DIN EN 13255-2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals German version EN 13255 2016《土工织物及其相关产品 用于运河施工的土工织物及其.pdf

1、December 2016 English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 59.080.70!%u“2599182www.din.deD

2、IN EN 13255Geotextiles and geotextilerelated products Characteristics required for use in the construction of canals;English version EN 13255:2016,English translation of DIN EN 13255:2016-12Geotextilien und geotextilverwandte Produkte Geforderte Eigenschaften fr die Anwendung beim Kanalbau;Englische

3、 Fassung EN 13255:2016,Englische bersetzung von DIN EN 13255:2016-12Gotextiles et produits apparents Caractristiques requises pour lutilisation dans la construction de canaux;Version anglaise EN 13255:2016,Traduction anglaise de DIN EN 13255:2016-12SupersedesDIN EN 13255:201507See start of applicati

4、onwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 50 pages 12.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-12-01. It should be note

5、d that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard sh

6、ould refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 13255:2015-07, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the E

7、uropean Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 13255:2016) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics” (Secretariat: NBN, Belgium). The responsible German body involved in its preparation was DIN-Normenausschuss Textil un

8、d Textilmaschinen (Textilnorm) (DIN Standards Committee Textiles and Textile Machinery) (Textilnorm), Working Committee NA 106-01-11 AA Geotextilien und Geokunststoffe. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 10390 DIN ISO 10390

9、 ISO/TS 13434 DIN EN ISO 13434 Amendments This standard differs from DIN EN 13255:2015-07 as follows: a) in 4.2), Table 1, all “H”-coded characteristics have been replaced by “A”. The characteristic “damage during installation” has been coded “S”, and a corresponding paragraph has been added in 4.3;

10、 b) in ZA.3, the example has been deleted. Previous editions DIN EN 13255: 2001-04, 2005-04, 2014-06, 2015-07 ) In the original European document, EN 13255, reference is erroneously made to 4.1 (see Annexes D and ZA). DIN EN 13255:2016-123 National Annex NA (informative) Bibliography DIN ISO 10390,

11、Soil quality Determination of pH DIN EN ISO 13434, Geotextiles and geotextile-related products Tear propagation tests DIN EN 13255:2016-124 This page is intentionally blank DIN EN 13255:2016-12EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13255 October 2016 ICS 59.080.70 Supersedes EN 13255:2

12、014+A1:2015English Version Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals Gotextiles et produits apparents - Caractristiques requises pour lutilisation dans la construction de canaux Geotextilien und geotextilverwandte Produkte - Geforder

13、te Eigenschaften fr die Anwendung beim Kanalbau This European Standard was approved by CEN on 4 June 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

14、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

15、 translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

16、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZ

17、ATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13255:2016 EEN 13255:2016 (E) 2 Contents Page

18、 European foreword . 4 Introduction 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions . 7 3.2 Abbreviations . 8 4 Required characteristics and corresponding methods of test 8 4.1 General 8 4.2 Selection of the appropriate standard in a specific

19、 application 8 4.3 Characteristics relevant to specific conditions of use 11 4.3.1 Stiffness at 2 %, 5 % and 10 % 11 4.3.2 Tensile strength of seams and joints . 11 4.3.3 Static puncture 11 4.3.4 Friction characteristics 11 4.3.5 Tensile creep 11 4.3.6 Resistance to damage during installation . 11 4

20、.3.7 Water permeability normal to the plane . 11 4.4 Release of dangerous substances . 11 5 Assessment and verification of constancy of performance (AVCP) . 12 5.1 General . 12 5.2 Presentation of characteristics . 12 5.3 Product type determination (PTD) 12 5.4 Factory production control (FPC) 13 5.

21、5 Verification of values 14 5.6 Initial inspection of factory and of FPC 14 5.7 Continuous surveillance of FPC . 14 6 Marking 15 Annex A (normative) Factory production control . 16 A.1 Factory production control scheme 16 A.1.1 General . 16 A.1.2 Product design 16 A.1.3 Production 16 A.1.4 Finished

22、products 16 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) 17 A.2 Assessment of a factory production control (FPC) system 18 A.2.1 General . 18 A.2.2 Checklist 18 A.2.3 Test frequency . 22 Annex B (normative) Durability aspects 23 B.1 General . 23 B.1.1 Service

