1、December 2016 English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93.080.20!%T“2596149www.din.deD
2、IN EN 13108-6Bituminous mixtures Material specifications Part 6: Mastic Asphalt;English version EN 131086:2016,English translation of DIN EN 13108-6:2016-12Asphaltmischgut Mischgutanforderungen Teil 6: Gussasphalt;Englische Fassung EN 131086:2016,Englische bersetzung von DIN EN 13108-6:2016-12Mlange
3、s bitumineux Spcifications pour le matriau Partie 6: Asphaltes couls routiers;Version anglaise EN 131086:2016,Traduction anglaise de DIN EN 13108-6:2016-12SupersedesDIN EN 131086:200608 andDIN EN 131086Corrigendum1:200806See start of applicationwww.beuth.deDocument comprises 34 pagesDTranslation by
4、DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.12.16 DIN EN 13108-6:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity m
5、arking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the E
6、uropean Commission or of the relevant building authority. The standards which this document replaces, DIN EN 13108-6:2006-08 and DIN EN 13108-6 Corrigendum 1:2008-06, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal
7、 of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13108-6:2016) has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschu
8、ss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-10-10 AA Asphalt (SpA zu CEN/TC 227/WG 1) Gemeinschaftsausschuss mit FGSV. Amendments This standard differs from DIN EN 13108-6:2006-08 and DIN EN 13108-6 Corrigendum 1:2008-06 as follows: a) new propertie
9、s have been introduced (low temperature properties); b) additional optional sieves for the characterization of the grading have been introduced; c) for several properties additional categories have been introduced; d) specific conditions may now be defined in documents related to the application of
10、the product; e) reference to the EU Construction Products Regulation and a new Annex ZA according to CPR rules have been included. Previous editions DIN EN 13108-6: 2006-08 DIN EN 13108-6 Corrigendum 1: 2008-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13108-6 June 2016 ICS 93.080.20 Supe
11、rsedes EN 13108-6:2006English Version Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt Mlanges bitumineux - Spcifications pour le matriau -Partie 6: Asphaltes couls routiers Asphaltmischgut - Mischgutanforderungen - Teil 6: Gussasphalt This European Standard was approved by CEN
12、 on 27 February 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard
13、s may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif
14、ied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice
15、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Mana
16、gement Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13108-6:2016 EEN 13108-6:2016 (E) 2 Contents Page European foreword . 4 Introduction 6 1 Scope 7 2 Normative references 7 3 Terms
17、 and definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations 10 4 Requirements for constituent materials . 10 4.1 General . 10 4.2 Binder . 11 4.2.1 General . 11 4.2.2 Selection of Binder . 11 4.2.3 Mixes with reclaimed asphalt 11 4.3 Aggregates 12 4.3.
18、1 Coarse aggregate 12 4.3.2 Fine aggregate . 12 4.3.3 All-in aggregates . 12 4.3.4 Added filler . 12 4.4 Reclaimed asphalt 12 4.5 Additives 12 5 Requirements for the mixture . 13 5.1 General . 13 5.2 Composition, grading, binder content 13 5.2.1 Composition . 13 5.2.2 Grading . 13 5.2.3 Minimum bind
19、er content 15 5.3 Properties . 16 5.3.1 Specimens . 16 5.3.2 Indentation and resistance to permanent deformation 16 5.3.3 Low temperature properties . 19 5.3.4 Coating and homogeneity 20 5.3.5 Reaction to fire 20 5.3.6 Resistance to fuel for application on airfields . 20 5.3.7 Resistance to de-icing
20、 fluid for application on airfields 21 5.4 Temperature of the mixture 21 5.5 Regulated dangerous substances . 22 6 Assessment and verification of constancy of performance AVCP . 22 7 Identification . 22 Annex A (normative) Calculations of the penetration or the softening point of the binder of a mix
21、ture when reclaimed asphalt is used . 24 A.1 General . 24 A.2 Calculation of the penetration of the binder of a mixture . 24 DIN EN 13108-6:2016-12EN 13108-6:2016 (E) 3 A.3 Calculation of the softening point of the binder of a mixture . 24 Annex ZA (informative) Relationship of this European Standar
22、d with Regulation (EU) No. 305/2011 . 26 ZA.1 Scope and relevant characteristics 26 ZA.2 Procedure for AVCP of Mastic Asphalt 28 ZA.3 Assignment of AVCP tasks . 28 Bibliography . 32 DIN EN 13108-6:2016-12EN 13108-6:2016 (E) 4 European foreword This document (EN 13108-6:2016) has been prepared by Tec
23、hnical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be wi
24、thdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13108-6:2006. This do
25、cument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No 305/2011 for construction products (CPR). For relationship with Regulation (EU) No 305/2011 see informative Annex ZA whi
26、ch is an integral part of this European Standard. Compared with EN 13108-6:2006, the following changes have been made: a) new property introduced (low temperature properties); b) additional optional sieves for the characterization of the grading; c) for several properties additional categories are i
