1、June 2015Translation by DIN-Sprachendienst.English price group 10No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 93
2、.080.20!%C*t“2320781www.din.deDDIN EN 13282-3Hydraulic road binders Part 3: Conformity evaluation;English version EN 13282-3:2015,English translation of DIN EN 13282-3:2015-06Hydraulische Tragschichtbinder Teil 3: Konformittsbewertung;Englische Fassung EN 13282-3:2015,Englische bersetzung von DIN EN
3、 13282-3:2015-06Liants hydrauliques routiers Partie 3: valuation de la conformit;Version anglaise EN 13282-3:2015,Traduction anglaise de DIN EN 13282-3:2015-06SupersedesDIN EN 13282-3:2013-06www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document compris
4、es 16 pages05.15 DIN EN 13282-3:2015-06 2 A comma is used as the decimal marker. National foreword This document (EN 13282-3:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes” (Secretariat: NBN, Belgium). The responsible German body involved in its preparation was t
5、he DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-07-18 AA Tragschicht-binder, SpA zu CEN/TC 51/WG 14. Amendments This standard differs from DIN EN 13282-3:2013-06 as follows: a) the terminology has been brought in line with the Constr
6、uction Products Regulation (Regulation (EU) No 305/2011); b) information is given on the relationship between this European Standard and Annexes ZA of European Standards covering cements. Previous editions DIN EN 13282-3: 2013-06 EN 13282-3April 2015 ICS 93.080.20 Supersedes EN 13282-3:2013English V
7、ersion Hydraulic road binders - Part 3: Conformity evaluation Liants hydrauliques routiers - Partie 3: valuation de la conformit Hydraulische Tragschichtbinder - Teil 3: Konformittsbewertung This European Standard was approved by CEN on 1 February 2015. CEN members are bound to comply with the CEN/C
8、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr
9、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
10、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla
11、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN
12、 13282-3:2015 EEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13282-3:2015 (E) 2 Contents PageForeword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Factory production control by
13、 the manufacturer . 6 4.1 General requirements 6 4.1.1 Concept . 6 4.1.2 Works quality manual . 6 4.1.3 Management systems . 7 4.1.4 System of documentation . 7 4.2 Internal quality control 7 4.2.1 Process control 7 4.2.2 Measuring and testing . 8 4.2.3 Handling, storage, packaging and delivery 8 4.
14、3 Autocontrol testing of samples 8 4.3.1 Sampling and testing 8 4.3.2 Evaluation of results of autocontrol testing of samples . 8 4.3.3 Corrective action 9 4.3.4 Measuring and test equipment for autocontrol testing . 9 4.3.5 Quality records . 9 5 Determination of the product-type . 9 6 Assessment of
15、 the factory production control . 10 6.1 Continuous surveillance, assessment and evaluation of factory production control . 10 6.1.1 Inspection tasks . 10 6.1.2 Frequency of inspections . 10 6.1.3 Reports . 10 6.2 Initial inspection of the factory and the factory production control 10 6.2.1 Inspecti
16、on of a new factory 10 6.2.2 Inspection of an existing factory 10 6.2.3 Criteria for the assessment of the production equipment 10 6.2.4 Criteria for the activities of the laboratories . 11 6.2.5 Reports . 11 7 Actions in the event of non-conformity . 11 7.1 Actions to be taken by the manufacturer 1
17、1 7.2 Actions to be taken in case of a non-conforming factory production control system 11 8 Requirement for dispatching centres 12 8.1 General 12 8.2 Tasks for the intermediary 12 8.2.1 Quality control 12 8.2.2 Confirmation autocontrol testing of samples taken at the dispatching centre 12 Bibliogra
18、phy 14 DIN EN 13282-3:2015-06EN 13282-3:2015 (E) 3 Foreword This document (EN 13282-3:2015) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publ
19、ication of an identical text or by endorsement, at the latest by October 2015 and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC
20、shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13282-3:2013. This European Standard, EN 13282, Hydraulic road binders consists of the following parts: Part 1: Rapid hardening hydraulic road binders Composition, specifications and conformity c
21、riteria Part 2: Normal hardening hydraulic road binders Composition, specifications and conformity criteria Part 3: Conformity evaluation Compared to the version EN 13282-3:2013 the following major changes have been included in this document: Use of the terminology given by the Construction Products
22、 Regulation (Regulation (EU) No 305/2011). Link between this European Standard and Annexes ZA of European Standards covering cements. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Aust
23、ria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swede
24、n, Switzerland, Turkey and the United Kingdom. DIN EN 13282-3:2015-06EN 13282-3:2015 (E) 4 1 Scope This European Standard specifies the scheme for the assessment and verification of constancy of performance of hydraulic road binders and their conformity with the corresponding product specification s
25、tandards EN 13282-1 and EN 13282-2. This European Standard provides technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity. This European Standard should be linked
26、with Annexes ZA of European Standards covering hydraulic road binders, i.e. EN 13282-1 and EN 13282-2, in particular for the assignments of tasks to the manufacturer and to the production control certification body. 2 Normative references The following documents, in whole or in part, are normatively
27、 referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement - Part 1: Determination of stren
28、gth EN 196-2, Methods of testing cement - Part 2: Chemical analysis of cement EN 196-3, Methods of testing cement - Part 3: Determination of setting times and soundness EN 196-7, Methods of testing cement - Part 7: Methods of taking and preparing samples of cement EN 13282-1, Hydraulic road binders
29、- Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria EN 13282-2, Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria 3 Terms and definitions For the purposes of this document,