23、life . 23 DIN EN 13255:2016-12EN 13255:2016 (E) 3 B.1.2 Initial and repeat testing of durability 23 B.1.3 Use of rework material . 24 B.2 Weathering (all products) . 24 B.3 Products used in non-reinforcing applications and with service lives up to 5 years 24 B.4 Other applications and service lives

24、up to 25 years, 50 years and 100 years 25 B.4.1 General . 25 B.4.2 Tests for specific materials . 25 Annex C (informative) Guidelines for the selection of the appropriate standard in a specific application 29 Annex D (informative) Significant technical changes to superseded versions of this standard

25、 . 31 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 32 Bibliography . 46 DIN EN 13255:2016-12EN 13255:2016 (E) 4 European foreword This document (EN 13255:2016) has been prepared by Technical Committee CEN/TC 189 “Geos

26、ynthetics”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest July 2018. Atte

27、ntion is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13255:2014+A1:2015. This document has been prepared under a mandate given to

28、CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation No 305/2011. For relationship with Regulation (EU) Nr 305/2011, see informative Annex ZA, which is an integral part of this document. Annex D provides details of significant t

29、echnical changes between this European Standard and the previous edition. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Den

30、mark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13255:

31、2016-12EN 13255:2016 (E) 5 Introduction This European Standard allows manufacturers to describe geotextiles and geotextile-related products on the basis of declared values for characteristics relevant to the intended use and if tested to the specified method. It also includes procedures for the asse

32、ssment and verification of constancy of performance and factory production control. This European Standard may also be used by designers, end-users and other interested parties to define which functions and conditions of use are relevant. The term “product” used in this European Standard refers to a

33、 geotextile or geotextile-related product. This European Standard is part of a series of standards, addressing the requirements for geotextiles and geotextile-related products when used in a specific application. Annex C provides guidance on how to select the appropriate standard. DIN EN 13255:2016-

34、12EN 13255:2016 (E) 6 1 Scope This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in the construction of canals, and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-rela

35、ted products is to fulfil one or more of the following functions: filtration, separation, reinforcement and protection. The separation function will always occur in conjunction with filtration or reinforcement, and hence will not be specified alone. This European Standard is not applicable to geosyn

36、thetic barriers, as defined in EN ISO 10318-1. This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding addit

37、ional properties and preferably standardized test methods, if they are technically relevant. This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997-1 (Eurocode 7), e.g. factors of safety. The design life of the

38、 product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicatio

39、n. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12224, Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12226, Geosynthetics - General t

40、ests for evaluation following durability testing EN 12447, Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water EN 13719, Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynt

41、hetic barriers EN 14574, Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics EN ISO 1043-1, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 3696, Water for analytical laboratory use - Spec

42、ification and test methods (ISO 3696) EN ISO 9862, Geosynthetics - Sampling and preparation of test specimens (ISO 9862) EN ISO 10318-1, Geosynthetics - Part 1: Terms and definitions (ISO 10318-1) EN ISO 10319, Geosynthetics - Wide-width tensile test (ISO 10319) EN ISO 10320, Geotextiles and geotext

43、ile-related products - Identification on site (ISO 10320) EN ISO 10321, Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321) DIN EN 13255:2016-12EN 13255:2016 (E) 7 EN ISO 10722, Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeat

44、ed loading - Damage caused by granular material (ISO 10722) EN ISO 11058, Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058) EN ISO 12236, Geosynthetics - Static puncture test (CBR test) (ISO 12236) EN ISO 1

45、2956, Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956) EN ISO 12957-1, Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1) EN ISO 12957-2, Geosynthetics - Determination of friction characteristi

46、cs - Part 2: Inclined plane test (ISO 12957-2) EN ISO 13426-1, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1) EN ISO 13426-2, Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Ge

47、ocomposites (ISO 13426-2) EN ISO 13431, Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431) EN ISO 13433, Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433) EN ISO 13438, Geotextiles and geotextile-related products -

48、 Screening test method for determining the resistance to oxidation (ISO 13438) ISO 10390, Soil quality Determination of pH ASTM D7409 15, Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns ASTM D4603 03(2011)e1, Standard Test Method for Determining Inherent

49、 Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 10318-1 and the following apply. 3.1.1 product geotextile or geotextile-related product 3.1.2 specification document in which the work, functions and specific conditions of use of the product are described DIN EN 13255:2016-12EN 13255:2016 (E) 8 3.1.