DIN EN 1333-2006 Flanges and their joints - Pipework components - Definition and selection of PN English version of DIN EN 1333 2006-06《法兰盘及其连接件 管道部件 PN的定义和选择》.pdf

1、 DEUTSCHE NORMJune 2006DIN EN 1333 ICS 01.040.23; 23.040.60 Supersedes DIN EN 1333:1996-10 Flanges and their joints Pipework components Definition and selection of PN English version of DIN EN 1333:2006-06 Flansche und ihre Verbindungen Rohrleitungsteile Definition und Auswahl von PN Englische Fassu

2、ng DIN EN 1333:2006-06 Document comprises 5 pages No part of this standard may be reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 5

3、 www.din.de www.beuth.de !,o/3“10.06 9761216DIN EN 1333:2006-06 2 National foreword This standard has been prepared by CEN/TC 74 Flanges and their joints (Secretariat: Germany). The responsible German body involved in its preparation was the Normenausschuss Rohrleitungen und Dampfkesselanlagen (Pipe

4、lines and Boilers Standards Committee), Technical Committee NA 082-00-16 AA Flansche und ihre Verbindungen. Amendments This standard differs from DIN EN 1333:1996-10 as follows: a) The foreword has been updated. b) Pressure ratings PN 160, PN 250, PN 320 and PN 400 have been included. Previous editi

5、ons DIN 2401: 1926-04, 1929-06, 1936-08 DIN 2401-1: 1966-01, 1977-05, 1991-09 DIN 1333: 1996-10 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 1333March 2006ICS 01.040.23; 23.040.01 Supersedes EN 1333:1996 English VersionFlanges and their joints - Pipework components - Definition andselection of

6、PNBrides et leurs assemblages - Composants de rseaux detuyauteries - Dfinition et slection des PNFlansche und ihre Verbindungen - Rohrleitungsteile -Definition und Auswahl von PNThis European Standard was approved by CEN on 23 January 2006.CEN members are bound to comply with the CEN/CENELEC Interna

7、l Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.Thi

8、s European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the n

9、ational standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki

10、ngdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1333:2006: EEN 1333:2

11、006 (E) 2 Foreword This document (EN 1333:2006) has been prepared by Technical Committee CEN/TC 74 “Flanges and their joints”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsemen

12、t, at the latest by September 2006, and conflicting national standards shall be with-drawn at the latest by September 2006. This document supersedes EN 1333:1996. This document is based on the international standard ISO 7268:1983, but the misleading definition of “nominal pressure“ has been omitted

13、as it is so loosely related to the maximum allowable pressure. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, Franc

14、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and United Kingdom. EN 1333:2006 (E) 3 1 Scope This European Standard gives the definition of PN when applied t

15、o components of a pipework system, as specified in those standards which use the PN designation system. This standard specifies the PN numbers which are used. 2 Terms and definitions For the purposes of this document, the following term and definition applies. 2.1 PN alphanumeric designation used fo

16、r reference purposes related to a combination of mechanical and dimen-sional characteristics of a component of a pipework system. It comprises the letters PN followed by a dimensionless number. NOTE 1 The number following the letters PN does not represent a measurable value and should not be used fo

17、r calcu-lation purposes except where specified in the relevant standard. NOTE 2 The designation PN is not meaningful unless it is related to the relevant component standard number. NOTE 3 The maximum allowable pressure of a pipework component depends on the PN number, the material and design of the

18、component, its maximum allowable temperature, etc. The relevant European Component standards include tables of specified pressure/temperature ratings or, in minimum, include rules how to determine pressure/temperature ratings. NOTE 4 It is intended that all components with the same PN and DN designations have the same mating dimensions for compatible flange types. 3 Selection of PN The PN values shall be selected from: PN 2,5 PN 25 PN 160 PN 6 PN 40 PN 250 PN 10 PN 63 PN 320 PN 16 PN 100 PN 400