30、 the following terms and definitions apply. 3.1 AVCP abbreviation for assessment and verification of constancy of performance 3.2 certificate of conformity of factory production control document issued under the rules of this scheme for the AVCP indicating that adequate confidence is provided that f
31、actory production control is in conformity with the relevant product specification standard 3.3 conformity mark protected mark applied on the basis of the certificate of conformity of the factory production control 3.4 initial period immediate period starting after the first issuing of the certifica
32、te of conformity of factory production control for a hydraulic road binder and at the latest from the first dispatching of hydraulic road binder DIN EN 13282-3:2015-06EN 13282-3:2015 (E) 5 3.5 production control certification body impartial body, governmental or non-governmental, possessing the nece
33、ssary competence and responsibility to carry out the certification of the factory production control according to given rules of procedure and management 3.6 factory production control documented, permanent and internal control of production in a factory, in accordance with the relevant harmonised t
34、echnical specifications 3.7 factory facility used by a manufacturer for the production of hydraulic road binders,using equipment which is suitable for continuous mass production of hydraulic road binder including, in particular, equipment for adequate grinding and homogenisation and the necessary si
35、lo capacity for the storage and dispatch of each hydraulic road binder produced Note 1 to entry: This equipment and the production control applied allow the control of production to ensure that the requirements of the relevant product specification standard are met. 3.8 new factory factory which is
36、not already producing hydraulic road binder(s) certified using this European Standard 3.9 existing factory factory which is already producing hydraulic road binder(s) certified using this European Standard 3.10 depot bulk hydraulic road binder handling facility (not located at the factory) used for
37、the dispatch of hydraulic road binder (whether in bulk or bagged) after transfer or storage where the manufacturer has full responsibility for all aspects of the quality of the hydraulic road binder 3.11 dispatching centre facility (not located at the factory) for handling and dispatching of hydraul
38、ic road binder (received in bulk or in any other condition) by activities that shall not modify the characteristics or the integrity of the product received from the manufacturer, where an intermediary has full responsibility for all aspects of the quality of the hydraulic road binder 3.12 intermedi
39、ary natural or legal person who takes from the manufacturer or the importer hydraulic road binder certified using this European Standard and bearing the conformity mark, taking full responsibility for maintaining in a hydraulic road binder handling facility all aspects of the quality of the hydrauli
40、c road binder and who supplies the hydraulic road binder onwards to a further person 3.13 determination of the product-type determination of the set of representative performance levels or classes of a construction product, in relation to its essential characteristics, on the basis of type testing (
41、including sampling), type calculation, tabulated values or descriptive documentation of the product 3.14 confirmation autocontrol testing continual testing carried out by an intermediary which consists of testing of samples taken by the intermediary at the point(s) of release from the dispatching ce
42、ntre DIN EN 13282-3:2015-06EN 13282-3:2015 (E) 6 3.15 works quality manual document that provides information on the factory production control which is applied by a manufacturer at a particular factory to ensure conformity of the hydraulic road binder with the requirements of this European Standard
43、 and the relevant product specification standard 4 Factory production control by the manufacturer 4.1 General requirements 4.1.1 Concept Factory production control is exercised by the manufacturer and consists of internal quality control (see 4.2) complemented by testing of samples taken at manufact
44、uring plant in accordance with a prescribed test plan1)(see 4.3) and an assessment of the performance of the hydraulic road binder on the basis of testing (including sampling) or descriptive documentation of this product . NOTE The requirements of this European Standard as regards factory production
45、 control take account of those clauses of EN ISO 9001 3 which are relevant to the production, process control and testing of hydraulic road binder. 4.1.2 Works quality manual The manufacturers documentation and procedures for factory production control shall be described in a Works quality manual, w
46、hich shall adequately describe, among other things: a) the quality aims and the organisational structure, responsibilities and powers of the management with regard to product quality and the means to monitor the achievement of the required product quality and the effective operation of the internal
47、quality control (see 4.1.3); b) the manufacturing and quality control techniques, processes and systematic actions that will be used (see 4.2.1, 4.2.3 and 4.3.2); c) the inspections and tests that will be carried out before, during and after manufacture, and the frequency with which they will be car
48、ried out (see 4.2.2, 4.3.1 and 4.3.3). The Works quality manual prepared by the manufacturer for each factory shall include an adequate system of documentation (see 4.1.4 and 4.3.4). The Works quality manual shall address and document the procedures operated to ensure that the manufactured hydraulic
49、 road binder conforms to the technical specifications. The manual may reference associated documents which provide further details of the autocontrol testing of samples and the internal quality control. For the purpose of this scheme, the term Works quality manual shall be considered to include these associated documents. In the case of an existing quality management system according to EN ISO 9001 3, it may be examined if the corresponding quality manual meets all the
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1