. In this regard it is recommended that no test should be supervised by onl

29、y one person. Install the trestle (3.2) centrally along the longitudinal axis of the fire gallery (3.1) at a distance of 25 m from the beginning of the gallery in the direction of the air flow (see Figure 1a). Place the half round timber between the gallery wall and the steel arch supports equally d

30、istributed over the three spaces. In the first two spaces place the 40 kg of wood for ignition on the ground near the wall. Lay the test piece centrally in the longitudinal direction on the trestle with the bottom cover down such that a 13 m length of the test piece is behind the fire object (3.3) i

31、n the direction of the air flow (see Figure 1a). Fix both ends of the test piece in this position, ensuring that the distance from the lowest point of the test piece to the roof of the gallery is 1,5 m (see Figure 1a). Position the thermocouples (3.5) in accordance with Figures 1a) and 1b). Before s

32、tarting the test, adjust the air flow on the fresh air side to 1,2 m/s. Set the wood on both sides of the gallery on fire and observe the extent of the fire. Measure and record continuously the temperature at the test piece and under the roof, the composition of the gas and the speed of the air flow

33、. 6 Interpretation of results At the end of the test measure the fire propagation at the test piece from the end of the fire object in the direction of the air flow. The test piece shall have passed the test if the fire has not propagated more than 10 m behind the fire object (see Figure 1a). 7 Test

34、 report The test report shall include the following particulars: a) reference to this European Standard, i.e. !EN 12881-2:2005+A1:2008“; b) name of institution carrying out the test; c) name of belt manufacturer; d) description of the conveyor belt, taken from the product standard or specification;

35、e) distance that the fire has propagated (see Clause 6); f) date of the test; g) signature and name of person responsible for the test; h) any deviation from this standard; i) the following statement: “The test results relate only to the behaviour of the test pieces of a product under the particular

36、 conditions of test; they are not intended to be the sole criterion for assessing the potential fire hazard of the product in use“. DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 7 Dimensions in metres Tolerances 0,05 m a) Position of the test piece and fire object DIN EN 12881-2:2009-10 EN 1288

37、1-2:2005+A1:2008 (E) 8 b) Fire gallery cross section Key1 Conveyor belt/test piece 2 Timber lining 3 Steel arch support 4 Suspension 5 Trestle 6 Small wood, wood shavings 7 Fire clay bricks 8 Fire object 9 Window 10 Fire gallery 11 Limit for fire propagation T Thermocouple Type K (Ni-Cr/Ni) accordin

38、g to EN 60584-1 Figure 1 Test arrangement DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 9 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the Europ

39、ean Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive for machinery, 98/37/EC, amended by Directive 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directi

40、ve and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirement 1.5.6 Fire of that Directive and

41、associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. DIN EN 12881-2:2009-10 EN 12881-2:2005+A1:2008 (E) 10 Annex ZB (informative) !Relationship between this European Standard and the Essential R

42、equirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive for machinery, 2006/42/EC. Once t

43、his standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with Essential Requirements 1.5.6 Fire of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.“ DIN EN 12881-2:2009-10