DIN EN 13286-51-2005 Unbound and hydraulically bound mixtures - Part 51 Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compacti.pdf

1、DEUTSCHE NORM March 2005DIN EN 13286-51 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).English price group 6 www.din.

2、de www.beuth.de06.05 9633461Document comprises 9 pages.Unbound and hydraulically bound mixturesPart 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compactionEnglish version of DIN EN 13286-51Ungebundene und hydraulisch gebundene Gemische Teil

3、51: Verfahren zur Herstellung von Probekrpern von hydraulisch gebundenen Gemischen durch Verdichtung mit VibrationshammerA comma is used as the decimal marker.National forewordThis standard has been prepared by CEN/TC 227 Road materials (Secretariat: Germany).The responsible German body involved in

4、its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Technical Committee 10.10.00 Hydraulisch gebundene und ungebundene Mischungen.This European Standard is part of a series of standards dealing with unbound and hydraulically bound mix-tures within t

5、he scope of the EC Directive on the approximation of the laws, regulations and administrative provisions of the Member States relating to construction products.It should be noted that not all of the DIN Standards dealing with unbound and hydraulically bound mixtures need yet be withdrawn. This is in

6、 keeping with resolution C 88/98 taken by CEN/BT, which states that where packages of EN Standards are concerned, it shall be permitted for the relevant national standards to re-main valid for longer periods than usual, until the EN package has been published in its entirety.In the case at hand, the

7、 packages cover the DIN EN 14227-1 to DIN EN 14227-5 series (product standards) and the DIN EN 13286-41 to DIN EN 13286-53 series (dealing with test methods).ICS 93.080.20English versionICS 93.080.20Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Eur

8、open de NormalisationEuropisches Komitee fr Normung 2004. CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national members.Ref. No. EN 13286-51 : 2004 EEN 13286-51December 2004Unbound and hydraulically bound mixturesPart 51: Method for the manufacture of test s

9、pecimens of hydraulically bound mixtures using vibrating hammer compactionMlanges traits et mlanges non traits aux liants hydrauliques Par-tie 51: Mthode de confection par compactage au marteau vibrant des prouvettes de matriaux traits au liants hydrauliquesUngebundene und hydraulisch gebun-dene Gem

10、ische Teil 51: Verfahren zur Herstellung von Probekrpern von hydraulisch gebundenen Gemischen durch Verdichtung mit Vibrationsham-merThis European Standard was approved by CEN on 2004-11-12.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for g

11、iving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.The European Standards exist in three ofcial versions

12、(English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notied to the Management Centre has the same status as the ofcial versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, the

13、Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Page 2 EN 13286-51 : 2004Page 3 EN 13286-51 : 2004Page 4 EN 13286-51 : 2004Page 5 EN 13286-51 : 2004Page 6 EN 13286-51 : 2004Page 7 EN 13286-51 : 2004Page 8 EN 13286-51 : 2004