DIN EN 13166-2016 en 4796 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification German version EN 13166 2012+A2 2016《建筑物隔热产品 酚醛泡沫的工厂制.pdf

1、September 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%T+“2564908www.din.d

2、eDIN EN 13166Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification;English version EN 13166:2012+A2:2016,English translation of DIN EN 13166:2016-09Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Phenolharzschaum (PF) Spezifikation;Englische Fassu

3、ng EN 13166:2012+A2:2016,Englische bersetzung von DIN EN 13166:2016-09Produits isolants thermiques pour le btiment Produits manufacturs en mousse phnolique (PF) Spcification;Version anglaise EN 13166:2012+A2:2016,Traduction anglaise de DIN EN 13166:2016-09SupersedesDIN EN 13166:201504See start of ap

4、plicationwww.beuth.deDocument comprises 51 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.09.16 DIN EN 13166:2016-09 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 20

5、16-09-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information

6、, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13166:2015-04, may be used in parallel with this standard during a specified transition period where such has been laid down in th

7、e Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13166:2012+A2:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body

8、 involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmmstoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC 3). This document is

9、 part of a package of interrelated standards for the specification of factory made thermal insulation products. There is no DIN Standard available which corresponds to the International Standard referred to in this document. Amendments This standard differs from DIN EN 13166:2015-04 as follows: a) a

10、 further blowing agent has been introduced in Annex C. Previous editions DIN 18164: 1963-01, 1966-08 DIN 18164-1: 1972-12, 1979-06, 1991-12, 1992-08 DIN EN 13166: 2001-10, 2009-02, 2013-03, 2015-04 DIN EN 13166/A1: 2004-08 DIN EN 13166 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPIS

11、CHE NORM EN 13166:2012+A2 June 2016 ICS 91.100.60 Supersedes EN 13166:2012+A1:2015 English Version Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en mousse phnolique (PF) - Spcif

12、ication Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Phenolharzschaum (PF) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014 and Amendment 2 approved by CEN on 23 February 2016. CEN members are bou

13、nd to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the C

14、EN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre

15、has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

16、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 B

17、russels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13166:2012+A2:2016 E EN 13166:2012+A2:2016 (E) 2 Contents Page European foreword . 4 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviat

18、ed terms . 9 4 Requirements 12 5 Test methods . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 8 Marking and labelling . 22 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 2

19、4 A.2 Input data 24 A.3 Declared values . 24 Annex B (normative) !Product type determination“ (!PTD“) and factory production control (FPC). 26 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity 30 C.1 General . 30 C.2 Preparation of test sample . 31 C

20、.3 Determination of the initial value of thermal conductivity 31 C.4 Determination of the aged value of thermal conductivity 31 C.5 Blowing agent 33 C.6 Declaration of thermal resistance and thermal conductivity 34 Annex D (informative) Additional properties . 35 D.1 General . 35 D.2 Shear strength

21、. 35 D.3 Cell gas composition 35 Annex E (normative) PF multi-layered thermal insulation products 36 E.1 General . 36 E.2 Requirements 36 E.3 Test methods . 37 E.4 Evaluation of conformity . 37 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction

22、 Products Regulation“. 38 Bibliography . 49 Tables Table 1 Tolerances for length and width 13 DIN EN 13166:2016-09EN 13166:2012+A2:2016 (E) 3 Table 2 Classes for thickness tolerances . 13 Table 3 Tolerances for deviation from flatness 14 Table 4 Dimensional stability under specified temperature and

23、humidity conditions. 15 Table 5 Levels for compressive strength 16 Table 6 Levels for tensile strength perpendicular to faces 16 Table 7 Levels for short term water absorption by partial immersion . 17 Table 8 Levels for long term water absorption by partial immersion . 17 Table 9 Test methods, spec

24、imens and conditions . 20 Table A.1 Values for k for one side 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies 26 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 2

25、8 Table C.1 Test times for product thicknesses 32 Table C.2 Increments to be added to accelerated aged values of thermal conductivity to obtain the time averaged value over 25 years (W/mK) 33 Table D.1 Test methods, test specimens, conditions and minimum testing frequencies 35 Table ZA.1 Relevant cl

26、auses for factory made phenolic foam and intended use . 39 Table ZA.2 Systems of AVCP . 40 Table ZA.3.1 Assignment of AVCP tasks for factory made phenolic foam products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 41 Table ZA.3.2 Assignment of AVCP tasks for factory made pheno

27、lic foam products under system 3 (see Table ZA.2) 42 Table ZA.3.3 Assignment of AVCP tasks for factory made phenolic foam products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) 43 Figures Figure ZA.1 !Example CE marking information of products under AVCP system 1 and sys

28、tem 3“ . 48 DIN EN 13166:2016-09EN 13166:2012+A2:2016 (E) 4 European foreword This document (EN 13166:2012+A2:2016) has been prepared by Technical Committee CEN/TC 88 “Thermal insulation materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the statu

29、s of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by March 2018. Attention is drawn to the possibility that some of the elements of this document may be the subje

30、ct of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1 approved by CEN on 2014-12-15, and Amendment 2, approved by CEN on 2016-02-23. This document supersedes #EN 13166:2012+A1:2015$. The start and finis

31、h of text introduced or altered by amendment is indicated in the text by tags !“ and #$. This standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU

32、Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compared with EN 13166:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and l

33、evels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content. This includes the limiting of the use of the slicing method for ageing in Annex C to unfaced and open-faced products and the clearer definition of how the ageing techniques should be applied

34、to various types of PF products; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. !Amendment 1 modifies EN 13166:2012 identifying those clauses of the standard which are

35、needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) replacement and additions in 3.2; DIN EN 13166:2016-09EN 13166:2012+A2:2016 (E) 5 h) a new subclause 4.3.11; i) modification of Clause 7; j

36、) modification of Clause 8; k) modification of Annex B; l) modification of Table D.1; m) a new Annex ZA.“ #Compared with EN 13166:2012+A1:2015 the main changes are: introducing a further blowing agent (HFO) 1233zd(E) and 1233zd(E) mixtures with LBL2 and/or pentanes in Annex C of this standard.$ This

37、 standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The packag

38、e of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 131

39、63, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid

40、polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products f

41、or buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB products) Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification DIN EN 1

42、3166:2016-09EN 13166:2012+A2:2016 (E) 6 EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life of thermal insulation products exceeds by far the energy used and emissions ma

43、de during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, F

44、ormer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13166:2016-09EN 13166:2012+A2:2

45、016 (E) 7 1 Scope This European Standard specifies the requirements for factory made phenolic foam products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards and laminates. Products covered by this standa

46、rd are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standa

47、rd does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance

48、lower than 0,40 m2K/W or a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This standard does not cover in-situ thermal insulation products, products intended to be used for the thermal insulation of building equipment and industrial installations (c

49、overed by EN 14314 3). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for