27、ntroduced; d) possibility to define specific conditions in documents related to the application of the product; e) CPR reference and new Annex ZA according to CPR rules. This European Standard is one of a series as listed below: EN 13108-1, Bituminous mixtures Material specifications Part 1: Asphalt
28、 Concrete EN 13108-2, Bituminous mixtures Material specifications Part 2: Asphalt Concrete for Very Thin Layers (BBTM) EN 13108-3, Bituminous mixtures Material specifications Part 3: Soft Asphalt EN 13108-4, Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN 13108-5, Bituminou
29、s mixtures Material specifications Part 5: Stone Mastic Asphalt EN 13108-6, Bituminous mixtures Material specifications Part 6: Mastic Asphalt EN 13108-7, Bituminous mixtures Material specifications Part 7: Porous Asphalt EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed Asph
30、alt DIN EN 13108-6:2016-12EN 13108-6:2016 (E) 5 EN 13108-9, Bituminous mixtures Material specifications Part 9: Asphalt for Ultra-Thin Layer (AUTL) EN 13108-20, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material specifications Part 21: Factory
31、 Production Control Annex A (normative) details the calculation of the penetration or the softening point in mixtures containing reclaimed asphalt from the penetrations or softening points of the added binder and the recovered binder from the reclaimed asphalt. According to the CEN/CENELEC Internal
32、Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irelan
33、d, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13108-6:2016-12EN 13108-6:2016 (E) 6 Introduction The aim of this European Standard is to enable specification of Mast
34、ic Asphalt mixtures on a performance basis. In general, however, there are currently more empirical tests available to describe the mixtures. The standard for Mastic Asphalt has only empirical requirements. This European Standard covers a large variety of materials for different applications, traffi
35、c and climate conditions. EN 13108-6 gives properties and listings of possible categories. It has to accommodate the road industry for all of Europe. For this reason the menu approach for properties has been chosen. The tables represent categories that are required all over Europe. For this reason n
36、umerical values in tables do not always obey statistical rules. Based on conditions of use specific properties and categories may be defined in documents related to the application of the product. The categories defined in those documents need to take into account the reproducibility of the test whe
37、n this is given in the appropriate test method. Care should be taken to only select those tests which are relevant to the application of the asphalt and the use of the pavement and to avoid a combination of potentially conflicting requirements. DIN EN 13108-6:2016-12EN 13108-6:2016 (E) 7 1 Scope Thi
38、s European Standard specifies requirements for mixtures of the mix group Mastic Asphalt for use on roads, airfields and other trafficked areas. Mastic Asphalt is used for surface courses, binder courses, protection layers and inter-layers for bridges, tunnels and troughs. The mixtures of the mix gro
39、up Mastic Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read
40、 in conjunction with EN 13108-20 and EN 13108-21. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest editi
41、on of the referenced document (including any amendments) applies. EN 10976:2013, Tests for mechanical and physical properties of aggregates Part 6: Determination of particle density and water absorption EN 1426, Bitumen and bituminous binders Determination of needle penetration EN 1427, Bitumen and
42、bituminous binders Determination of the softening point Ring and Ball method EN 12591, Bitumen and bituminous binders Specifications for paving grade bitumens EN 12697-3, Bituminous mixtures Test methods for hot mix asphalt Part 3: Bitumen recovery: Rotary evaporator EN 12697-13, Bituminous mixtures
43、 Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-20, Bituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or cylindrical specimens (CY) EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specim
44、ens EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fue
45、l EN 12697-46, Bituminous mixtures Test methods for hot mix asphalt Part 46: Low temperature cracking and properties by uniaxial tension tests EN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas DIN EN 13108-6:2016-12EN 13108-6:2016 (E)
46、 8 EN 13108-4:2016, Bituminous mixtures Material specifications Part 4: Hot Rolled Asphalt EN 13108-8, Bituminous mixtures Material specifications Part 8: Reclaimed asphalt EN 13108-20:2016, Bituminous mixtures Material specifications Part 20: Type Testing EN 13108-21, Bituminous mixtures Material s
47、pecifications Part 21: Factory Production Control EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13924-1, Bitumen and bituminous binders Specification framework for special paving grade bitu
48、men Part 1: Hard paving grade bitumens EN 14023, Bitumen and bituminous binders Specification framework for polymer modified bitumens EN ISO 11925-2, Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test (ISO 11925-2) 3 Terms and de
49、finitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 pavement structure, composed of one or more courses, to assist the passage of traffic over terrain 3.1.2 layer element of a pavement laid in a single operation 3.1.3 course element of a pavement con
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1