DIN EN 13254-2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams German version EN 13254 2016《土工织物及其相.pdf

1、December 2016 English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.080.70!%p“2599177www.din.deD

2、IN EN 13254Geotextiles and geotextilerelated products Characteristics required for the use in the construction of reservoirs and dams;English version EN 13254:2016,English translation of DIN EN 13254:2016-12Geotextilien und geotextilverwandte Produkte Geforderte Eigenschaften fr die Anwendung beim B

3、au von Rckhaltebecken und Staudmmen;Englische Fassung EN 13254:2016,Englische bersetzung von DIN EN 13254:2016-12Gotextiles et produits apparents Caractristiques requises pour lutilisation dans la construction de rservoirs et de barrages;Version anglaise EN 13254:2016,Traduction anglaise de DIN EN 1

4、3254:2016-12SupersedesDIN EN 13254:201507See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 48 pages 12.16 2A comma is used as the decimal marker. Start of application The start of

5、 application of this standard is 2016-12-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date giv

6、en therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13254:2015-07, may be used in parallel with this standard during a specified transition period

7、where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13254:2016) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics” (Secretariat: NBN, Belgium). The responsible German body

8、 involved in its preparation was DIN-Normenausschuss Textil und Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machinery) (Textilnorm), Working Committee NA 106-01-11 AA Geotextilien und Geokunststoffe. The DIN Standards corresponding to the International Standards referr

9、ed to in this document are as follows: ISO 10390 DIN ISO 10390 ISO/TS 13434 DIN EN ISO 13434 Amendments This standard differs from DIN EN 13254:2015-07 as follows: a) in 4.2), Table 1, all “H”-coded characteristics have been replaced by “A”. The characteristic “damage during installation” has been c

10、oded “S”, and a corresponding paragraph has been added in 4.3; b) in ZA.3, the example has been deleted. Previous editions DIN EN 13254: 2001-04, 2005-04, 2014-06, 2015-07 ) In the original European document, EN 13254, reference is erroneously made to 4.1 (see Annexes D and ZA). DIN EN 13254:2016-12

11、 3 National Annex NA (informative) Bibliography DIN ISO 10390, Soil quality Determination of pH DIN EN ISO 13434, Geotextiles and geotextile-related products Tear propagation tests DIN EN 13254:2016-12 4 This page is intentionally blank DIN EN 13254:2016-12EUROPEAN STANDARD NORME EUROPENNE EUROPISCH

12、E NORM EN 13254 October 2016 ICS 59.080.70 Supersedes EN 13254:2014+A1:2015English Version Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams Gotextiles et produits apparents - Caractristiques requises pour lutilisation dans

13、la construction de rservoirs et de barrages Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften fr die Anwendung beim Bau von Rckhaltebecken und Staudmmen This European Standard was approved by CEN on 4 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regu

14、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN memb

15、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C

16、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

17、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in

18、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13254:2016 EEN 13254:2016 (E) 2 Contents Page European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4 Re

19、quired characteristics and corresponding methods of test 8 4.1 General 8 4.2 Selection of the appropriate standard in a specific application 8 4.3 Characteristics relevant to specific conditions of use 11 4.3.1 Stiffness at 2 %, 5 % and 10 % 11 4.3.2 Tensile strength of seams and joints . 11 4.3.3 S

20、tatic puncture 11 4.3.4 Friction characteristics 11 4.3.5 Tensile creep 11 4.3.6 Resistance to damage during installation . 11 4.3.7 Water permeability normal to the plane . 11 4.4 Release of dangerous substances . 11 5 Assessment and verification of constancy of performance (AVCP) . 12 5.1 General

21、. 12 5.2 Presentation of characteristics . 12 5.3 Product type determination (PTD) 12 5.4 Factory production control (FPC) 13 5.5 Verification of values 13 5.6 Initial inspection of factory and of FPC 14 5.7 Continuous surveillance of FPC . 14 6 Marking 14 Annex A (normative) Factory production cont

22、rol . 15 A.1 Factory production control scheme 15 A.1.1 General . 15 A.1.2 Product design 15 A.1.3 Production 15 A.1.4 Finished products 15 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) 16 A.2 Assessment of a factory production control (FPC) system 17 A.2.1 Gen

23、eral . 17 A.2.2 Checklist 17 A.2.3 Test frequency . 21 Annex B (normative) Durability aspects 22 B.1 General . 22 B.1.1 Service life . 22 DIN EN 13254:2016-12 EN 13254:2016 (E) 3 B.1.2 Initial and repeat testing of durability 22 B.1.3 Use of rework material . 22 B.2 Weathering (all products) . 23 B.

