1、December 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!%Q“2596146www.din.deD
2、IN EN 13108-4Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt;English version EN 131084:2016,English translation of DIN EN 13108-4:2016-12Asphaltmischgut Mischgutanforderungen Teil 4: HotRolledAsphalt;Englische Fassung EN 131084:2016,Englische bersetzung von DIN EN 13108-4:2016
3、-12Mlanges bitumineux Spcifications des matriaux Partie 4: Hot Rolled Asphalt;Version anglaise EN 131084:2016,Traduction anglaise de DIN EN 13108-4:2016-12SupersedesDIN EN 131084:200608 andDIN EN 131084Corrigendum 1:200806See start of applicationwww.beuth.deDocument comprises 41 pagesDTranslation by
4、 DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 13108-4:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity
5、marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the
6、European Commission or of the relevant building authority. The standards which this document replaces, DIN EN 13108-4:2006-08 and DIN EN 13108-4 Corrigendum 1:2008-06, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journa
7、l of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13108-4:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenaussch
8、uss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-10-10 AA Asphalt (SpA zu CEN/TC 227/WG 1) Gemeinschaftsausschuss mit FGSV. Amendments This standard differs from DIN EN 13108-4:2006-08 and DIN EN 13108-4 Corrigendum 1:2008-06 as follows: a) general, emp
9、irical and fundamental approaches have been merged into one list with different properties; b) new properties have been introduced (low temperature properties); c) additional optional sieves for the characterization of the grading have been introduced; d) for several properties additional categories
10、 have been introduced; e) specific conditions may now be defined in documents related to the application of the product; f) reference to the EU Construction Products Regulation and a new Annex ZA according to CPR rules have been included. Previous editions DIN EN 13108-4: 2006-08 DIN EN 13108-4 Corr
11、igendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-4 June 2016 ICS 93.080.20 Supersedes EN 13108-4:2006English Version Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt Mlanges bitumineux - Spcifications des matriaux - Partie 4: Hot Rolled Asphalt
12、Asphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled Asphalt This European Standard was approved by CEN on 27 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national sta
13、ndard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in
14、any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Re
15、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPE
16、AN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-4:2016 EEN 1
17、3108-4:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations 11 4 Requirements for constituent materials . 11 4.1 General . 11 4.2 Binder . 11 4.
18、2.1 General . 11 4.2.2 Selection of binder . 11 4.3 Aggregates 13 4.3.1 Coarse aggregate 13 4.3.2 Fine aggregate . 13 4.3.3 All-in aggregates . 13 4.3.4 Added filler . 13 4.4 Reclaimed asphalt 13 4.5 Additives 14 4.6 Coated chippings 14 5 Requirements for the mixture . 14 5.1 General . 14 5.2 Compos
19、ition, grading and binder content 14 5.2.1 Composition . 14 5.2.2 Grading . 14 5.2.3 Minimum binder content 18 5.3 Properties . 18 5.3.1 Specimens . 18 5.3.2 Minimum binder volume . 18 5.3.3 Void content . 19 5.3.4 Water sensitivity 20 5.3.5 Resistance to permanent deformation . 21 5.3.6 Stiffness 2
20、2 5.3.7 Low temperature properties . 24 5.3.8 Coating and homogeneity 25 5.3.9 Reaction to fire 25 5.3.10 Resistance to fuel for application on airfields . 25 5.3.11 Resistance to de-icing fluid for application on airfields 26 5.4 Temperature of the mixture 26 5.5 Regulated dangerous substances . 27
21、 5.6 Conflicting requirements 27 6 Assessment and verification of constancy of performance AVCP . 27 7 Identification . 28 DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 3 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used
22、 29 A.1 General . 29 A.2 Calculation of the penetration of the binder of a mixture . 29 A.3 Calculation of the softening point of the binder of a mixture . 29 Annex B (normative) Natural asphalt. 31 B.1 Scope . 31 B.2 Requirements . 31 B.3 Methods of use . 32 B.4 Determination of ash content 32 Anne
23、x C (normative) Coated chippings for application to Hot Rolled Asphalt surface course . 33 C.1 Scope . 33 C.2 Chippings . 33 C.3 Binder content . 33 C.4 Assessment and verification of constancy of performance . 33 C.5 Identification 33 Annex ZA (informative) Relationship of this European Standard wi
24、th Regulation (EU) No. 305/2011 . 34 ZA.1 Scope and relevant characteristics 34 ZA.2 Procedure for AVCP of Hot Rolled Asphalt 35 ZA.3 Assignment of AVCP tasks . 36 DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 4 European foreword This document (EN 13108-4:2016) has been prepared by Technical Committee
25、CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the la
26、test by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-4:2006. This document has been p
27、repared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral
28、 part of this European Standard. Compared with EN 13108-4:2006, the following changes have been made: a) general, empirical and fundamental approaches have been merged into one list with different properties; b) new properties introduced (low temperature properties); c) additional optional sieves fo
29、r the characterization of the grading; d) for several properties additional categories are introduced; e) possibility to define specific conditions in documents related to the application of the product; f) CPR reference and new Annex ZA according to CPR rules. This European Standard is one of a ser
30、ies as listed below: EN 13108-1, Bituminous mixtures Material specifications Part 1: Asphalt Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4,
31、Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN 13108-5, Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: P
32、orous Asphalt DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 5 EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed Asphalt EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Pa
33、rt 20: Type Testing EN 13108-21, Bituminous mixtures Material specifications Part 21: Factory Production Control Annex A (normative) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binde
34、r and the recovered binder from the reclaimed asphalt. Annex B (normative) gives specifications for natural asphalt. Annex C (normative) gives specifications for coated chippings. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are b
35、ound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
36、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 6 Introduction The aim of this European Standard is to specify bituminous mixtures on a performance level. Specifications for Hot Rolled Asphalt have traditionally
37、been based on compositional recipes combined with specifications for the constituent materials with additional requirements based on tests on the product. Although more tests are available to provide information on the performance of the material, they are still insufficient to cover the actual perf
38、ormance of the material in the road. Therefore a combination with composition and specifications for the constituent materials will still be necessary. This European Standard covers a large variety of materials for different applications, traffic and climate conditions. EN 13108-4 gives properties a
39、nd listings of possible categories. It has to accommodate the road industry for all of Europe. For this reason the menu approach for properties has been chosen. The tables represent categories that are required all over Europe. For this reason numerical values in tables do not always obey statistica
40、l rules. Based on conditions of use specific properties and categories may be defined in documents related to the application of the product. The categories defined in those documents need to take into account the reproducibility of the test when this is given in the appropriate test method. Care sh
41、ould be taken to only select those tests which are relevant to the application of the asphalt and the use of the pavement and to avoid a combination of potentially conflicting requirements. DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 7 1 Scope This European Standard specifies requirements for mixture
42、s of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases. The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bi
43、tumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21. 2 Normative references The foll
44、owing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10976:2013,
45、Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 1
46、2591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12592, Bitumen and bituminous binders Determination of solubility EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods
47、 Part 4: Bitumen recovery: Fractionating column EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of
48、bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12
49、697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids DIN EN 13108-4:2016-12 EN 13108-4:2016 (E) 8 EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Par
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1