DIN EN 13438-2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes German version EN 13438 2013《涂料和清漆 建.pdf

1、December 2013 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 25.220.60!%*r“2077997www.din.deDDIN EN 13438Paints and varnishes Powder organic coatings for hot dip galvanised or sherardised steelproducts for construction purposes;English version EN 13438:2013,English translation of DIN EN 13438:2013-12Beschichtungsstoffe Pulverbeschichtungen fr feuerverzinkt

3、e oder sherardisierte Stahlerzeugnisse frBauzwecke;Englische Fassung EN 13438:2013,Englische bersetzung von DIN EN 13438:2013-12Peintures et vernis Revtements de poudre organique pour produits en acier galvanis chaud oushrardis utiliss dans la construction;Version anglaise EN 13438:2013,Traduction a

4、nglaise de DIN EN 13438:2013-12SupersedesDIN EN 13438:2006-01 andDIN EN 13438 Corrigendum1:2007-12www.beuth.deIn case of doubt, the German-language original shall be considered authoritative.Document comprises 29 pages 11.13 DIN EN 13438:2013-12 2 A comma is used as the decimal marker. National fore

5、word This document (EN 13438:2013) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe und Beschichtungen (Coatings and Coating Materials Standards

6、Committee), Working Committees NA 002-00-10-05 UA Korrosionsschutzstoffe und -systeme, einschlielich Prfung and NA 002-00-10 AA Korrosionsschutz von Stahlbauten. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 10474 DIN EN 10204 Amendments

7、 This standard differs from DIN EN 13438:2006-01 und DIN EN 13438 Corrigendum 1:2007-12 as follows: a) the term “test sample” has been deleted; b) a new term “substrate” has been introduced; c) Clause 4 includes references to EN ISO 14713-2 and EN ISO 14713-3 to optimise the design of articles to be

8、 processed in accordance with this standard; d) tolerance limits on gloss requirements have been tightened slightly for gloss levels over 50 units (reduced from 10 units to 7 units) and “Table 1 Gloss requirements” has been deleted; e) Clause 6 has been edited to clarify references to “cleaning” as

9、distinct from “preparation” or “pretreatment”; f) reference to (old) Table 1 in Subclause 6.5.5 “Gloss” has been deleted; g) an adhesion test on the finished powder coated article is no longer mandatory (see revised Sub-clause 6.5.6) and should be specified, if required; h) a new “Table 1 Summary of

10、 tests” has been included in Clause 7 for ease of reference; i) the minimum thickness of coated test panels used for tests for mechanical properties has been increased from 0,3 mm to 1,0 mm (see A.3.1); j) references to updated standards have been included, e.g. replacement of ISO 7724-3 with EN ISO

11、 11664-4 (see A.4.2) and replacement of ISO 1518 with EN ISO 1518-1 (see A.4.5); k) Annex B has been modified to clarify references to “cleaning” and “pretreatment” and the content reduced; l) the possibility of an adhesion test on finished articles is now included in Annex D (see D.3.5); m) the con

12、tent of Annex E has been reduced for further information, reference has been made to EN 15773; n) the standard has been editorially revised. Previous editions DIN EN 13483: 2006-01 DIN EN 13483 Corrigendum 1: 2007-12 DIN EN 13438:2013-12 3 National Annex NA (informative) Bibliography DIN EN ISO 1020

13、4, Metallic products Types of inspection documents DIN EN 13438:2013-12 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13438 September 2013 ICS 25.220.60 Supersedes EN 13438:2005English Version Paints and varnishes - Powder organic coatings for hot dip galvan

14、ised or sherardised steel products for construction purposes Peintures et vernis - Revtements de poudre organique pour produits en acier galvanis chaud ou shrardis utiliss dans la construction Beschichtungsstoffe - Pulverbeschichtungen fr feuerverzinkte oder sherardisierte Stahlerzeugnisse fr Bauzwe

15、cke This European Standard was approved by CEN on 19 July 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re

16、ferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

17、CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedo

18、nia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROP

19、ISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13438:2013: EEN 13438:2013 (E) 2 Contents Page Foreword . 4 Introduction 5 1 Scope 6 2

20、Normative references . 6 3 Terms and definitions 7 4 Substrate material 8 5 Coating powder 8 5.1 Identification . 8 5.2 Storage . 8 5.3 Performance requirements 9 5.3.1 General . 9 5.3.2 Colour . 9 5.3.3 Gloss . 9 5.3.4 Adhesion 9 5.3.5 Resistance to scratching . 9 5.3.6 Resistance to deformation .

