DIN EN 13108-1-2016 Bituminous mixtures - Material specifications - Part 1 Asphalt Concrete German version EN 13108-1 2016《沥青混合物 材料规范 第1部分 沥青混凝土 德文版本EN 13108-1-2016》.pdf

1、December 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!%D“2596133www.din.deD

2、IN EN 13108-1Bituminous mixtures Material specifications Part 1: Asphalt Concrete;English version EN 131081:2016,English translation of DIN EN 13108-1:2016-12Asphaltmischgut Mischgutanforderungen Teil 1: Asphaltbeton;Englische Fassung EN 131081:2016,Englische bersetzung von DIN EN 13108-1:2016-12Mla

3、nges bitumineux Spcifications pour le matriau Partie 1: Enrobs bitumineux;Version anglaise EN 131081:2016,Traduction anglaise de DIN EN 13108-1:2016-12SupersedesDIN EN 131081:200608 andDIN EN 131081Corrigendum1:200806See start of applicationwww.beuth.deDocument comprises 50 pagesDTranslation by DIN-

4、Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 13108-1:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity marki

5、ng of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the Europ

6、ean Commission or of the relevant building authority. The standards which this document replaces, DIN EN 13108-1:2006-08 and DIN EN 13108-1 Corrigendum 1:2008-06, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of

7、the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13108-1:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss B

8、auwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-10-10 AA Asphalt (SpA zu CEN/TC 227/WG 1) Gemeinschaftsausschuss mit FGSV. Amendments This standard differs from DIN EN 13108-1:2006-08 and DIN EN 13108-1 Corrigendum 1:2008-06 as follows: a) general, empirica

9、l and fundamental approaches have been merged into one list with different properties; b) new properties have been introduced (saturation tensile stiffness conditioning test, low temperature properties, fracture toughness, friction after polishing); c) additional optional sieves for the characteriza

10、tion of the grading have been introduced; d) for several properties additional categories have been introduced; e) specific conditions may now be defined in documents related to the application of the product; f) reference to the EU Construction Products Regulation and a new Annex ZA according to CP

11、R rules have been included. Previous editions DIN EN 13108-1: 2006-08 DIN EN 13108-1 Corrigendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-1 June 2016 ICS 93.080.20 Supersedes EN 13108-1:2006English Version Bituminous mixtures - Material specifications - Part 1: Asphalt C

12、oncrete Mlanges bitumineux - Spcifications pour le matriau -Partie 1: Enrobs bitumineux Asphaltmischgut - Mischgutanforderungen - Teil 1: Asphaltbeton This European Standard was approved by CEN on 27 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipu

13、late the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European S

14、tandard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the

15、national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

16、 Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any

17、 means reserved worldwide for CEN national Members. Ref. No. EN 13108-1:2016 EEN 13108-1:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations 11

18、 4 Requirements for constituent materials . 11 4.1 General . 11 4.2 Binder . 11 4.2.1 General . 11 4.2.2 Selection of binder . 11 4.3 Aggregates 13 4.3.1 Coarse aggregate 13 4.3.2 Fine aggregate . 13 4.3.3 All-in aggregates . 13 4.3.4 Added filler . 13 4.4 Reclaimed asphalt 13 4.5 Additives 13 5 Req

19、uirements for the mixture . 14 5.1 General . 14 5.2 Composition, grading, binder content 14 5.2.1 Composition . 14 5.2.2 Grading . 14 5.2.3 Minimum binder content 16 5.3 Properties . 17 5.3.1 Specimens . 17 5.3.2 Void content requirements 17 5.3.3 Water sensitivity 21 5.3.4 Resistance to abrasion by

20、 studded tyres . 22 5.3.5 Resistance to permanent deformation . 23 5.3.6 Stiffness 27 5.3.7 Resistance to fatigue . 29 5.3.8 Saturation Ageing Tensile Stiffness conditioning test (Mixture SATS Durability Index) . 30 5.3.9 Low temperature properties . 30 5.3.10 Fracture toughness 31 5.3.11 Friction a

21、fter polishing 32 5.3.12 Coating and homogeneity 33 5.3.13 Reaction to fire 33 5.3.14 Marshall values for application on airfields . 33 5.3.15 Resistance to fuel for application on airfields . 35 5.3.16 Resistance to de-icing fluid for application on airfields 36 5.4 Temperature of the mixture 37 5.

