1、December 2016 English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!%S“2596148www.din.deD
2、IN EN 13108-5Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt;English version EN 131085:2016,English translation of DIN EN 13108-5:2016-12Asphaltmischgut Mischgutanforderungen Teil 5: Splittmastixasphalt;Englische Fassung EN 131085:2016,Englische bersetzung von DIN EN 13108-5
3、:2016-12Mlanges bitumineux Spcifications des matriaux Partie 5: Bton bitumineux grenu forte teneur en mastic;Version anglaise EN 131085:2016,Traduction anglaise de DIN EN 13108-5:2016-12SupersedesDIN EN 131085:200608 andDIN EN 131085Corrigendum1:200806See start of applicationwww.beuth.deDocument com
4、prises 47 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 13108-5:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted th
5、at, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should
6、 refer to the websites of the European Commission or of the relevant building authority. The standards which this document replaces, DIN EN 13108-5:2006-08 and DIN EN 13108-5 Corrigendum 1:2008-06, may be used in parallel with this standard during a specified transition period where such has been la
7、id down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13108-5:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its pr
8、eparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-10-10 AA Asphalt (SpA zu CEN/TC 227/WG 1) Gemeinschaftsausschuss mit FGSV. Amendments This standard differs from DIN EN 13108-5:2006-08 and DIN EN 13108-5 Corrigendum 1:2008-
9、06 as follows: a) a fundamental approach has been added and merged with the empirical approach into one list with different properties; b) new properties have been introduced (stiffness, fatigue, saturation tensile stiffness conditioning test, low temperature properties, fracture toughness, friction
10、 after polishing); c) for several properties additional categories have been introduced; d) specific conditions may now be defined in documents related to the application of the product; e) reference to the EU Construction Products Regulation and a new Annex ZA according to CPR rules have been inclu
11、ded. Previous editions DIN EN 13108-5: 2006-08 DIN EN 13108-5 Corrigendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-5 June 2016 ICS 93.080.20 Supersedes EN 13108-5:2006English Version Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt Mlanges bit
12、umineux - Spcifications des matriaux - Partie 5: Bton bitumineux grenu forte teneur en mastic Asphaltmischgut - Mischgutanforderungen - Teil 5: Splittmastixasphalt This European Standard was approved by CEN on 27 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulation
13、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. Th
14、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN mem
15、bers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu
16、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any fo
17、rm and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-5:2016 EEN 13108-5:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms and definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and
18、abbreviations 11 4 Requirements for constituent materials . 11 4.1 General . 11 4.2 Binder . 11 4.2.1 General . 11 4.2.2 Selection of binder . 11 4.3 Aggregates 13 4.3.1 Coarse aggregates 13 4.3.2 Fine aggregate . 13 4.3.3 All-in aggregates . 13 4.3.4 Added filler . 13 4.4 Reclaimed asphalt 13 4.5 A
19、dditives 13 5 Requirements for the mixture . 14 5.1 General . 14 5.2 Composition, grading, binder content and additives 14 5.2.1 Composition . 14 5.2.2 Grading . 14 5.2.3 Minimum binder content 16 5.3 Properties . 17 5.3.1 Specimens . 17 5.3.2 Void content requirements 17 5.3.3 Binder drainage 21 5.
