DIN EN 13457-2010 Footwear leather and imitation leather goods manufacturing machines - Splitting skiving cutting cementing and cement drying machines - Safety requirements German .pdf

1、October 2010 Translation by DIN-Sprachendienst.English price group 23No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 59.140.40; 61.060!$kZz“1725587www.din.deDDIN EN 13457Footwear, leather and imitation leather goods manufacturingmachines Splitting, skiving, cutting, cementing and cement drying machines Safety requirements (includes Amendment A1:2010)English translation of DIN EN 13457:2010-10Maschinen zur Herste

3、llung von Schuhen, Leder- und Kunstlederwaren Spalt-, Schrf-, Schneid-, Klebstoffauftrag- und Klebstofftrocknungsmaschinen Sicherheitsanforderungen (enthlt nderung A1:2010)Englische bersetzung von DIN EN 13457:2010-10Machines de fabrication de chaussures et darticles en cuir et en matriaux similaire

4、s Machines refendre, parer, couper, encoller et scher ladhsif Prescriptions de scurit (Amendement A1:2010 inclus)Traduction anglaise de DIN EN 13457:2010-10SupersedesDIN EN 13457:2005-07See start of validitywww.beuth.deDocument comprises pagesIn case of doubt, the German-language original shall be c

5、onsidered authoritative.6510.10 DIN EN 13457:2010-10 2 A comma is used as the decimal marker. Start of validity This standard takes effect on 1 October 2010. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee CEN/TC 201 “Leather and i

6、mitation leather goods and footwear manufacturing machinery Safety” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Section Schuh- und Ledermaschinen. This standard contains specific

7、ations meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 98/37/EC, and which apply to splitting, skiving, cutting, cementing and cement drying machines that are either first placed on the market or commissioned within the EEA. This standard serves to facil

8、itate proof of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Dir

9、ective (“presumption of conformity”). The European Standards referred to in Clause 2 of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Amendments This standard differs from DIN EN 13457:2005-07 as follows: a) the foreword has been modified; b) th

10、e introduction has been modified; c) Clause 1 “Scope” has been modified; d) Clause 2 “Normative references” has been modified; e) Clause 3 “Terms and definitions” has been modified; f) Clause 4 “List of significant hazards” has been modified; g) Clause 5 “Safety requirements and/or protective measur

11、es” has been modified; h) Clause 6 “Verification of safety requirements and/or protective measures” has been modified; i) Clause 7 “Information for use” has been modified; j) Annex A “Requirements for guards” has been modified; DIN EN 13457:2010-10 3 k) Annex B “Requirements for interlocking guards”

12、 has been modified; l) Annex C “Requirements for trip device” has been modified; m) Annex D “Requirements for hold-to-run control device” has been modified; n) Annex E “Noise test code for splitting, skiving, cutting, cementing and cement drying machines” has been modified; o) Annex F “Prevention ag

13、ainst explosions” has been modified; p) Annex G “Requirements for pressure sensitive mats and floors” has been modified; q) Annex H “Temperatures of burn threshold” has been modified; r) Annex I “Requirements for control guards (interlocking guard with start function) has been modified; s) Annex ZA

14、(informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC” has been modified. t) Annex ZB (informative) “Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC” has been included. Previous edition

15、s DIN EN 13457: 2005-07 DIN EN 13457:2010-10 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13457:2004+A1 April 2010 ICS 59.140.40; 61.060 Supersedes EN 13457:2004English Version Footwear, leather and imitation leather goods manufacturing machines - Splitting

16、, skiving, cutting, cementing and cement drying machines - Safety requirements Machines de fabrication de chaussures et darticles en cuir et en matriaux similaires - Machines refendre, parer, couper, encoller et scher ladhsif - Prescriptions de scurit Maschinen zur Herstellung von Schuhen, Leder- un

17、d Kunstlederwaren - Spalt-, Schrf-, Schneid-, Klebstoffauftrag- und Klebstofftrocknungsmaschinen - Sicherheitsanforderungen This European Standard was approved by CEN on 8 August 2004 and includes Amendment 1 approved by CEN on 18 March 2010. CEN members are bound to comply with the CEN/CENELEC Inte

18、rnal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN mem

19、ber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN memb

20、ers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

21、 Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Memb

22、ers. Ref. No. EN 13457:2004+A1:2010: EEN 13457:2004+A1:2010 (E) Contents 2 Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .9 4 !List of significant hazards“10 5 Safety requirements and/!or protective measures“.26 5.1 General principles26 5.2 Common requirem

23、ents for all machines within the scope .26 5.2.1 Mechanical equipment 26 5.2.2 Electrical equipment27 5.2.3 Thermal protection 27 5.2.4 Protection against fire.27 5.2.5 Noise control at the design state .28 5.2.6 Fumes and dust detrimental to health.28 5.2.7 Ergonomics 28 5.2.8 Pressurized fluid sys

24、tems 29 5.2.9 Control systems.29 5.2.10 Additional safety devices30 5.2.11 Aids for transportation30 5.3 Additional requirements for specific machines .30 5.3.1 Splitting machines (see Figure 1) 30 5.3.2 Skiving machines (Figure 2).31 5.3.3 Cutting machines (Figures 3 and 4).31 5.3.4 Strip cutting m

