DIN EN 13045-2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances English version of DIN EN 13045 2009-08《包装 挠性柱形塑料管 尺寸规格和公差 英文版本DIN EN 13045-2009-08》.pdf

1、August 2009DEUTSCHE NORM English price group 6No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 55.120!$Y6|“1541989www.d

2、in.deDDIN EN 13045Packaging Flexible cylindrical plastic tubes Dimensions and tolerancesEnglish version of DIN EN 13045:2009-08Packmittel Zylindrische Kunststofftuben Mae und GrenzabmaeEnglische Fassung DIN EN 13045:2009-08SupersedesDIN EN 13045:2000-10www.beuth.deDocument comprises 8 pagesDIN EN 13

3、045:2009-08 National foreword This standard has been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee NA 115-02-08

4、 AA Tuben. Amendments This standard differs from DIN EN 13045:2000-10 as follows: a) EN ISO 11683 has been deleted from clause 2 “Normative references”. b) Part of the definition of 3.2 “nominal length” is now given as a Note. c) Table 1 “Dimensions” has been revised. d) Clause 5 “Materials” has bee

5、n deleted. e) Clause 6 “Finishes” has been deleted. Previous editions DIN 5061-2: 1977-08, 1978-07, 1990-08 DIN EN 13045: 2000-10 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13045 April 2009 ICS 55.120 Supersedes EN 13045:2000 English Version Packaging Flexible cylindrical plastic tubes D

6、imensions and tolerances Emballage Tubes souples cylindriques plastiques Dimensions et tolrances Packmittel Zylindrische Kunststofftuben Mae und Grenzabmae This European Standard was approved by CEN on 19 March 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which sti

7、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standar

8、d exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions. CEN members are the national standar

9、ds bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdo

10、m. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13045:2009: EEN 13045

11、:2009 (E) 2 Contents PageForeword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions 4 4 Dimensions . 5 DIN EN 13045:2009-08 EN 13045:2009 (E) 3 Foreword This document (EN 13045:2009) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by

12、 AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility tha

13、t some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13045:2000. It is based on the professional recommendations of the European Tube Manufacturers Asso

14、ciation (ETMA). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

15、Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 13045:2009-08 EN 13045:2009 (E) 4 1 Scope This standard specifies the diameter, length, wall thickness and shoulder geom

16、etry of cylindrical plastic flexible tubes. It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer

17、ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12374, Packaging - Flexible tubes Terminology 3 Terms and definitions For the purposes of this standard, the terms and definitions in EN 12374 and the f

18、ollowing apply: 3.1 nominal diameter, D diameter d1of the tube measured at the shoulder 3.2 nominal length, L measured distance between the shoulder and the open end of the tube NOTE Length l1shown in Figure 1. 3.3 thickness of the sleeve, S1thickness of the body wall of the tube DIN EN 13045:2009-0

19、8 EN 13045:2009 (E) 5 Key 1 Shoulder 2 Nozzle 3 Orifice 4 Body (Tube sleeve) 5 Measurement point for the length of the tube body Figure 1 Cylindrical plastic tube 4 Dimensions All tube dimensions shall be in accordance with Table 1: DIN EN 13045:2009-08 EN 13045:2009 (E) 6 Table 1 Dimensions (measur

20、ements in mm) Nominal Diameter d1 l1(1) S1 D Diameter Tolerance 100 1mm 1001% Thickness Tolerance 13,5 13,5 0,4 40 to 70 0,4 +0,02 -0,04 16 16 55 to 80 19 19 55 to 90 22 22 + 0,3 -0,4 65 to 120 25 25 70 to 135 0,4 to 0,5 + 0,02 -0,05 30 30 70 to 150 35 35 80 to 165 40 40 + 0,1 -0,5 90 to 180 0,5 + 0

21、,02 -0,06 45 45 110 to 175 50 50 120 to 200 0,5 to 0,6 56 56 125 to 200 +0,0 -0,1 60 60 165 to 240 +0,02 -0,05 (1) The figures below represent the range of tube lengths that can be produced for each tube diameter. These measures and tolerances are valid for standard materials like PE-HD, PE-MD, PE-LD and PE-LLD. Other materials may be subject to a mutual agreement between customer and supplier. DIN EN 13045:2009-08