1、January 2010DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.340.50!$Wu“1565282w
2、ww.din.deDDIN EN 13061Protective clothing Shin guards for association football players Requirements and test methodsEnglish version of DIN EN 13061:2010-01Schutzkleidung Schienbeinschtzer fr Fuballspieler Anforderungen und PrfverfahrenEnglische Fassung DIN EN 13061:2010-01SupersedesDIN EN 13061:2002
3、-03www.beuth.deDocument comprises pages29DIN EN 13061:2010-01 National foreword This standard has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” (Secretariat: DIN, Germany). The responsible German body involved in its preparati
4、on was the Normenausschuss Sport- und Freizeitgert (Sports Equipment Standards Committee), Working Committee NA 112-04-03 AA Krperschutz. Amendments This standard differs from DIN EN 13061:2002-03 as follows: a) All figures have been listed in the table of contents. b) The requirements for innocuous
5、ness have been reworded (4.4). c) Clause 4 “Test methods” has been restructured. d) The test methods for general requirements have been extended (4.1). e) Sampling and conditioning have been merged in one clause (4.2). f) The test methods for innocuousness of edges, seams and buckles as well as inte
6、rnal ridges and external ridges have been addressed in detail (4.4). g) Pass and fail conditions for testing external ridges have been supplemented (4.4.3.2). Previous editions DIN EN 13061: 2002-03 2 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13061September 2009ICS 13.340.50 Supersedes EN 13
7、061:2001 English VersionProtective clothing - Shin guards for association football players - Requirements and test methodsVtements de protection - Protge-tibias pour joueurs defootball - Exigences et mthodes dessaiSchutzkleidung - Schienbeinschtzer fr Fuballspieler -Anforderungen und PrfverfahrenThi
8、s European Standard was approved by CEN on 8 August 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
9、 concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its
10、 own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua
11、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All
12、 rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13061:2009: EEN 13061:2009 (E) 2 Content Page Foreword 4Introduction . 51 Scope 62 Terms and definitions . 63 Requirements . 63.1 General, including innocuousness 63.2 Ergonomics 73.3 Sizing 7
13、3.4 Restraint . 73.5 Stud impact resistance . 73.6 Blunt impact performance 74 Test methods 74.1 General 74.2 Sampling and conditioning of the test samples . 84.3 Test area marking 84.4 Innocuousness . 94.5 Ergonomics 124.6 Restraint . 124.7 Stud impact 134.8 Blunt impact test 185 Marking . 236 Info
14、rmation supplied by the manufacturer . 24Annex A (informative) Significant technical changes between this European Standard and the previous edition EN 13061:2001 . 25Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC . 26Bibl
15、iography 27Figures Figure 1 A plan diagram of the test area of a shin guard 8 Figure 2 Radius gauge for assessing external ridges 8 Figure 3 Diagram of the use of radius gauges on external ridges of a shin guard . 10 Figure 4 The points of attachment of clamps and the direction of the force to be ap
16、plied in restraint testing . 11 Figure 5 Diagram illustrating the principles of the design of a horizontal cone stud impact apparatus 13 Figure 6 Diagram illustrating the construction tolerances on the guidance and falling block system 14 Figure 7 Diagram illustrating the principles of the design of
17、 the vertical inclined cone stud impact apparatus 16 Figure 8 Dimensions of the leg form cone 20 DIN EN 13061:2010-01 EN 13061:2009 (E) 3 Figure 9 Diagram of the vertical impact anvil design . 21 Figure 10 View of the falling mass . 21 Figure 11 Plan view of the strap system to hold the shin guard i
18、n place on the leg form . 22 Figure 12 A shin guard held down by a strap system on the leg form cone . 23 DIN EN 13061:2010-01 EN 13061:2009 (E) 4 Foreword This document (EN 13061:2009) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lif
19、ejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. A
20、ttention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13061:2001. This document has been prepared under a mandate
21、 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive 89/686/EEC, see informative Annex ZA, which is an integral part of this document. Annex A provides details of significa
22、nt technical changes between this European Standard and the previous edition EN 13061:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repu
23、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 13061:2010-01 EN 13061:2009 (E) 5 Introducti
24、on Association football by virtue of being a body contact sport presents a number of hazards which can cause injuries. Shin guards cannot always prevent serious injuries but are intended to significantly reduce the severity of laceration, contusion and puncture caused by impacts. Shin guards intende
25、d for protection in association football can be used in other sports where appropriate, and where the rules of the sport permit. However, the protection provided in such other sports cannot be claimed to be adequate on the basis of conformance to this European Standard without supporting information
26、 concerning the sport in which the shin guards are to be used. DIN EN 13061:2010-01 EN 13061:2009 (E) 6 1 Scope This European Standard specifies the general requirements for the ergonomics, innocuousness, sizing, coverage, performance, and cleaning of association football players shin guards. Test m
27、ethods are described and performance levels are defined. Requirements for the marking of shin guards and the information to be supplied with them are given. 2 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 2.1 contusion or bruise injury u
28、sually caused by a blunt impact in which the skin is not broken. Underlying soft tissue is damaged by compression and by shearing forces. Fine blood vessels are damaged leading to bleeding, discoloration and swelling 2.2 laceration irregular torn injury through the skin 2.3 puncture wound in which a
29、 penetrating object makes a discrete hole through the skin which more or less closes after withdrawal of the object 2.4 association football game of football in which the ball is not picked up or carried by field players, and in which the rules for tackling should limit the severity of body blows 2.