24、3 Products used in non-reinforcing applications and with service lives up to 5 years 23 B.4 Other applications and service lives up to 25 years, 50 years and 100 years 24 B.4.1 General . 24 B.4.2 Tests for specific materials . 24 Annex C (informative) Guidelines for the selection of the appropriate

25、standard in a specific application 27 Annex D (informative) Significant technical changes to superseded versions of this standard . 29 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 30 Bibliography . 44 DIN EN 13254:201

26、6-12 EN 13254:2016 (E) 4 European foreword This document (EN 13254:2016) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text o

27、r by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by July 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any

28、 or all such patent rights. This document supersedes EN 13254:2014+A1:2015. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation No 305/2011. For relationship with Regulat

29、ion (EU) Nr. 305/2011, see informative Annex ZA, which is an integral part of this document. Annex D provides details of significant technical changes between this European Standard and the previous edition. According to the CEN-CENELEC Internal Regulations, the national standards organisations of t

30、he following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nether

31、lands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13254:2016-12 EN 13254:2016 (E) 5 Introduction This European Standard allows manufacturers to describe geotextiles and geotextile-related products on the basis of declared

32、values for characteristics relevant to the intended use and if tested to the specified method. It also includes procedures for the assessment and verification of constancy of performance and factory production control. This European Standard may also be used by designers, end-users and other interes

33、ted parties to define which functions and conditions of use are relevant. The term “product” used in this European Standard refers to a geotextile or geotextile-related product. This European Standard is part of a series of standards, addressing the requirements for geotextiles and geotextile-relate

34、d products when used in a specific application. Annex C provides guidance on how to select the appropriate standard. DIN EN 13254:2016-12 EN 13254:2016 (E) 6 1 Scope This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in the construction

35、of reservoirs and dams, and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation, reinforcement and protection. The separation function will al

36、ways occur in conjunction with filtration or reinforcement, and hence will not be specified alone. This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance of the p

37、roduct to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding additional properties and preferably standardized test methods, if they are technically relevant. This European Standard may be used to derive design values

38、 by taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure. 2 No

39、rmative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment

40、s) applies. EN 12224, Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12226, Geosynthetics - General tests for evaluation following durability testing EN 12447, Geotextiles and geotextile-related products - Screening test method for determining the resi

41、stance to hydrolysis in water EN 13719, Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers EN 14574, Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics EN ISO 1043-1, Plastics - Symbols

42、and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696) EN ISO 9862, Geosynthetics - Sampling and preparation of test specimens (ISO 9862) EN ISO 10318-1, Geosynthetics

43、- Part 1: Terms and definitions (ISO 10318-1) EN ISO 10319, Geosynthetics - Wide-width tensile test (ISO 10319) EN ISO 10320, Geotextiles and geotextile-related products - Identification on site (ISO 10320) EN ISO 10321, Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 1

44、0321) DIN EN 13254:2016-12 EN 13254:2016 (E) 7 EN ISO 10722, Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722) EN ISO 11058, Geotextiles and geotextile-related products - Determination of water permeab

45、ility characteristics normal to the plane, without load (ISO 11058) EN ISO 12236, Geosynthetics - Static puncture test (CBR test) (ISO 12236) EN ISO 12956, Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956) EN ISO 12957-1, Geosynthetics - Deter

46、mination of friction characteristics - Part 1: Direct shear test (ISO 12957-1) EN ISO 12957-2, Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2) EN ISO 13426-1, Geotextiles and geotextile-related products - Strength of internal structural junctions

47、 - Part 1: Geocells (ISO 13426-1) EN ISO 13426-2, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2) EN ISO 13431, Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO

48、13431) EN ISO 13433, Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433) EN ISO 13438, Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438) ISO 10390, Soil quality Determination of pH ASTM D7409 15, Standard Tes

49、t Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns ASTM D4603 03(2011) e1, Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 10318-1 and the following apply. 3.1.1 product geotextile or geotextile-related product 3.1.2