21、9 5.3.7 Resistance to mortar 9 5.3.8 Resistance to weathering 9 5.3.9 Resistance to humidity 10 5.3.10 Resistance to sulfur dioxide 10 5.3.11 Permeability 10 5.3.12 Resistance to salt spray 10 5.4 Health and safety information . 10 6 Application . 11 6.1 Cleaning and pretreatment of the hot dip galv

22、anised or sherardised substrate . 11 6.2 Coating powder 11 6.3 Application of coating powder 11 6.4 Significant surfaces of coated article 11 6.5 Performance requirements of the powder coated article . 11 6.5.1 General . 11 6.5.2 Surface appearance . 11 6.5.3 Colour . 11 6.5.4 Thickness . 11 6.5.5 G

23、loss . 12 6.5.6 Adhesion 12 7 Certificate of conformity 12 Annex A (normative) Methods of test for coating powders 15 A.1 General . 15 A.2 Sampling . 15 A.3 Coated test panels . 15 A.3.1 Material and dimensions 15 A.3.2 Pretreatment . 15 A.3.3 Coating of the test panels 15 A.3.4 Determination of thi

24、ckness 15 A.3.5 Appearance and conditioning . 16 A.4 Test procedures on coated test panels . 16 A.4.1 Surface . 16 DIN EN 13438:2013-12 EN 13438:2013 (E) 3 A.4.2 Colour . 16 A.4.3 Gloss . 16 A.4.4 Adhesion . 16 A.4.5 Resistance to scratching . 17 A.4.6 Resistance to deformation . 17 A.4.7 Resistance

25、 to mortar 17 A.4.8 Resistance to weathering. 17 A.4.9 Resistance to humidity 17 A.4.10 Resistance to sulfur dioxide 18 A.4.11 Permeability 18 A.4.12 Resistance to salt spray . 18 Annex B (informative) Guidance on cleaning and pretreatment processes . 19 B.1 Cleaning 19 B.2 Pretreatment . 19 B.3 Typ

26、es of pretreatment 19 B.3.1 Conversion and drying of the conversion coating (chemical pretreatment) . 19 B.3.2 Mechanical pretreatment 20 Annex C (informative) Guidelines on the powder coating process . 21 Annex D (normative) Methods of test for powder coatings . 22 D.1 General . 22 D.2 Test piece p

27、reparation . 22 D.3 Test procedures on finished articles . 22 D.3.1 Surface appearance . 22 D.3.2 Colour . 22 D.3.3 Thickness . 22 D.3.4 Gloss . 22 D.3.5 Adhesion . 22 D.4 Test procedures on test panels . 23 Annex E (informative) Guidelines on the care and protection of powder coated hot dip galvani

28、sed or sherardised steel components 24 E.1 Packing and handling. 24 E.2 Tapes 24 Bibliography 25 DIN EN 13438:2013-12 EN 13438:2013 (E) 4 Foreword This document (EN 13438:2013) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This E

29、uropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elem

30、ents of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13438:2005. In relation to EN 13438:2005, the following main amendments have been made: a) the term defined as “test

31、sample“ has been removed; b) a new term “substrate“ has been introduced; c) a paragraph in Clause 4 includes references to EN ISO 14713-2 and EN ISO 14713-3 to optimise design of articles sent for processing to this standard; d) tolerance limits on gloss requirements has been tightened slightly for

