DIN EN 13252-2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems German version EN 13252 2016《土工织物及其相关产品 用于排水系统的土工织物及其相关产品要求的特性 .pdf

1、December 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.080.70!%o“2599176www.din.deD

2、IN EN 13252Geotextiles and geotextilerelated products Characteristics required for use in drainage systems;English version EN 13252:2016,English translation of DIN EN 13252:2016-12Geotextilien und geotextilverwandte Produkte Geforderte Eigenschaften fr die Anwendung in Drnanlagen;Englische Fassung E

3、N 13252:2016,Englische bersetzung von DIN EN 13252:2016-12Gotextiles et produits apparents Caractristiques requises pour lutilisation dans les systmes de drainage;Version anglaise EN 13252:2016,Traduction anglaise de DIN EN 13252:2016-12SupersedesDIN EN 13252:201507See start of applicationwww.beuth.

4、deDocument comprises 48 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.01.17 DIN EN 13252:2016-12 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should

5、 be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this sta

6、ndard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13252:2015-07, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal

7、of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13252:2016) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics” (Secretariat: NBN, Belgium). The responsible German body involved in its preparation was DIN-Normenausschuss T

8、extil und Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machinery) (Textilnorm), Working Committee NA 106-01-11 AA Geotextilien und Geokunststoffe. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 10390 DIN I

9、SO 10390 ISO/TS 13434 DIN EN ISO 13434 Amendments This standard differs from DIN EN 13252:2015-07 as follows: a) in 4.2), Table 1, all “H”-coded characteristics have been replaced by “A”. The characteristic “damage during installation” has been coded “S”, and a corresponding paragraph has been added

10、 in 4.3; b) in ZA.3, the example has been deleted. Previous editions DIN EN 13252: 2001-04, 2005-04, 2014-06, 2015-07 ) In the original European document, EN 13252, reference is erroneously made to 4.1 (see Annexes D and ZA). DIN EN 13252:2016-12 3 National Annex NA (informative) Bibliography DIN IS

11、O 10390, Soil quality Determination of pH DIN EN ISO 13434, Geotextiles and geotextile-related products Tear propagation tests DIN EN 13252:2016-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13252 October 2016 ICS 59.080.70 Supersedes EN 13252:2014+A1:201

12、5English Version Geotextiles and geotextile-related products - Characteristics required for use in drainage systems Gotextiles et produits apparents - Caractristiques requises pour lutilisation dans les systmes de drainage Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften fr di

13、e Anwendung in Drnanlagen This European Standard was approved by CEN on 4 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists a

14、nd bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the

15、 responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugosl

16、av Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE

17、 NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13252:2016 EEN 13252:2016 (E) 2 Contents Page European foreword . 4

18、 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4 Required characteristics and corresponding methods of test 8 4.1 General 8 4.2 Selection of the appropriate standard in a specific application 9 4.3 Cha

19、racteristics relevant to specific conditions of use (S-coded characteristics) 12 4.3.1 Tensile strength of seams and joints . 12 4.3.2 Strength of structural junctions - geocomposites 12 4.3.3 Static puncture 12 4.3.4 Friction characteristics 12 4.3.5 Compression strength under load . 12 4.3.6 Resis

20、tance to damage during installation . 12 4.3.7 Water flow capacity . 12 4.4 Release of dangerous substances . 12 5 Assessment and verification of constancy of performance (AVCP) . 13 5.1 General . 13 5.2 Presentation of characteristics . 13 5.3 Product type determination (PTD) 13 5.4 Factory product

21、ion control (FPC) 14 5.5 Verification of values 14 5.6 Initial inspection of factory and of FPC 14 5.7 Continuous surveillance of FPC . 15 6 Marking 15 Annex A (normative) Factory production control 16 A.1 Factory production control scheme 16 A.1.1 General . 16 A.1.2 Product design 16 A.1.3 Producti

22、on 16 A.1.4 Finished products 16 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) 17 A.2 Assessment of a factory production control (FPC) system 18 A.2.1 General . 18 A.2.2 Checklist 18 A.2.3 Test frequency . 22 Annex B (normative) Durability aspects 23 B.1 Genera

