DIN EN 13169-2015 Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification German version EN 13169 2012+A1 2015《建筑物用隔热产品 工厂制膨胀.pdf

1、April 2015 Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、91.100.60!%B3s“2311680www.din.deDDIN EN 13169Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification;English version EN 13169:2012+A1:2015,English translation of DIN EN 13169:2015-04Wrmedmmstoffe fr Gebude Werkmig hergestellte Produkte aus Blhperlit

3、 (EPB) Spezifikation;Englische Fassung EN 13169:2012+A1:2015,Englische bersetzung von DIN EN 13169:2015-04Produits isolants thermiques pour le btiment Produits manufacturs en panneaux de perlite expanse (EPB) Spcification;Version anglaise EN 13169:2012+A1:2015,Traduction anglaise de DIN EN 13169:201

4、5-04SupersedesDIN EN 13169:2013-03See start of applicationwww.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 57 pages 03.15 DIN EN 13169:2015-04 2 A comma is used as the decimal marker. Start of application The start of application of this

5、 standard is 2015-04-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For furt

6、her information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13169:2013-03, may be used in parallel with this standard during a specified transition period where such has been

7、laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13169:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsi

8、ble German body involved in its preparation was the DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-60 AA Wrmedmm-stoffe (SpA zu CEN/TC 88 und WG 1 bis 9, WG 12 bis 21, ISO/TC 61/SC 10, ISO/TC 163 (teilweise), ISO/TC 163/SC 1 und SC

9、3). This standard includes Amendment A1 approved by CEN on 2014-12-15. Amendment 1 modifies EN 13169:2012 identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The start and finish of text introduced or

10、 altered by amendment is indicated in the text by tags !and “. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN EN 13169:2013-03 as follows: a) an addition to the Foreword has bee

11、n introduced; b) Subclause 3.2 “Symbols, units and abbreviated terms” has been amended; c) Subclause 4.3.11 “Release of dangerous substances” has been added; d) Clause 7 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; e) Clause 8 “Marking and labelling” has bee

12、n modified; f) Annex B “Product type determination (PTD) and factory production control (FPC)” has been modified; g) Subclause D.4 “Assessment and Verification of the Constancy of Performance (AVCP)” has been revised; h) Annex E “Composite insulation boards” has been modified; i) Annex ZA “Clauses o

13、f this European Standard addressing the provisions of the EU Construction Products Regulation” has been added. Previous editions DIN EN 13169: 2001-10, 2009-02, 2013-03 DIN EN 13169/A1: 2004-08 DIN EN 13169 Corrigendum 1: 2006-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13169:2012+A1 Feb

14、ruary 2015 ICS 91.100.60 Supersedes EN 13169:2012English Version Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification Produits isolants thermiques pour le btiment - Produits manufacturs en panneaux de perlite expanse (EPB) - Spcification Wrme

15、dmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Blhperlit (EPB) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

16、 the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Stand

17、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the nati

18、onal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slo

19、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any mea

20、ns reserved worldwide for CEN national Members. Ref. No. EN 13169:2012+A1:2015 EEN 13169:2012+A1:2015 (E) 2 Contents Page Foreword 5 1 Scope 7 2 Normative references 7 3 Terms, definitions, symbols, units and abbreviated terms .8 3.1 Terms and definitions .8 3.2 Symbols units and abbreviated terms .

21、9 4 Requirements 12 4.1 General . 12 4.2 For all applications . 12 4.3 For specific applications 14 5 Test methods . 18 5.1 Sampling 18 5.2 Conditioning 18 5.3 Testing . 19 6 Designation code 21 7 Assessment and Verification of the Constancy of Performance (AVCP) . 22 7.1 General . 22 7.2 Product Ty

22、pe Determination (PTD) . 22 7.3 Factory Production Control (FPC) 23 8 Marking and labelling . 23 Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 A.3 Declared values. 24 Annex B (normative) !Product type

23、 determination“ (!PTD“) and factory production control (FPC) . 27 Annex C (normative) Determination of the thermal conductivity in relation to moisture content 31 Annex D (normative) EPB multi-layered insulation products . 33 D.1 General . 33 D.2 Requirements 33 D.3 Test methods . 34 D.4 !Assessment