20、3.4 Water sensitivity 21 5.3.5 Resistance to abrasion by studded tyres . 22 5.3.6 Resistance to permanent deformation . 23 5.3.7 Stiffness 27 5.3.8 Resistance to fatigue . 29 5.3.9 Low temperature properties . 29 5.3.10 Fracture toughness 30 5.3.11 Friction after polishing 31 5.3.12 Coating and homo
21、geneity 32 5.3.13 Reaction to fire 32 5.3.14 Resistance to fuel for application on airfields . 32 5.3.15 Resistance to de-icing fluid for application on airfields 33 5.4 Temperature of the mixture 34 5.5 Regulated dangerous substances . 34 5.6 Conflicting requirements 34 DIN EN 13108-5:2016-12 EN 13
22、108-5:2016 (E) 3 6 Assessment and verification of constancy of performance AVCP 35 7 Identification 35 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used 37 A.1 General . 37 A.2 Calculation of the penetration of the bi
23、nder of a mixture . 37 A.3 Calculation of the softening point of the binder of a mixture . 37 Annex ZA (informative) Relationship of this European Standard with Regulation (EU) No. 305/2011 . 39 ZA.1 Scope and relevant characteristics 39 ZA.2 System of Assessment and Verification of Constancy of Per
24、formance (AVCP) 41 ZA.3 Assignment of AVCP tasks . 41 Bibliography . 45 DIN EN 13108-5:2016-12 EN 13108-5:2016 (E) 4 European foreword This document (EN 13108-5:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard
25、 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this
26、document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-5:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade
27、Association, and supports essential requirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA which is an integral part of this European Standard. Compared with EN 13108-5:2006, the following changes have b
28、een made: a) a fundamental approach has been added and merged with the empirical approach into one list with different properties; b) new properties introduced (stiffness, fatigue, saturation tensile stiffness conditioning test, low temperature properties, fracture toughness, friction after polishin
29、g); c) for several properties additional categories are introduced; d) possibility to define specific conditions in documents related to the application of the product; e) CPR reference and new Annex ZA according to CPR rules. This European Standard is one of a series as listed below: EN 13108-1, Bi
30、tuminous mixtures Material specifications Part 1: Asphalt Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specif
31、ications Part 4: Hot Rolled Asphalt EN 13108-5, Bituminous mixtures Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt EN 13108-8, Bituminou
32、s mixtures Material specifications Part 8: Reclaimed Asphalt DIN EN 13108-5:2016-12 EN 13108-5:2016 (E) 5 EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bi
33、tuminous mixtures Material specifications Part 21: Factory Production Control Annex A (normative) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binder and the recovered binder from the
34、 reclaimed asphalt. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Ma
35、cedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13108-5:2016-12 EN 13108-5:2016 (E) 6 Introduction The aim o
36、f this European Standard is to enable specification of Stone Mastic Asphalt on a performance basis. In general, however, there are currently more empirical tests available to describe the mixtures. Depending on the experience with the combination of requirements in this European standard more or les
37、s degrees of freedom for the producer may be given. This European Standard covers a large variety of materials for different applications, traffic and climate conditions. EN 13108-5 gives properties and listings of possible categories. It has to accommodate the road industry for all of Europe. For t
38、his reason the menu approach for properties has been chosen. The tables represent categories that are required all over Europe. For this reason numerical values in tables do not always obey statistical rules. Based on conditions of use specific properties and categories may be defined in documents r
39、elated to the application of the product. The categories defined in those documents need to take into account the reproducibility of the test when this is given in the appropriate test method. Care should be taken to only select those tests which are relevant to the application of the asphalt and th
40、e use of the pavement and to avoid a combination of potentially conflicting requirements. DIN EN 13108-5:2016-12 EN 13108-5:2016 (E) 7 1 Scope This European Standard specifies requirements for mixtures of the mix group Stone Mastic Asphalt for use on roads, airfields and other trafficked areas. Ston
41、e Mastic Asphalt is mainly to be used for surface courses. Stone Mastic Asphalt can also be used for regulating and binder courses. The mixtures of the mix group Stone Mastic Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in si
42、tu recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21. 2 Normative references The following documents, in whole or in part, are normatively
43、referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10976:2013, Tests for mechanical and physical properties of aggreg
44、ates Part 6: Determination of particle density and water absorption EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitumen and bituminous binders Determination of the softening point Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications fo
45、r paving grade bitumens EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods Part 4: Bitumen recovery: Fractionating column EN 12697-8, Bituminous mixtures Test methods for hot mix asphalt Part 8: De
46、termination of void characteristics of bituminous specimens EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN
47、12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking EN 12697-24, Bitumino
48、us mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test DIN EN 13108-5:2016-12 EN 13108-5:2016 (E) 8 EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiff
49、ness EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-46, Bitum
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1