32、gloss levels over 50 units (reduced from 10 units to 7 units) and “Table 1 Gloss requirements“ removed; e) Clause 6 has been edited to clarify references to “cleaning“ as distinct from “preparation“ or “pretreatment“; f) reference to (old) Table 1 in 6.5.5 “Gloss“ has been removed; g) an adhesion te

33、st on the finished powder coated article is now not mandatory (see revised 6.5.6) and if required should be specified; h) a new “Table 1 Summary of tests“ has been included for ease of reference, after Clause 7; i) the minimum thickness of coated test panels used for tests for mechanical properties

34、has been increased from 0,3 mm to 1,0 mm (see A.3.1); j) reference to updated standards have been included, e.g. replacement of ISO 7724-3 with EN ISO 11664-4 (see A.4.2) and replacement of ISO 1518 with EN ISO 1518-1 (see A.4.5); k) Annex B has been edited to clarify references to “cleaning“ and “p

35、retreatment“ and the content reduced; l) the possibility of an adhesion test on finished article now included in Annex D (see D.3.5); m) the content of Annex E has been reduced reference has been made to EN 15773 for further information. According to the CEN-CENELEC Internal Regulations, the nationa

36、l standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua

37、nia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13438:2013-12 EN 13438:2013 (E) 5 Introduction This European Standard has been produced as a result of the growing demand for products made of

38、 powder coated hot dip galvanised or sherardised steel. These products offer a combination of corrosion resistance and decorative appearance. It is assumed in the drafting of this standard that the specified test methods will be applied by those who are suitably trained and supervised. This European

39、 Standard has been written from a coating performance perspective and does not seek to set out one method of powder coating hot dip galvanised or sherardised steel products. Nevertheless, in order to facilitate production of the best quality powder coated hot dip galvanised or sherardised articles,

40、experience has shown how important it is that sufficient dialogue between the client, specifier, designer, fabricator, galvaniser or sherardiser and powder coating applicator takes place at the earliest stages of the project and that, where possible, timescales set out for processing of the work are

41、 practical and adhered to. It is strongly recommended that the guidance document for supply of duplex coatings, EN 15773, Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles duplex systems Specifications, recommendations and guidelines, is used in co

42、mbination with this standard when specifying for duplex systems. DIN EN 13438:2013-12 EN 13438:2013 (E) 6 1 Scope This European Standard specifies performance requirements for organic coating powders and powder organic coatings as applied to finished articles (hot dip galvanised or sherardised steel

43、 products) for construction purposes. Hot dip galvanised steel products can be articles that have been batch hot dip galvanised (hot dip galvanised after fabrication) or articles consisting of continuously hot dip galvanised sheet which is then subsequently fabricated. This European Standard does no

44、t set out any performance requirements for the powder coating process itself. Guidance on cleaning and pretreatment of the hot dip galvanised or sherardised steel products prior to powder coating is provided. This European Standard does not apply to articles with zinc-aluminium coatings or aluminium

45、-zinc coatings, or to continuously hot dip galvanised wire. This standard does not apply to organic coating powders and powder organic coatings as applied to hot dip galvanised or sherardised steel products (i.e. duplex coated articles) for which there are specific standards, which might include add

46、itional requirements or requirements which are different from those of this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For

47、undated references, the latest edition of the referenced document (including any amendments) applies. EN 10346, Continuously hot-dip coated steel flat products Technical delivery conditions EN 13811, Sherardizing Zinc diffusion coatings on ferrous products Specification EN ISO 1461, Hot dip galvaniz

48、ed coatings on fabricated iron and steel articles Specifications and test methods (ISO 1461) EN ISO 1518-1, Paints and varnishes Determination of scratch resistance Part 1: Constant loading method (ISO 1518-1) EN ISO 1519, Paints and varnishes Bend test (cylindrical mandrel) (ISO 1519) EN ISO 2178, Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method (ISO 2178) EN ISO 2409, Paints and varnishes Cross-cut test (ISO 2409) EN ISO 2808, Paints and varn