DIN EN 13084-1-2007 Free-standing chimneys - Part 1 General requirements English version of DIN EN 13084-1 2007-05《独立式烟囱 第1部分 一般要求》.pdf

1、May 2007DEUTSCHE NORM English price group 15No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.060.40!,xPo“9854576www.

2、din.deDDIN EN 13084-1Free-standing chimneys Part 1: General requirementsEnglish version of DIN EN 13084-1:2007-05Freistehende Schornsteine Teil 1: Allgemeine AnforderungenEnglische Fassung DIN EN 13084-1:2007-05SupersedesDIN EN 13084-1:2001-04 andwww.beuth.deDocument comprises 41 pages DIN EN 13084-

3、1 Corrigendum 1:2006-0608.07DIN EN 13084-1:2007-05 2 National foreword This standard has been prepared by CEN/TC 297 “Free-standing industrial chimneys”, the Secretariat of which is held by DIN (Germany). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Build

4、ing and Civil Engineering Standards Committee), Technical Committee NA 005-11-37 AA Industrieschornsteine. Amendments This standard differs from DIN EN 13084-1:2001-04 and DIN EN 13084-1 Corrigendum 1:2006-06 as follows: a) The specifications have been harmonized with those given in the relevant Eur

5、ocodes. Previous editions DIN 1056: 1927-04, 1929-08, 1984-10 DIN 1056-1: 1940-08, 1959-04, 1969-08 DIN 1056-2: 1940-08, 1959-04, 1969-08 DIN 1058: 1929-04, 1959-07, 1969-08 DIN 4133: 1973-08, 1991-11 DIN EN 13084-1: 2001-04 DIN EN 13084-1 Corrigendum 1: 2006-06 EUROPEAN STANDARDNORME EUROPENNEEUROP

6、ISCHE NORMEN 13084-1February 2007ICS 91.060.40 Supersedes EN 13084-1:2000 English VersionFree-standing chimneys - Part 1: General requirementsFreistehende Schornsteine - Teil 1: AllgemeineAnforderungenThis European Standard was approved by CEN on 23 December 2006.CEN members are bound to comply with

7、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centr

8、e or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial ve

9、rsions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Sp

10、ain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Mem

11、bers.Ref. No. EN 13084-1:2007: EChemines autoportantes - Partie 1: Exigences gnralesEN 13084-1:2007 (E) 2 Contents Page Foreword4 1 Scope 5 2 Normative references 5 3 Terms and definitions .6 4 Performance requirements; general design .8 4.1 Materials .8 4.2 Flue gas considerations8 4.2.1 General8 4

12、.2.2 Design parameters.8 4.2.3 Heat flow calculations .9 4.2.4 Flow calculations.11 4.2.5 Chemical attack11 4.3 Environmental aspects .13 4.3.1 Noise .13 4.3.2 Temperature .13 4.3.3 Protection against falling ice14 4.3.4 Gas tightness .14 4.4 Insulation 14 4.5 Ventilation.15 4.6 Protective coatings1

13、5 4.7 Foundation .15 4.8 Accessories15 4.8.1 Access 15 4.8.2 Lightning protection16 4.8.3 Aircraft warning system16 4.8.4 Additional accessories17 5 Performance requirements: Structural design .17 5.1 Basic design principles.17 5.2 Actions18 5.2.1 General18 5.2.2 Permanent actions.18 5.2.3 Variable

14、actions .18 5.2.4 Accidental actions .20 5.3 Imperfections .21 5.4 Foundation .21 5.5 Liner 21 6 Site activities21 7 Inspection and maintenance 22 8 Instrumentation22 Annex A (normative) Gas flow calculation23 A.1 Principal features of the method of calculation .23 A.2 Parameters related to construc