22、5 Regulated dangerous substances . 37 DIN EN 13108-1:2016-12 EN 13108-1:2016 (E) 3 5.6 Conflicting requirements . 37 6 Assessment and verification of constancy of performance AVCP 38 7 Identification 38 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mix

23、ture when reclaimed asphalt is used 40 A.1 General . 40 A.2 Calculation of the penetration of the binder of a mixture . 40 A.3 Calculation of the softening point of the binder of a mixture . 40 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 42 DIN E

24、N 13108-1:2016-12 EN 13108-1:2016 (E) 4 European foreword This document (EN 13108-1:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of a

25、n identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

26、 held responsible for identifying any or all such patent rights. This document supersedes EN 13108-1:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No 305/20

27、11 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral part of this document. Compared with EN 13108-1:2006, the following changes have been made: a) general, empirical and fundamental approaches have been merged into one l

28、ist with different properties; b) new properties introduced (saturation tensile stiffness conditioning test, low temperature properties, fracture toughness, friction after polishing); c) additional optional sieves for the characterization of the grading; d) for several properties additional categori

29、es are introduced; e) possibility to define specific conditions in documents related to the application of the product; f) CPR reference and new Annex ZA according CPR rules. This European Standard is one of a series of standards as listed below: EN 13108-1, Bituminous mixtures Material specificatio

30、ns Part 1: Asphalt Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN

31、13108-5, Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt DIN EN 13108-1:2016-12 EN 13108-1:2016 (E) 5 EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt EN 13108-8, Bit

32、uminous mixtures Material specifications Part 8: Reclaimed Asphalt EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layers (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material specificati

33、ons Part 21: Factory Production Control Annex A (normative) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binder and the recovered binder from the reclaimed asphalt. According to the C

34、EN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

35、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13108-1:2016-12 EN 13108-1:2016 (E) 6 Introduction The aim of this European Standard is to enable

36、specification of Asphalt Concrete mixtures on a performance basis. In general, however, there are currently more empirical tests available to describe the mixtures. Depending on the experience with the combination of requirements in this European standard more or less degrees of freedom for the prod

37、ucer may be given. This European Standard covers a large variety of materials for different applications, traffic and climate conditions. EN 13108-1 gives properties and listings of possible categories. It has to accommodate the road industry for all of Europe. For this reason the menu approach for

38、properties has been chosen. The Tables represent categories that are required all over Europe. For this reason numerical values in Tables do not always obey statistical rules. Based on conditions of use specific properties and categories may be defined in documents related to the application of the

39、product. The categories defined in those documents need to take into account the reproducibility of the test when this is given in the appropriate test method. Care should be taken to only select those tests which are relevant to the application of the asphalt and the use of the pavement and to avoi

40、d a combination of potentially conflicting requirements. DIN EN 13108-1:2016-12 EN 13108-1:2016 (E) 7 1 Scope This European Standard specifies requirements for mixtures of the mix group Asphalt Concrete for use on roads, airfields and other trafficked areas. Asphalt Concrete is used for surface cour

41、ses, binder courses, regulating courses, and bases. The mixtures of the mix group Asphalt Concrete are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requi

42、rements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated ref

43、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1097-6, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1426, Bitumen and

44、 bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt

45、 Part 3: Bitumen recovery: Rotary evaporator EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bit

46、uminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel t

47、racking EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-31

48、, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor DIN EN 13108-1:2016-12 EN 13108-1:2016 (E) 8 EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-41, Bituminous mixtures Test methods for hot mix a

49、sphalt Part 41: Resistance to de-icing fluids EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bituminous mixtures Test methods for hot mix asphalt Part 45: Saturati