1、February 2017 English price group 23No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%auh“2628269www.din.d
2、eDIN EN 13163Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification;English version EN 13163:2012+A2:2016,English translation of DIN EN 13163:2017-02Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) Spezifikation
3、;Englische Fassung EN 13163:2012+A2:2016,Englische bersetzung von DIN EN 13163:2017-02Produits isolants thermiques pour le btiment Produits manufacturs en polystyrne expans (EPS) Spcification;Version anglaise EN 13163:2012+A2:2016,Traduction anglaise de DIN EN 13163:2017-02SupersedesDIN EN 13163:201
4、608See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 67 pages 02.17 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2017
5、-02-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information,
6、users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13163:2016-08, may be used in parallel with this standard during a specified transition period where such has been laid down in the
7、Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13163:2012+A2:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body i
8、nvolved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmmstoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). Amendments This st
9、andard differs from DIN EN 13163:2016-08 as follows: a) dimensions have been adjusted; b) several clauses have been modified; c) a symbol has been added. Previous editions DIN 18164: 1963-01, 1966-08 DIN 18164-1: 1972-12, 1979-06, 1991-12, 1992-08 DIN EN 13163: 2001-10, 2009-02, 2013-03, 2015-04, 20
10、16-08 DIN EN 13163 Corrigendum 1: 2006-06 DIN EN 13163:2017-02 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13163:2012+A2 November 2016 ICS 91.100.60 Supersedes EN 13163:2012+A1:2015 English Version Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products
11、- Specification Produits isolants thermiques pour le btiment - Produits manufacturs en polystyrne expans (EPS) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and inc
12、ludes Amendment 1 approved by CEN on 15 December 2014 and Amendment 2 approved by CEN on 11 July 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
13、Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra
14、nslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finl
15、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATI
16、ON COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13163:2012+A2:2016 E EN 13163:2012+A2:2016 (E) 2
17、 Contents Page European foreword . 6 1 Scope 9 2 Normative references 9 3 Terms, definitions, symbols, units and abbreviated terms 11 3.1 Terms and definitions 11 3.2 Symbols, units and abbreviated terms . 12 4 Requirements 15 4.1 General . 15 4.2 For all applications 16 4.2.1 Thermal resistance and
18、 thermal conductivity 16 4.2.2 Length and width 16 4.2.3 Thickness 16 4.2.4 Squareness 16 4.2.5 Flatness 17 4.2.6 Reaction to fire of the product as placed on the market 17 4.2.7 Durability characteristics . 17 4.3 For specific applications 18 4.3.1 General . 18 4.3.2 Dimensional stability 18 4.3.3
19、Squareness 19 4.3.4 Compressive stress at 10 % deformation 19 4.3.5 Bending strength 19 4.3.6 Tensile strength perpendicular to faces 20 4.3.7 Deformation under specified compressive load and temperature conditions . 20 4.3.8 Compressive creep. 21 4.3.9 Shear behaviour 21 4.3.10 Cyclic loading behav
20、iour . 22 4.3.11 Water absorption . 22 4.3.12 Freeze-thaw resistance 22 4.3.13 Water vapour transmission 23 4.3.14 Dynamic stiffness . 23 4.3.15 Compressibility (only applicable on EPS T products) 23 4.3.16 Apparent density 25 4.3.17 Reaction to fire of the product in standardised assemblies simulat
21、ing end-use applications 25 4.3.18 Continuous glowing combustion 25 4.3.19 Release of dangerous substances . 25 5 Test methods . 25 5.1 Sampling 25 5.2 Conditioning . 25 5.3 Testing 26 5.3.1 General . 26 5.3.2 Thermal resistance and thermal conductivity 26 6 Designation code 28 DIN EN 13163:2017-02
22、EN 13163:2012+A2:2016 (E) 37 Assessment and Verification of the Constancy of Performance (AVCP) . 30 7.1 General . 30 7.2 Product Type Determination (PTD) 30 7.3 Factory Production Control (FPC) 30 8 Marking and labelling . 30 Annex A (normative) Determination of the declared values of thermal resis
23、tance and thermal conductivity . 32 A.1 General . 32 A.2 Input data 32 A.3 Declared values . 32 A.3.1 General . 32 A.3.2 Case where thermal resistance and thermal conductivity are declared 32 A.3.3 Case where thermal resistance is declared . 33 Annex B (normative) !Product type determination“ (!PTD“
24、) and factory production control (FPC) . 34 B.1 !Product type determination“ and factory production control . 34 B.2 Indirect testing for factory production control . 39 B.2.1 General . 39 B.2.2 Compressive stress at 10 % deformation 39 B.2.3 Thermal conductivity 40 B.2.4 Thickness effect . 41 B.2.5
25、 Dynamic stiffness 41 Annex C (normative) Product classification . 42 Annex D (normative) Multi layered EPS products . 44 D.1 General . 44 D.2 Requirements . 44 D.2.1 For all applications. 44 D.2.2 For specific applications 45 D.3 Test methods 45 D.4 Evaluation of conformity . 45 Annex E (informativ
