DIN EN 13162-2015 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification German version EN 13162 2012+A1 2015《建筑物隔热产品 工厂制矿棉(MW)制品 规格 德文.pdf

1、April 2015Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9

2、1.100.60!%B3n“2311675www.din.deDDIN EN 13162Thermal insulation products for buildings Factory made mineral wool (MW) products Specification;English version EN 13162:2012+A1:2015,English translation of DIN EN 13162:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Mineralwolle (MW) Spe

3、zifikation;Englische Fassung EN 13162:2012+A1:2015,Englische bersetzung von DIN EN 13162:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en laine minrale (MW) Spcification;Version anglaise EN 13162:2012+A1:2015,Traduction anglaise de DIN EN 13162:2015-04SupersedesDIN EN 1316

4、2:2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 49 pages03.15 DIN EN 13162:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-04-01. I

5、t should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of

6、this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13162:2013-03, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official

7、Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13162:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved i

8、n its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This standard includes

9、 Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13162:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or altered by amendment is i

10、ndicated in the text by tags ! and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13162:2013-03 as follows: a) an addition to the Foreword has been introduced; b) Subclaus

11、e 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.10.2 “Thickness dL” has been amended; d) Subclause 4.3.13 “Release of dangerous substances” has been added; e) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; f) Clause 8 “

12、Marking and labelling” has been modified; g) Annex B “Product type determination (PTD) and factory production control (FPC)” has been modified; h) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN 1

13、8165: 1957-08, 1963-03 DIN 18165-1: 1975-01, 1987-03, 1991-07 DIN EN 13162: 2001-10, 2009-02, 2013-03 DIN EN 13162 Corrigendum 1: 2006-06 EN 13162:2012+A1 February 2015 ICS 91.100.60 Supersedes EN 13162:2012English Version Thermal insulation products for buildings - Factory made mineral wool (MW) pr

14、oducts - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en laine minrale (MW) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amen

15、dment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

16、 such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

17、 own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German

18、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploi

19、tation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13162:2012+A1:2015 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13162:2012+A1:2015 (E) 2 Contents Page

20、Foreword 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms .8 4 Requirements 11 5 Test methods . 18 6 Designation code 20 7 Assessment and Verification of the Constancy of Performance (AVCP) . 21 8 Marking and labelling . 22 Annex A (normative) Determina

21、tion of the declared values of thermal resistance and thermal conductivity . 23 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC) . 26 Annex C (normative) MW multi-layered insulation products . 31 Annex D (informative) Examples for the determination of the

22、 declared values of thermal resistance and thermal conductivity for a product or a product group 33 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 36 Bibliography . 47 Tables Table 1 Level and classes for thickness tol

23、erances 12 Table 2 Dimensional stability under specified temperature and humidity conditions 14 Table 3 Classes for thickness tolerances . 16 Table 4 Levels for compressibility 16 Table 5 Test methods, test specimens and conditions. 19 Table A.1 Values for k for one sided 90 % tolerance interval wit

24、h a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 28 Table D.1 test results . 33 Table D.2 R test results . 34 Table ZA.1 Relevant clauses f

25、or factory made mineral wool and intended use 36 Table ZA.2 Systems of AVCP . 38 Table ZA.3.1 Assignment of AVCP tasks for factory made mineral wool products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 38 Table ZA.3.2 Assignment of AVCP tasks for factory made mineral wool pro

26、ducts under system 3 (see Table ZA.2) . 40 DIN EN 13162:2015-04EN 13162:2012+A1:2015 (E) 3 Table ZA.3.3 Assignment of AVCP tasks for factory made mineral wool products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 41 Figures Figure ZA.1 Example CE marking information of

27、products under AVCP system 1 and system 3“ . 46 DIN EN 13162:2015-04EN 13162:2012+A1:2015 (E) 4 Foreword This document (EN 13162:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standa

28、rd shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of th

29、is document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential req

30、uirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is

31、indicated in the text by tags !“. This document supersedes !EN 13162:2012“. Compared with EN 13162:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on mu

32、lti-layered products; c) changes of some editorial and technical content and addition of information on some specific items such as for MW: lamella, compressibility; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factor

33、y made products; e) changes to Annex ZA. !Amendment 1 modifies EN 13162:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an additio

34、n in 3.2; h) an addition in 4.3.10.2; i) a new subclause 4.3.13; j) modification of Clause 7; k) modification of Clause 8; DIN EN 13162:2015-04EN 13162:2012+A1:2015 (E) 5 l) modification of Annex B; m) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products use

35、d in buildings but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for th

36、e specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyre

37、ne (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation pr

38、oducts for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, The

39、rmal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) prod

40、ucts Specification The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizati

41、ons of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

42、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13162:2015-04EN 13162:2012+A1:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made mineral wool products, with or without facings o

43、r coatings, which are used for the thermal insulation of buildings. The products are manufactured in the mat blankets, boards or slabs. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these pro

44、ducts is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a partic

45、ular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this standard. This sta

46、ndard does not cover in situ insulation products (covered by EN 14064 parts 1 and 2) and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14303). 2 Normative references The following documents, in whole or in part, are normatively refe

47、renced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determinati

48、on of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Th

49、ermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for