DIN EN 13035-11-2010 Machines and plants for the manufacture treatment and processing of flat glass - Safety requirements - Part 11 Drilling machines German version EN 13035-11 200.pdf

1、July 2010 Translation by DIN-Sprachendienst.English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 8

2、1.100!$is“1708061www.din.deDDIN EN 13035-11Machines and plants for the manufacture, treatment and processing offlat glass Safety requirements Part 11: Drilling machines (includes Amendment A1:2010)English translation of DIN EN 13035-11:2010-07Maschinen und Anlagen zur Herstellung, Be- und Verarbeitu

3、ng von Flachglas Sicherheitsanforderungen Teil 11: Bohrmaschinen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 13035-11:2010-07Machines et installations pour la production, le faonnage et la transformation du verreplat Exigences de scurit Partie 11: Machines de perage (Amendement A1:2010 i

4、nclus)Traduction anglaise de DIN EN 13035-11:2010-07SupersedesDIN EN 13035-11:2006-11www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 23 pages07.10 DIN EN 13035-11:2010-07 2 A comma is used as the decimal marker. Start of validity This s

5、tandard takes effect on 1 July 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” (Secretariat: DIN, Germany). The responsible German body involved in its

6、 preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-13-13 AA Glasmaschinen of Section Bau- und Baustoffmaschinen. Representatives of manufacturers and users of glass machines, and of the employers liability insurance associations c

7、ontributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, (valid until 28 December 2009) and the “revised Machinery Directive”, Directive 2006/42/EC, which took effect on 29 December 2009

8、, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a

9、 “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. DIN shall

10、 not be held responsible for identifying any or all such patent rights. The European Standards referred to in clause 2 and in the bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 1

11、3035-11:2006-11 as follows: a) Foreword and Scope of the standard have been updated. b) Normative references have been updated. c) Clause 4, Table 1, has been updated. d) Clause 5.1 has been amended. e) Subclause 5.4 has been amended. f) Subclause 5.5.1 has been updated/amended. g) Subclauses 5.6, f

12、irst paragraph, has been updated. DIN EN 13035-11:2010-07 3 h) Subclause 5.7.4.2 has been updated/amended. i) Subclauses 5.7.5 and 5.7.6 have been updated/amended. j) Subclause 5.8 has been updated. k) Subclause 5.9, second paragraph, has been updated. l) Subclause 5.10.2 has been amended and subcla

13、use 5.10.3 has been added. m) Subclause 7.2.2 has been amended. n) Subclauses 7.3.2.1, first and second sentence, and subclause 7.3.2.3 have been amended. o) Subclauses 7.3.9 and 7.3.10 have been added. p) Subclause 7.4 has been updated/amended. q) A normative Annex B has been added. r) Annex ZA (in

14、formative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been updated. s) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. t) The bibliography

15、has been updated. Previous editions DIN EN 13035-11: 2006-11 DIN EN 13035-11:2010-07 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13035-11:2006+A1 March 2010 ICS 81.100 Supersedes EN 13035-11:2006English Version Machines and plants for the manufacture, trea

16、tment and processing of flat glass - Safety requirements - Part 11: Drilling machines Machines et installations pour la production, le faonnage et la transformation du verre plat - Exigences de scurit - Partie 11: Machines de perage Maschinen und Anlagen zur Herstellung, Be- und Verarbeitung von Fla

17、chglas - Sicherheitsanforderungen - Teil 11: Bohrmaschinen This European Standard was approved by CEN on 24 May 2006 and includes Amendment 1 approved by CEN on 24 January 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this E

18、uropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (En

19、glish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgar

20、ia, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR S

21、TANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13035-11:2006+A1:2010: EEN 13035-11:2006+A1:2010

22、 (E) 2 Contents Page Foreword 3Introduction .41 Scope 52 Normative references 53 Terms and definitions .64 List of significant hazards 75 Safety requirements and/or protective measures 86 Verification of safety requirements and/or protective measures 117 Information for use . 11! “Requirements of EU

23、 Directive 98/37/EC . 17!Requirements of EU Directive 2006/42/EC“ 18Bibliography . 19Tables !Table 1 List of significant hazards . 8Annex ZA (informative) Relationship between this European Standard and the Essential Annex ZB (informative) Relationship between this European Standard and the Essentia