24、 and Verification of the Constancy of Performance (AVCP)“ 34 Annex E (normative) Composite insulation boards . 35 E.1 Description 35 E.2 Requirements 35 E.3 Test methods . 38 E.4 Designation code 38 DINEN 13169:2015-04EN 13169:2012+A1:2015 (E) 3 E.5 Factory production control. 38 E.6 !Assessment and

25、 Verification of the Constancy of Performance (AVCP)“ . 40 E.7 Marking and labelling 40 Annex F (informative) Additional properties 41 F.1 General . 41 F.2 Particular profiles 42 Annex ZA (informative) !Clauses of this European Standard addressing the provisions of the EU Construction Products Regul

26、ation“ 43 ZA.1 Scope and relevant characteristics . 43 ZA.2 Procedures for AVCP of factory made expanded perlite products 46 ZA.3 CE Marking and labelling 52 Bibliography 55 Tables Table 1 Thickness tolerances . 13 Table 2 Dimensional stability under specified temperature and humidity conditions . 1

27、5 Table 3 Levels for compressive stress or compressive strength. 15 Table 4 Levels for deformation under specified compressive load and temperature 16 Table 5 Levels for water absorption by total immersion . 16 Table 6 Levels for bending strength at constant span 17 Table 7 Test methods, test specim

28、ens and conditions . 20 Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % 25 Table B.1 Minimum number of tests for !PTD“ and minimum product testing frequencies 27 Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 29 Tab

29、le E.1 Classes for thickness tolerances 36 Table E.2 Levels of compressibility . 36 Table E.3 Test methods, test specimens and conditions 38 Table E.4 Minimum number or frequencies of product testing 39 Table F.1 Test methods, test specimens, conditions and testing frequencies . 42 Table ZA.1.1 Rele

30、vant clauses for factory made expanded perlite board and intended use 44 Table ZA.1.2 Relevant clauses for factory made expanded perlite board (composites EPB) and intended use 45 Table ZA.2 Systems of AVCP . 46 Table ZA.3.1 Assignment of AVCP tasks for factory made expanded perlite board products u

31、nder system 1 for reaction to fire and system 3 (see Table ZA.2) . 47 Table ZA.3.2 Assignment of AVCP tasks for factory made expanded perlite board products under system 3 (see Table ZA.2) . 48 Table ZA.3.3 Assignment of AVCP tasks for factory made expanded perlite board products under combined syst

32、em 4 for reaction to fire and system 3 (see Table ZA.2) . 49 DINEN 13169:2015-04EN 13169:2012+A1:2015 (E) 4 Figures Figure C.1 Example of a graphic representation of “a” 32 Figure ZA.1 Example CE marking information of products under AVCP system 1 and system 3 . 54 DIN EN 13169:2015-04 EN 13169:2012

33、+A1:2015 (E) 5 Foreword This document (EN 13169:2012+A1:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an

34、identical text or by endorsement, at the latest by August 2015, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be

35、held responsible for identifying any or all such patent rights. This document supersedes !EN 13169:2012“. This document includes Amendment 1 approved by CEN on 2014-12-15. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. This document has been prep

36、ared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Construction Products Regulation (CPR), see informative Annex ZA, which is an integral part of this standard.“ Compa

37、red with EN 13169:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes on some editorial and technical content and addi

38、tion of information on some specific items; d) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. !Amendment 1 modifies EN 13169:2012 identifying those clauses of the standard whi

39、ch are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). This amendment introduces f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.11; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B;

40、 DINEN 13169:2015-04EN 13169:2012+A1:2015 (E) 6 l) modification of D.4; m) modification of Annex E; n) a new Annex ZA.“ This standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Res

41、olution BT 20/1993 Revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope o

42、f CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made e

43、xtruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insu

44、lation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specific

45、ation EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions produced during the installed life o

46、f thermal insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Bel

47、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

48、erland, Turkey and the United Kingdom. DIN EN 13169:2015-04 EN 13169:2012+A1:2015 (E) 7 1 Scope This European Standard specifies the requirements for factory made expanded perlite board products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards, multi-layered insulation or composite insulation products. This standard also covers composite insulation