25、achines (Figure 5).31 5.3.5 Cementing machines (Figures 6, 7, 8, 9, 10 and 11).31 5.3.6 Cement drying machines (Figure 12).32 6 !Verification of safety requirements and/or protective measures“33 7 Information for use 40 7.1 General40 7.2 Signal and warning devices40 7.3 Instruction handbook (operati

26、ng manual) 40 7.4 Declared noise emission values 41 7.5 !Marking“41 Annex A (normative) Requirements for guards 43 Annex B (normative) Requirements for interlocking guards 45 Annex C (normative) Requirements for trip device46 Annex D (normative) Requirements for hold-to-run control device .49 Annex

27、E (normative) Noise test code for splitting-, skiving-, cutting-, cementing- and cement drying machines 51 Annex F (normative) Prevention against explosions .54 Annex G (normative) Requirements for pressure sensitive mats and floors 56 Annex H (normative) Temperatures of burn threshold 57 Annex I (n

28、ormative) Requirements for control guards (interlocking guard with start function).58 Annex J (informative) Splitting machines: Safety devices for feeding and processing area 59 DIN EN 13457:2010-10 EN 13457:2004+A1:2010 (E) 3 Annex ZA (informative) Relationship between this European Standard and th

29、e Essential Requirements of EU Directive 98/37/EC60 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“.61 DIN EN 13457:2010-10 EN 13457:2004+A1:2010 (E) Foreword This document (EN 13457:2004+A1:2010) has been prepared by Tec

30、hnical Committee CEN/TC 201 “Leather and imitation leather goods and footwear manufacturing machinery - Safety”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late

31、st by October 2010, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s

32、uch patent rights. This document includes Amendment 1, approved by CEN on 2010-03-18. This document supersedes EN 13457:2004. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! “. This document has been prepared under a mandate given to CEN by the Euro

33、pean Commission and the European Free Trade Association, and supports essential requirements of EU Directives. !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standa

34、rds organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po

35、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 4 DIN EN 13457:2010-10 EN 13457:2004+A1:2010 (E) Introduction !deleted text“ This document is a type C standard as stated in !EN ISO 12100“. The machinery concerned and the extent to which hazards, hazardous

36、situations and events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A and B standards, the provisions of this type C standard take precedence over he provisions of the other standards, for informatio

37、n for use and maintenance according to the provisions of this type C standard. !deleted text“ 5 DIN EN 13457:2010-10 EN 13457:2004+A1:2010 (E) 1 Scope 1.1 This document applies to splitting, skiving, edge trimming, strip cutting, cementing and cement drying machines used in the manufacture of footwe

38、ar, leather and imitation leather goods and other related components. 1.2 This document does not apply to: trimming machines with rotary milling tool for the purpose of trimming edges of material, see EN 930; splitting and band knife machines used in tanneries, see EN 13112; portable machines. 1.3 T

39、his document specifies safety requirements for construction, transport, installation, adjustment, setting, teaching or process change-over, operation, cleaning, maintenance, decommissioning, dismantling and, as far as safety is concerned, disposal for machines mentioned in 1.1. It takes account of i

40、ntended use !, foreseeable misuse“, component and system failure. 1.4 This document deals with significant hazards relevant to the footwear, leather and imitation leather goods manufacturing industries. (For a list of hazards see Clause 4.) The document does not deal with precise technical measures

41、for reducing the risks of fumes and dusts detrimental to health. The use of machines falling within the scope of this document for purposes other than those specified in 1.1, may give rise to hazards not considered during its preparation. 1.5 This document also applies to equipment for material hand

42、ling and operations which are an integral part of the machine. 1.6 This document assumes the machines are operated by adequately trained persons are used with adequate workplace lighting conforming the local regulations or to EN 12464-1. !deleted text“ 1.7 !This document is not applicable to splitti

43、ng, skiving, edge trimming, strip cutting, cementing and cement drying machines which are manufactured before the date of its publication as EN.“ 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition c

44、ited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. !deleted text“ !EN 349:1993“, Safety of machinery Minimum gaps to avoid crushing of parts of the human body !deleted text“ !EN 547-1:1996“, Safety of machinery Human body measureme

45、nts Part 1: Principles for determining the dimensions required for openings for whole body access into machinery 6 DIN EN 13457:2010-10 EN 13457:2004+A1:2010 (E) !EN 547-2:1996“, Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access opening

46、s !deleted text“ !EN 614-1:2006“, Safety of machinery Ergonomic design principles Part 1: Terminology and general principles EN 626-1:1994, Safety of machinery Reduction of risks to health from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturer

47、s !EN 626-2:1996, Safety of machinery Reduction of risk to health from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures“ !deleted text“ !EN 894-2:1997“, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2

48、: Displays !EN 894-3:2000“, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 953:1997, Safety of machinery Guards General requirements for the design and construction of fixed and movable guards !deleted text“ EN 982:1996, Safe

49、ty of machinery Safety requirements for fluid power systems and their components Hydraulics EN 983:1996, Safety of machinery Safety requirements for fluid power systems and their components Pneumatics !EN 999:1998“, Safety of machinery The positioning of protective equipment in respect of approach speeds of parts of the human body EN 1005-2:2003, Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery E