DIN EN 13113-2011 Tannery machines - Roller coating machines - Safety requirements German version EN 13113 2002+A1 2010《制革机 辊筒涂层机 安全性要求 德文版本EN 13113-2002+A1-2010》.pdf

1、May 2011 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59

2、.140.40!$o:Z“1762355www.din.deDDIN EN 13113Tannery machines Roller coating machines Safety requirements (includes Amendment A1:2010)English translation of DIN EN 13113:2011-05Gerberei-Maschinen Walzenauftragmaschinen Sicherheitsanforderungen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 13

3、113:2011-05Machines de tannerie Machines denduction rouleaux Prescriptions de scurit (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 13113:2011-05SupersedesDIN EN 13113:2003-09www.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be considered authoritativ

4、e.4104.11 DIN EN 13113:2011-05 A comma is used as the decimal marker. Start of application The start of application of this standard is 1 May 2011. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 200 “Tannery machinery Safet

5、y” (Secretariat: UNI, Italy). The national committee representing German interests in the standard is the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-26-69-02 AK Lederherstellungs- und Pelzmaschinen. Since the EN was developed without the parti

6、cipation of German experts, however, its adoption as a national standard is a formality only. This standard contains specifications meeting the essential requirements set out in Annex I of the new “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed o

7、n the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this

8、 standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and the Bibliography of this document have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendment

9、s This standard differs from DIN EN 13113:2003-09 as follows: a) the introduction has been modified; b) Clause 1 “Scope” has been modified; c) Clause 2 “Normative references” has been modified; d) Clause 3 “Terms and definitions” has been modified; e) Clause 4 “List of significant hazards” has been

10、modified; f) Clause 5 “Safety requirements and/or measures” has been modified; g) Clause 6 “Verification of the safety requirements and/or measures” has been modified; h) Clause 7 “Information for use” has been modified; i) Figure 1 “Roller coating machine” has been modified; j) Annex ZA (informativ

11、e) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been modified; k) the Bibliography has been modified. Previous editions DIN EN 13113: 2003-09 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13113:2002+A1 August 2010 ICS 59.140.40

12、Supersedes EN 13113:2002English Version Tannery machines - Roller coating machines - Safety requirements Machines de tannerie - Machines denduction rouleaux - Prescriptions de scurit Gerberei-Maschinen - Walzenauftragmaschinen - Sicherheitsanforderungen This European Standard was approved by CEN on

13、27 December 2001 and includes Amendment 1 approved by CEN on 22 July 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog

14、raphical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of

15、 a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icela

16、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue

17、Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13113:2002+A1:2010: EEN 13113:2002+A1:2010 (E) 2 Contents Page Foreword 4Introduction . 51 Scope 52 Normative references 53 Terms and definitions . 74

18、!List of significant hazards“ 94.1 Mechanical hazards . 104.1.1 Single roller contra-rotating machine 104.1.2 Single roller contra-rotating machine with spreading belts 104.1.3 Single roller synchronised machine 104.1.4 Single roller synchronised machine with spreading belts 114.1.5 Single roller sy

19、nchronised machine with rubberised roller 114.1.6 Single roller contra-rotating / synchronised machine (combined machine) Contra-rotating working configuration . 114.1.7 Single roller contra-rotating / synchronised machine (combined machine) Synchronised working configuration . 114.2 High pressure f

20、luid ejection . 124.3 Electrical hazard 124.4 Slip trip and fall hazard . 124.5 Noise . 124.6 Thermal hazard 134.7 Roller changing 134.8 Disassembly . 134.9 Belt washing system . 134.10 Sides access 135 Safety requirements and/or measures 145.1 General 145.2 Common requirements concerning Roller coa

21、ting machines 145.2.1 Mechanical equipment 145.2.2 High pressure fluid ejection . 155.2.3 Electrical equipment (for all machines) . 155.2.4 Slip, trip and fall hazard 155.2.5 Noise . 155.2.6 Control system . 165.2.7 Emergency stop equipment 165.2.8 Maintenance and cleaning 175.2.9 Hot surfaces . 185

22、.2.10 Coating roller changing 185.2.11 Disassembly . 185.2.12 Belt washing system . 185.2.13 Sides access 185.3 Requirements concerning hazards in the working zone . 185.3.1 Single roller- contra-rotating machine with feeding table (see Figure 2a) 185.3.2 Single roller- contra-rotating machine with

23、spreading belt (see Figure 2b) 195.3.3 Single roller synchronised machine with feeding table (see Figure 3a) 195.3.4 Single roller synchronised machine with spreading belts (see Figure 3b) . 205.3.5 Single roller synchronised machine with rubberised roller (see Figure 3c) . 205.3.6 Single roller con

24、tra-rotating /synchronised machine (combined machine) Contra-rotating working configuration (see Figure 4a) 20DIN EN 13113:2011-05 EN 13113:2002+A1:2010 (E) 3 5.3.7 Single roller contra-rotating /synchronised machine (combined machine) Synchronised working configuration (see Figure 4b) 216 Verificat

25、ion of the safety requirements and/or measures . 217 Information for use 297.1 General 297.2 Signal and warning devices . 297.3 Instruction handbook 297.3.1 Machine. 297.3.2 Installation of the machine . 307.3.3 Transportation and Storage of the machine and machine parts 307.3.4 Use of the machine 3

26、07.3.5 Maintenance . 317.4 Marking . 31Annex A (normative) Machinery description . 37Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“ . 38Bibliography 39DIN EN 13113:2011-05 EN 13113:2002+A1:2010 (E) 4 Foreword This docume

27、nt (EN 13113:2002+A1:2010) has been prepared by Technical Committee CEN/TC 200 “Tannery machinery - Safety“, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

28、y February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all suc

29、h patent rights. This document includes Amendment 1, approved by CEN on 2010-07-22. This document supersedes EN 13113:2002. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. !This document has been prepared under a mandate given to CEN by the Europ

30、ean Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.“ Annex A is normative. According to the CEN/CENELEC Internal Regulations, the n

31、ational standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlan

32、ds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13113:2011-05 EN 13113:2002+A1:2010 (E) 5 Introduction !This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous si

33、tuations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for ma

34、chines that have been designed and built according to the provisions of this type C standard.“ 1 Scope This European Standard deals with the following roller coating machines (see Figures 2 to 4 and normative annex A for description): a) single and multi-roller contra-rotating machines (see Figure 2

35、); b) single and multi-roller synchronised machines (see Figure 3); c) single and multi roller- contra-rotating /synchronised machines, so-called combined machines (see Figure 4). The machines are not intended to be used during transportation. This standard specifies safety requirements for design,

36、construction and operation. It takes account of intended use, foreseeable misuse, component and systems failure. This standard takes account of material feeding and handling devices which, when attached to the machine, become an integral part. !This document is not applicable to the roller coating m

37、achines which are manufactured before the date of its publication as EN.“ This standard does not establish any requirements for electromagnetic disturbances. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to

38、the type of machine or equipment covered by this European Standard. The present standard does not necessarily comply with Directive 94/9/EC. Additional safety requirements in a future revision of this standard can be necessary to satisfy Directive 94/9/EC. 2 Normative references !The following refer

39、enced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.“ !deleted text“ !EN 349“, Safety of machinery Minimum gaps to avoid

40、crushing of parts of the human body !EN 388, Protective gloves against mechanical risks“ !deleted text“ DIN EN 13113:2011-05 EN 13113:2002+A1:2010 (E) 6 !EN 953:1997+A1:2009“, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ !

41、EN 982:1996+A1:2008“, Safety of machinery Safety requirements for fluid power systems and their components Hydraulics !EN 983:1996+A1:2008“, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics !EN 999“, Safety of machinery The positioning of protective equ

42、ipment in respect of approach speeds of parts of the human body EN 1037, Safety of machinery Prevention of unexpected start-up !deleted text“ !EN 1088:1995+A2:2008“, Safety of machinery Interlocking devices associated with guards Principles for design and selection !EN 1760-2:2001+A1:2009“, Safety o

43、f machinery Pressure sensitive protective devices Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars EN ISO 3743-1, Acoustics Determination of sound power levels of noise sources Engineering methods for small, movable sources in reverberant

44、fields Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) EN ISO 3743-2, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering methods for small, movable sources in reverberant fields Part 2: Methods for special reverberation test rooms (

45、ISO 3743-2:1994) EN ISO 3744, Acoustics Determination of sound power levels of noise sources using sound pressure Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 3746, !Acoustics Determination of sound power levels of noise sources using sound pressure

46、Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995)“ EN ISO 3747, !Acoustics Determination of sound power levels of noise sources using sound pressure Comparison method in situ (ISO 3747:2000)“ EN ISO 4871, Acoustics Declaration and ver

47、ification of noise emission values of machinery and equipment (ISO 4871:1996) EN ISO 9614-1, !Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points (ISO 9614-1:1993)“ EN ISO 9614-2, !Acoustics Determination of sound power levels o

48、f noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996)“ !EN ISO 9614-3, Acoustics Determination of sound power levels of noise sources using sound intensity Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)“ EN ISO 11201, !Acoustics Noise emitted by machinery and equipment Determination of emi