24、l Annex A (informative) Example of a movable interlocking guard for a drilling machine . 14Annex B (normative) Noise-test code . 15DIN EN 13035-11:2010-07 EN 13035-11:2006+A1:2010 (E) 3 Foreword This document (EN 13035-11:2006+A1:2010) has been prepared by Technical Committee CEN/TC 151 “Constructio

25、n equipment and building material machines Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shal

26、l be with-drawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, a

27、pproved by CEN on 2010-01-24. This document supersedes EN 13035-11:2006. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Associati

28、on and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ It is one of a series concerning machinery for the treatment and processing of flat glass (see Bibliography). According to

29、 the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lat

30、via, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13035-11:2010-07 EN 13035-11:2006+A1:2010 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machi

31、nery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provi-sions of this type C standard take precedence

32、over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. DIN EN 13035-11:2010-07 EN 13035-11:2006+A1:2010 (E) 5 1 Scope 1.1 This European Standard contains the requirements for stationary machines for the drilling

33、 of flat glass, using a powered rotating tool. Stationary machines are classified into: a) manual; b) semi-automatic; c) automatic single-head or multi-head; d) fully automatic. 1.2 !This European Standard deals with the significant hazards, hazardous situations and events rele-vant to drilling mach

34、ines for flat glass when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).“ This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards during com

35、missioning, the operation and maintenance. !Safety requirements and/or protective measures are given in Clause 5. When references are made to B level standards such as EN 953, EN 983, EN 999, EN 1037, EN 1088, EN 60204-1, EN ISO 13850 and EN ISO 13857, the manufacturer should carry out an adequate r

36、isk assessment for the requirements thereof where choice is necessary.“ 1.3 This European Standard does not address the safety requirements for conveyor belts, rollers (see EN 619) or other means of transporting the glass to and from the drilling machine (see e.g. EN 13035-5). 1.4 This European Stan

37、dard is not applicable to drilling machines which are manufactured before the date of publication of this European Standard by CEN. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies.

38、 For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 983:1996, Safety of machinery Safety re

39、quirements for fluid power systems and their components Pneumatics !deleted text“ EN 1088:1995, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 60204-1:2006, Safety of machinery Electrical equipment of machines Part 1: General require-ments (IE

40、C 60204-1:2005, modified)“ EN 60825-1:1994, Safety of laser products Part 1: Equipment classification, requirements and users guide (IEC 60825-1:1993) DIN EN 13035-11:2010-07 EN 13035-11:2006+A1:2010 (E) 6 !EN 61310-1:2008, Safety of machinery Indication, marking and actuation Part 1: Requirements f

41、or visual, acoustic and tactile signals (IEC 61310-1:2007)“ !EN ISO 3744:2009“, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) !EN ISO 3746:2009, Acoustics Determination of so

42、und power levels of noise sources using sound pres-sure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)“ !EN ISO 3747:2009, Acoustics Determination of sound power levels of noise sources using sound pres-sure Comparison method for u

43、se in situ (ISO 3747:2000) EN ISO 4871:2009, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 11201:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other s

44、pecified positions Engineering method in an essen-tially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) EN ISO 11202:2009, Acoustics Noise emitted by machinery and equipment Measurement of emission sound pressure levels at a work station and at other specified positions Su

45、rvey method in situ (ISO 11202:1995)“ !EN ISO 11204:2009, Acoustics Noise emitted by machinery and equipment Measurement of emis-sion sound pressure levels at a work station and at other specified positions Method requiring environ-mental corrections (ISO 11204:1995, including Cor 1:1997)“ !EN ISO 1

46、1688-1:2009“, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1:1995) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003

47、, Safety of machinery Basic concepts, general principles for design Part 2: Tech-nical principles (ISO 12100-2:2003) !EN ISO 13849-1:2008, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13850:2008, Safety of machinery Emerg

48、ency stop Principles for design (ISO 13850:2006) EN ISO 13857:2008, Safety of machinery Safety distances to prevent hazard zones being reached by up-per and lower limbs (ISO 13857:2008)“ 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003

49、 and the following apply. 3.1 manual machine machine where the tool is applied to the workpiece by the direction of the operator DIN EN 13035-11:2010-07 EN 13035-11:2006+A1:2010 (E) 7 3.2 semi-automatic machine machine where the workpiece is loaded and unloaded by the operator and some of the intermediate machining operations are under the control and guidance of the operator. NOTE During the machining operations, the operator does n