30、5 internal ridges raised area of the shell material which is directed towards the users leg. A ridge is a linear feature that has a top width of less than 5 mm or an area feature with a top area of less than 25 mm23 Requirements 3.1 General, including innocuousness Shin guards for association footba
31、ll players shall meet a general requirement that they are safe to use and fit for their purpose, and the following specific requirements: Construction materials or their derivates shall not harm those coming into contact with them. NOTE Information on the identification and classification of such su
32、bstances can be found in the Directive 67/548/EEC (classification, packaging and labelling of dangerous substances) 1 as well as in the Regulation (EC) no.1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restrictio
33、n of Chemicals (REACH) 2. The manufacturer shall list in the information supplied by the manufacturer the substances used for the main components of the product. DIN EN 13061:2010-01 EN 13061:2009 (E) 7 There shall not be such hard or sharp edges, seams, buckles or other items on the surfaces of the
34、 product that can harm the user or other players during normal use, when tested according to 4.4.1. If there are ridges that can be felt with the fingers on the inside of the shin guard, they shall be tested according to 4.4.2. If there are ridges higher than 1 mm on the outer surface of the shin gu
35、ard, they shall be tested according to 4.4.3. The shin guard does only perform this requirement, if the end points of the arc of the appropriate gauge touch the surface of the shin guard at all positions tested as described in 4.4.3.2 and in all orientations of the gauge. 3.2 Ergonomics Shin guards
36、for association football players shall be so designed that in the foreseeable conditions of use for which they are intended the user can perform the typical playing movements, e.g. running, jumping, flexing the foot, without being hindered. If restriction or severe discomfort is reported, the produc
37、t fails. Test method, see 4.5. 3.3 Sizing Shin guards for association football players shall be marked with their size. The size marking shall be the range of body height of players that the shin guard is designed to fit. 3.4 Restraint Shin guards for association football players shall be designed s
38、o that they should remain in place during normal play and during impacts. The restraint system recommended by the manufacturer or his authorised representative established in the community shall be tested in accordance with 4.6. On release of the force, the displacement of the shin guard from its in
39、itial position shall be less than 15 mm or less than 15 % of the linear dimension of the test area measured in line with the force applied, if this is greater than 15 mm. 3.5 Stud impact resistance Shin guards for association football players shall resist impacts by a metal stud 10 mm in diameter wh
40、en tested according to 4.7.1 and 4.7.2. The inner surface of the shin guards tested shall not be pervasively torn or being perforated. No hard material shall shatter or give rise to potentially injurious fragments. When tested according to 4.7.2, the stud shall be stopped less than 25 mm below the z
41、ero line. 3.6 Blunt impact performance When tested according to 4.8, the transmitted force of the three single impacts to the same point on three shin guards shall not exceed 2,0 kN in the central or lateral test areas. 4 Test methods 4.1 General Confirm by reference to appropriate documentation, e.
42、g. document of compliance, test reports, and by measurement, visual inspection and tactile examination of the shin guard, that it meets the requirements of 3.1. Measuring instruments unless otherwise specified shall be accurate to 2 % of the pass/fail level of the characteristic being measured. For
43、each of the required sequences of measurements performed in accordance with this standard, a corresponding estimate of the uncertainty of the final result shall be determined. The uncertainty of DIN EN 13061:2010-01 EN 13061:2009 (E) 8 measurement shall be expressed in the form X. It shall be used i
44、n determining whether a “Pass“ performance has been achieved. If the final result minus X is below the pass level when the requirement that a certain value shall be exceeded, the sample shall be deemed to have failed. NOTE It is anticipated that values of uncertainty of measurement will be usually b
45、etween 2 % and 5 % of the measured value for force and length measurements. 4.2 Sampling and conditioning of the test samples Sufficient pairs of new, unused shin guards shall be supplied to execute all the tests required by this Standard. At least one sample of each size to be placed on the market
46、shall be included, complete with the labels and information supplied by the manufacturer that will be supplied with the product. The construction of all sizes shall be checked to ensure that they are identical apart from areal dimensions, and that these are in the proportion to the sizes marked on t
47、he shin guards. If the construction of all sizes is identical, at least two sizes shall be subjected to mechanical testing. If differences in construction are apparent, all sizes shall be tested. If a specific test cannot be executed because integrated straps, socks or accessories interfere with the
48、 testing procedure, these straps, socks or accessories shall be cut off. However, no parts of the test area shall be cut off. Before testing all shin guards shall be cleaned five times according to the manufacturers instructions in the information supplied by the manufacturer. Test specimens shall b
49、e conditioned at a temperature of (20 2) C and at a relative humidity of (65 5) % for at least 48 h before testing and the tests shall be carried out in the same environment or within 10 min of removal from that environment. 4.3 Test area marking The total test area is formed by a central test area and a lateral test area. The lateral test area is a border area of 15 mm constant width surrounding the central test area. The total tes
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1