23、l . 23 B.1.1 Service life . 23 DIN EN 13252:2016-12EN 13252:2016 (E) 3 B.1.2 Initial and repeat testing of durability 23 B.1.3 Use of rework material . 24 B.2 Weathering (all products) . 24 B.3 Products used in non-reinforcing applications and with service lives up to 5 years 24 B.4 Other applicatio

24、ns and service lives up to 25 years, 50 years and 100 years 25 B.4.1 General . 25 B.4.2 Tests for specific materials . 25 Annex C (informative) Guidelines for the selection of the appropriate standard in a specific application 29 Annex D (informative) Significant technical changes to superseded vers

25、ions of this standard . 31 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 32 Bibliography . 44 DIN EN 13252:2016-12EN 13252:2016 (E) 4 European foreword This document (EN 13252:2016) has been prepared by Technical Commi

26、ttee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the l

27、atest by July 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13252:2014+A1:2015. This document has been prepared u

28、nder a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation No 305/2011. For relationship with Regulation (EU) Nr. 305/2011, see informative Annex ZA, which is an integral part of this document. Annex D provides

29、 details of significant technical changes between this European Standard and the previous editions. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, C

30、yprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Uni

31、ted Kingdom. DIN EN 13252:2016-12EN 13252:2016 (E) 5 Introduction This European Standard allows manufacturers to describe geotextiles and geotextile-related products on the basis of declared values for characteristics relevant to the intended use and if tested to the specified method. It also includ

32、es procedures for the assessment and verification of constancy of performance and factory production control. This European Standard may also be used by designers, end-users and other interested parties to define which functions and conditions of use are relevant. The term “product” used in this Eur

33、opean Standard refers to a geotextile or geotextile-related product. This European Standard is part of a series of standards, addressing the requirements for geotextiles and geotextile-related products when used in a specific application. Annex C provides guidance on how to select the appropriate st

34、andard. DIN EN 13252:2016-12EN 13252:2016 (E) 6 1 Scope This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in drainage systems and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or

35、geotextile-related products is to fulfil one or more of the following functions: filtration, separation and drainage. The separation function is always used in conjunction with filtration or drainage. Accordingly, separation will never be specified alone. This European Standard is not applicable to

36、geosynthetic barriers, as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. This European Standard defines requirements to be met by manufa

37、cturers and distributors with regard to the presentation of product properties. Particular application cases may contain requirements regarding additional properties and preferably standardized test methods, if they are technically relevant. This European Standard may be used to derive design values

38、 by taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure. 2 No

39、rmative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment

40、s) applies. EN 12224, Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12226, Geosynthetics - General tests for evaluation following durability testing EN 12447, Geotextiles and geotextile-related products - Screening test method for determining the resi

41、stance to hydrolysis in water EN ISO 1043-1, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696) EN ISO 9862, Geosynthetics - Sampling and prepara

42、tion of test specimens (ISO 9862) EN ISO 10318-1, Geosynthetics - Part 1: Terms and definitions (ISO 10318-1) EN ISO 10319, Geosynthetics - Wide-width tensile test (ISO 10319) EN ISO 10320, Geotextiles and geotextile-related products - Identification on site (ISO 10320) EN ISO 10321, Geosynthetics -

43、 Tensile test for joints/seams by wide-width strip method (ISO 10321) EN ISO 10722, Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722) DIN EN 13252:2016-12EN 13252:2016 (E) 7 EN ISO 11058, Geotextiles a

44、nd geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058) EN ISO 12236, Geosynthetics - Static puncture test (CBR test) (ISO 12236) EN ISO 12956, Geotextiles and geotextile-related products - Determination of the characteristic

45、 opening size (ISO 12956) EN ISO 12957-1, Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1) EN ISO 12957-2, Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2) EN ISO 12958, Geotextiles and geotextile

46、-related products - Determination of water flow capacity in their plane (ISO 12958) EN ISO 13426-1, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1) EN ISO 13426-2, Geotextiles and geotextile-related products - Strength of inter

47、nal structural junctions - Part 2: Geocomposites (ISO 13426-2) EN ISO 13433, Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433) EN ISO 13438, Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438) EN ISO 25619-1,

48、 Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1) EN ISO 25619-2, Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2) ISO 10390, Soil quality Determination of pH AS

49、TM D7409 15, Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns ASTM D4603 03(2011) e1, Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions of EN ISO 10318-1 and the following apply. 3.1.1 product geotextile or geotextile-rela