DIN EN 13164-2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification German version EN 13164 2012+A1 2015《建筑用隔热产品 工厂制.pdf

1、April 2015Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 9

2、1.100.60!%B3Y“2311654www.din.deDDIN EN 13164Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification;English version EN 13164:2012+A1:2015,English translation of DIN EN 13164:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus extrudi

3、ertem Polystyrolschaum (XPS) Spezifikation;Englische Fassung EN 13164:2012+A1:2015,Englische bersetzung von DIN EN 13164:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en mousse de polystyrne extrud (XPS) Spcification;Version anglaise EN 13164:2012+A1:2015,Traduction anglai

4、se de DIN EN 13164:2015-04SupersedesDIN EN 13164:2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 52 pages03.15 DIN EN 13164:2015-042 A comma is used as the decimal marker. Start of application The start of

5、 application of this standard is 2015-04-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date giv

6、en therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13164:2013-03, may be used in parallel with this standard during a specified transition period

7、where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13164:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Ge

8、rmany). The responsible German body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO

9、/TC 163/SC 1 und SC 3). This standard includes Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13164:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish o

10、f text introduced or altered by amendment is indicated in the text by tags ! and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13164:2013-03 as follows: a) an addition to

11、 the Foreword has been introduced; b) Subclause 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.10 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking a

12、nd labelling” has been modified; f) Annex B “Product type determination (PTD) and factory production control (FPC)” has been modified; g) Annex E “Additional characteristics” has been modified; h) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products R

13、egulation” has been added. Previous editions DIN 18164: 1963-01, 1966-08 DIN 18164-1: 1972-12, 1979-06, 1991-12, 1992-08 DIN EN 13164: 2001-10, 2009-02, 2013-03 DIN EN 13164/A1: 2004-08 DIN EN 13164 Corrigendum 1: 2006-06 EN 13164:2012+A1February 2015 ICS 91.100.60 Supersedes EN 13164:2012English Ve

14、rsion Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus

15、extrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

16、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official version

17、s (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Be

18、lgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Swit

19、zerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13164:2012+A1:2015 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NO

20、RMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13164:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units, abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols, units and abbreviated t

21、erms 9 4 Requirements 11 4.1 General . 11 4.2 For all applications . 12 4.2.1 Thermal resistance and thermal conductivity . 12 4.2.2 Length, width, squareness, flatness . 12 4.2.3 Thickness 13 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3

22、For specific applications 14 4.3.1 General . 14 4.3.2 Dimensional stability under specified conditions . 14 4.3.3 Deformation under specified compressive load and temperature conditions . 14 4.3.4 Compressive stress or compressive strength 15 4.3.5 Tensile strength perpendicular to faces 15 4.3.6 Co

23、mpressive creep . 16 4.3.7 Water absorption 16 4.3.8 Freeze-thaw resistance 17 4.3.9 Water vapour transmission . 17 4.3.10 Release of dangerous substances 18 4.3.11 Reaction to fire of the product in standardized assemblies simulating end-use applications . 18 4.3.12 Continuous glowing combustion 18

24、 4.3.13 Shear strength . 18 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Testing . 19 5.3.1 General . 19 5.3.2 Thermal resistance and thermal conductivity . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product

25、Type Determination (PTD) . 22 7.3 Factory Production Control (FPC) 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 DIN EN 13164:2015-04EN 13164:2012+A1:2015 (E) 3 A.3 Dec

26、lared values . 24 A.3.1 General . 24 A.3.2 Case where thermal resistance and thermal conductivity are declared . 24 A.3.3 Case where only thermal resistance is declared . 25 Annex B (normative) !Product type determination“ (!PTD“) and Factory production control (FPC) 26 Annex C (normative) Determina

27、tion of the aged values of thermal resistance and thermal conductivity . 30 C.1 General . 30 C.2 Procedure for XPS foam without diffusion tight facings 30 C.2.1 Principle 30 C.2.2 Sample preparation . 30 C.2.3 Procedure . 30 C.3 Procedure for XPS foam for use with diffusion tight facing on both side

28、s 31 C.3.1 Principle 31 C.3.2 Ageing procedure 31 C.4 Determination of value after ageing: “aged value” 31 C.4.1 Determination of aged value for XPS products without diffusion tight facings on both sides 31 C.4.2 Determination of aged value for XPS products for use with diffusion tight facing on bot

29、h sides 32 C.5 Blowing agent 33 C.6 Product grouping 33 Annex D (normative) XPS multi-layered insulation products 34 D.1 General . 34 D.2 Requirements . 34 D.2.1 For all applications 34 D.2.2 For specific applications 35 D.3 Test methods . 35 D.4 Evaluation of conformity 35 Annex E (informative) Add

30、itional properties 36 E.1 General . 36 E.2 Behaviour under cyclic loading . 36 E.3 Compressive modulus of elasticity . 36 E.4 Bending strength . 36 E.5 Determination of volume percentage of closed cells 36 Annex F (informative) Plan for cutting test specimen . 38 Annex ZA (informative) !Clauses of t

31、his European Standard addressing the provisions of the EU Construction Products Regulation“ 40 ZA.1 Scope and relevant characteristics . 40 DIN EN 13164:2015-04EN 13164:2012+A1:2015 (E) 4 ZA.2 Procedures for AVCP of factory made extruded polystyrene products . 41 ZA.2.1 Systems of AVCP 41 ZA.2.2 Dec

32、laration of Performance (DoP) 45 ZA.3 CE Marking and labelling . 48 Bibliography . 50 Tables Table 1 Tolerances of length, width, squareness and flatness 13 Table 2 Classes for thickness tolerances . 13 Table 3 Dimensional stability under specified conditions 14 Table 4 Levels for deformation under

33、specified compressive load and temperature conditions 15 Table 5 Levels for compressive stress or compressive strength 15 Table 6 Levels for tensile strength, perpendicular to faces . 16 Table 7 Levels for long term water absorption by total immersion . 16 Table 8 Levels for long term water absorpti

34、on by diffusion . 17 Table 9 Test methods, test specimens and conditions. 19 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies . 26 Table B.2 Minimum product testing fr

35、equencies for the reaction to fire characteristics . 28 Table E.1 Test methods, test specimens, conditions and minimum testing frequencies . 37 Table ZA.1 Relevant clauses for factory made extruded polystyrene foam and intended use 40 Table ZA.2 Systems of AVCP . 42 Table ZA.3.1 Assignment of AVCP t

36、asks for factory made extruded polystyrene foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 42 Table ZA.3.2 Assignment of AVCP tasks for factory made extruded polystyrene foam products under system 3 (see Table ZA.2) . 44 Table ZA.3.3 Assignment of AVCP tasks for fac

37、tory made extruded polystyrene foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 44 Figures Figure ZA.1 Example CE marking information of products under AVCP system 3“ . 49 DIN EN 13164:2015-04EN 13164:2012+A1:2015 (E) 5 Foreword This document (EN 13164:2012+

38、A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Au

39、gust 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pate

40、nt rights. This document supersedes !EN 13164:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prepared under a mandate given to CEN by the European Com

41、mission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13164:2008, the main changes are: a) bett

42、er harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes of some editorial and technical content and addition of information on some specific items such as fo

43、r XPS: Annex C; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13164:2012 identifying those clauses of the standard which are needed for the co

44、mpliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.10; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; DIN EN 13164:2015-04EN

45、13164:2012+A1:2015 (E) 6 l) modification of Annex E; m) a new Annex ZA.“ This European Standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88

46、have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products; all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulat

47、ion products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) product

48、s Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory

49、made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insul