26、e) Verification of the reaction to fire classification of raw materials . 46 E.1 General . 46 E.2 Material covered by this annex . 46 E.3 Preparation of samples 46 E.4 !Product type determination“ for EPS raw material 46 E.5 Factory Production Control for EPS raw material 47 E.5.1 General . 47 E.5.2
27、 Testing frequency . 47 E.6 Certification of conformity for EPS raw material 47 E.6.1 Bodies involved in the evaluation of conformity procedure 47 E.6.2 Test specimens 47 E.6.3 !Product type determination“ 47 E.7 Continuous surveillance of EPS raw material 48 E.7.1 Production . 48 E.7.2 Factory prod
28、uction control . 48 E.8 Material certificate for EPS raw material. 48 E.9 Requirement for raw material supply 49 E.9.1 Declaration for the raw material supply 49 E.9.2 Labelling. 49 Annex F (informative) Additional properties 50 DIN EN 13163:2017-02 EN 13163:2012+A2:2016 (E) 4 F.1 General . 50 F.2 L
29、ong-term compressive behaviour 50 F.3 Shear behaviour 50 F.4 Water vapour diffusion resistance factor . 51 F.5 Examples of determination of thermal conductivity 52 F.6 Additional information 53 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction
30、 Products Regulation“ 54 Bibliography . 65 Tables Table 1 Classes of dimensional tolerances 17 Table 2 Dimensional stability under specified temperature or specified temperature and humidity conditions 18 Table 3 Levels for compressive stress at 10 % deformation. 19 Table 4 Levels for bending streng
31、th . 20 Table 5 Levels of deformation under specified compressive load and temperature conditions . 21 Table 6 Levels for dynamic stiffness 23 Table 7 Classes for thickness tolerances 24 Table 8 Levels for compressibility 24 Table 9 Test methods, test specimens and conditions 27 Table A.1 Values for
32、 k for one sided 90 % tolerance interval with a confidence level of 90 % 33 Table B.1 Number of tests for !PTD“ and minimum product testing frequencies . 34 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 37 Table C.1 Classification of EPS products . 42 Table C
33、.2 Classification EPS products with acoustical properties . 43 Table E.1 Testing frequency of raw material 48 Table F.1 Correlation between bending strength and shear strength . 51 Table F.2 Tabulated values of water vapour diffusion resistance index and water vapour permeability . 52 Table ZA.1 Rel
34、evant clauses for factory made expanded polystyrene and intended use . 55 Table ZA.2 Systems of AVCP 56 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded polystyrene products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 57 Table ZA.3.2 Assignment of AVCP tasks fo
35、r factory made expanded polystyrene products under system 3 (see Table ZA.2) 58 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded polystyrene products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 59 DIN EN 13163:2017-02 EN 13163:2012+A2:2016 (E) 5Figures
36、 Figure B.1 Relationship between compressive stress at 10 % deformation and apparent density for indirect testing 40 Figure F.1 Example of a relationship between thermal conductivity (at 50 mm reference thickness and 10 C mean temperature) apparent density for indirect testing of non infrared absorb
37、ing EPS . 53 Figure ZA.1 #Example CE marking information$ . 64 DIN EN 13163:2017-02 EN 13163:2012+A2:2016 (E) 6 European foreword This document (EN 13163:2012+A2:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by
38、DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by August 2018. Attention is drawn to the possibility that some o
39、f the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and su
40、pports essential requirements of #the EU Construction Products Regulation (CPR)$. !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ This document includes Amendment 1, approved by CEN on 2014-12-15 and Amendment 2
41、, approved by CEN on 2016-07-11. This document supersedes #EN 13163:2012+A1:2015$. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“ and #$. The main changes #brought by EN 13163:2012 to the 2008 edition were$: a) better harmonisation between the ind
42、ividual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new annex on multi-layered products; c) new annex on voluntary verification of the reaction to fire classification of raw materials; d) changes on some editorial and technical content and add
43、ition of information on some specific items such as for EPS dimensional stability, compressibility; e) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; f) changes to the Annex ZA. !Amendment 1 modifies
44、 EN 13163:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces g) an addition to the foreword; DIN EN 13163:2017-02 EN 13163:2012+A2:2016 (E) 7h) an addition in 3.2; i) a
45、 new subclause 4.3.19; j) modification of Clause 7; k) modification of Clause 8; l) modification of Annex B; m) modification of Annex E; n) a new Annex ZA.“ #The main changes brought by the 2ndamendment to EN 13163:2012+A1:2015 are: p) the adjustment of dimensions; q) the modification of several cla
46、uses; r) the addition of a symbol.$ This standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed be
47、low as a European package of standards. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory ma
48、de mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal ins
49、ulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) pr
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1