15、tion type 23 A.2.1 Roughness .23 A.2.2 Thermal resistance 23 A.3 Basic values for the calculation.24 EN 13084-1:2007 (E) 3 A.3.1 Air temperature24 A.3.2 Outside air pressure24 A.3.3 Flue gas 24 A.3.4 Gas constant25 A.3.5 Density of outside air 26 A.3.6 Specific heat capacity.26 A.3.7 Correction fact

16、or for temperature.26 A.3.8 Flow safety coefficient26 A.4 Determination of temperatures 27 A.4.1 Flue gas temperatures 27 A.4.2 Coefficient of cooling27 A.4.3 Heat transmission coefficient 27 A.4.4 Internal heat transfer coefficient28 A.5 Density of flue gas.29 A.6 Flue gas velocity29 A.7 Pressure a

17、t entry of flue gas into chimney 30 A.7.1 Calculation of pressure.30 A.7.2 Theoretical draught available due to chimney effect 30 A.7.3 Pressure resistance of the flue gas carrying tube.30 A.7.4 Flue friction coefficient31 A.7.5 Individual resistance coefficient .31 A.7.6 Change in pressure due to c

18、hange of velocity 31 A.7.7 Pressure caused by sudden interruption of the flue gas stream (Implosion).31 A.8 Minimum velocity.32 Annex B (informative) Site activities .37 B.1 Execution37 B.2 Programming and coordination of works.37 B.3 Site safety.37 B.4 Local conditions 38 Bibliography39 EN 13084-1:

19、2007 (E) 4 Foreword This document (EN 13084-1:2007) has been prepared by Technical Committee CEN/TC 297 “Free- standing industrial chimneys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text o

20、r by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. This document supersedes EN 13084-1:2000 This document is part 1 of a package of standards as listed below. EN 13084-1, Free-standing chimneys - Part 1: General require

21、ments EN 13084-2, Free-standing chimneys - Part 2: Concrete chimneys EN 13084-4, Free-standing chimneys - Part 4: Brick liners Design and execution EN 13084-5, Free-standing chimneys - Part 5: Material for brick liners - Product specifications EN 13084-6, Free-standing chimneys - Part 6: Steel liner

22、s - Design and execution EN 13084-7, Free-standing chimneys Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners EN 13084-8, Free-standing chimneys Part 8: Design and execution of mast construction with satellite components Additiona

23、lly applies: EN 1993-3-2, Eurocode 3 - Design of steel structures Part 3-2: Towers, masts and chimneys Chimneys According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria

24、, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13084-1:2007 (E) 5 1 Scope This

25、European Standard deals with the general requirements and the basic performance criteria for the design and construction of all types of free-standing chimneys including their liners. A chimney may also be considered as free-standing, if it is guyed or laterally supported or if it stands on another

26、structure. Chimneys attached to buildings have to be structurally designed as free-standing chimneys in accordance with this European Standard when at least one of the following criteria is met: the distance between the lateral supports is more than 4 m; the free-standing height above the uppermost

27、structural attachment is more than 3 m; the free-standing height above the uppermost structural attachment for chimneys with rectangular cross section is more than five times the smallest external dimension; the horizontal distance between the building and the outer surface of the chimney is more th

28、an 1 m. Chimneys attached to free-standing masts are considered as free-standing chimneys. The structural design of free-standing chimneys takes into account operational conditions and other actions to verify mechanical resistance and stability and safety in use. Detailed requirements relating to sp

29、ecialized designs are given in the standards for concrete chimneys, steel chimneys and liners. NOTE In other parts of the series EN 13084 rules will be given where chimney products in accordance with EN 1443 (and the relating product standards) may be used in free-standing chimneys. 2 Normative refe

30、rences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders -

31、Fusion welding - Part 1: Steels EN 1418, Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials EN 1443, Chimneys - General requirements EN 13084-2, Free-standing chimneys Part 2: Concr

32、ete chimneys EN 13084-4, Free-standing chimneys Part 4: Brick liners Design and execution EN 13084-5, Free-standing chimneys Part 5: Materials for brick liners - Product specifications EN 13084-6, Free-standing chimneys Part 6: Steel liners - Design and execution EN 13084-7, Free-standing chimneys P

33、art 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners EN 13084-1:2007 (E) 6 EN 13084-8, Free-standing chimneys Part 8: Design and execution of mast construction with satellite components EN 1990, Eurocode Basis of structural design EN

34、1991-1-1, Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings EN 1991-1-4:2005, Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions EN 1993-3-2, Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts

35、and chimneys - Chimneys EN 1998-6, Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys EN ISO 3834-2, Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) EN ISO 14731, Welding co-ordi

36、nation - Tasks and responsibilities (ISO 14731:2006) EN ISO 15607, Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) EN ISO 15609-1, Specification and qualification of welding procedures for metallic materials - Welding procedure specificat

37、ion - Part 1: Arc welding (ISO 15609-1:2004) EN ISO 15610, Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) EN ISO 15611, Specification and qualification of welding procedures for metallic materials - Qu

38、alification based on previous welding experience (ISO 15611:2003) EN ISO 15612, Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) EN ISO 15613, Specification and qualification of welding procedure

39、s for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) EN ISO 15614-1, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (IS

40、O 15614-1:2004) EN ISO 15614-2, Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) 3 Terms and definitions For the purposes of this document, the following terms and definitions ap

41、ply. 3.1 windshield structural shell designed for load bearing purposes and to protect the flue from wind actions NOTE It may also function as a flue. EN 13084-1:2007 (E) 7 3.2 lining system total system, if any, which separates the flue gases from the windshield. This comprises a liner and its supp

42、orts, the space between liner and windshield and insulation, where existing 3.3 liner structural membrane of the lining system 3.4 accessible space space between windshield and liner that is designed for entry by personnel 3.5 spoiler device attached to the surface of a chimney with the objective of

43、 reducing cross wind response 3.6 protective cap cap at the top of the chimney which covers the space between windshield and liner 3.7 climbing sockets threaded sockets inserted in the concrete windshield to enable climbing dogs to be attached to the surface 3.8 down draught negative pressure on the

44、 lee-side of the chimney top, which can cause the flue gases to be drawn down 3.9 guyed chimney chimney, the stability of which is ensured by guy ropes 3.10 intransient heat flow flow of heat, where the temperature of each point does not change with time 3.11 transient heat flow flow of heat, where

45、the temperature changes with time 3.12 positive pressure pressure inside the liner which is greater than the pressure outside the liner 3.13 negative pressure pressure inside the liner which is lower than the pressure outside the liner 3.14 flue gas gaseous products of combustion or other processes,

46、 including air, which may comprise of solids or liquids 3.15 concrete chimney chimney, the windshield of which is made of concrete EN 13084-1:2007 (E) 8 3.16 steel chimney chimney, the windshield of which is made of steel 4 Performance requirements; general design 4.1 Materials Materials shall confo

47、rm to the appropriate CEN or ISO standards. Where no such standards exist, other materials may be used if their properties are well defined and their suitability has been proven. This proof shall take account of the mechanical, thermal and chemical loads. For concrete and steel chimneys as well as f

48、or liners see EN 13084-2, EN 13084-4, EN 13084-5, EN 13084-6, EN 13084-7, EN 13084-8 and EN 1993-3-2. 4.2 Flue gas considerations 4.2.1 General Thermal and flow calculations shall be carried out to ensure that the flue gases will be conveyed from the combustion appliance to atmosphere taking into ac

49、count the effects of the flue gases on the environment and the safety in use. However, the effect of the flue gases concerning the pollution with gaseous and particle components is not the subject matter of this standard. To carry out these calculations, design parameters as stated in 4.2.2 are required. These also apply to the assessment of chemical attack on those structural elements which are in contact with flue gases. 4.2.2 Design parameters The following design parameters shall take into account the various operating co