DIN EN 13530-2-2003 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2 Design fabrication inspection and testing German version EN 13530-2 2002《低温容器 大容量可运输真空.pdf

1、DEUTSCHE NORM Januarv 2003 DIN Cryogenic vessels - Large transportable vacu u m-i nsu lated vessels EN 13530-2 Part 2: Design, fabrication, inspection and testing English version of DIN EN 13530-2 ICs 23.020.40 Kryo-Behlter - Groe ortsbewegliche, Vakuum-isolierte Behlter - Teil 2: Bemessung, Herstel

2、lung und Prfung European Standard EN 1530-2 : 2002 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 268 Cryogenic vessels (Secretariat: France). The responsible German body involved in its preparation was the Normena

3、usschuss Druckgasanlagen (Pressure Vessels Standards Committee). EN comprises 98 pages. O No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN 13530-2 : 2003-01 DINDeutsches Institut frNormung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the excl

4、usive right of sale for German Standards (DIN-Normen). English price group 27 Sales No. 7 727 05.03 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13530-2 September 2002 ICs 23.020.40 English version Cryogenic vessels - Large transportable vacu u m - i nsu lat ed vessels Part 2: Design, fabric

5、ation, inspection and testing Rcipients cryogniques - Grands rcipients transportables, isols sous vide - Partie 2: Conception, fabrica- tion, contrle et essai Prfung Kryo-Behlter - Groe ortsbeweg- liche, Vakuum-isolierte Behlter - Teil 2: Bemessung, Herstellung und This European Standard was approve

6、d by CEN on 2002-05-29. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stand-

7、ards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the

8、 Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer- la

9、nd, and the United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Management Centre: rue de Stassart 36, B-1050 Brussels O 2002. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national member

10、s. Ref. No. EN 13530-2 : 2002 E Page 2 EN 13530-2 2002 Contents Page Foreword 3 1 2 3 3.1 3.2 4 4.1 4.2 4.3 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 6 6.1 6.2 6.3 6.4 6.5 Scope 4 Normative references 4 Terms. definitions and symbols . 5 Terms and definitions 5 Design . 7 Design options . 7 Common design requir

11、ements . 8 Design by calculation 13 Fabrication 54 General 54 Cutting . 54 Symbols 6 Cold forming . 54 Hot forming . 55 Manufacturing tolerances . 56 Non-welded joints 62 Production control test plates 64 Welding . 61 InSpeCtiOn and testing . 63 Quality plan . 63 Non-destructive testing . 65 Rectifi

12、cation 67 Pressure testing $8 Annex A (informative) Elastic stress analysis 69 Annex C (normative) Pressure strengthening of vessels from austenitic stainless steels 81 Annex D (informative) Specific weld details . 92 Annex B (normative) Additional requirements for 9 % Ni steel 79 Annex E (normative

13、) Increased material property for austenitic stainless steel . 96 Annex F (informative) Outer jacket relief devices 97 Bibliography 98 Page 3 EN 13530-2 2002 Foreword This document EN 13530-2:2002 has been prepared by Technical Committee CEN/TC 268 “Cryogenic vessels“, the secretariat of which is he

14、ld by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest by March 2003. The European Standard has been submitted

15、 for reference into the RID and/or in the technical annexes of the ADR. Therefore the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/

16、or in the technical annexes of the ADR. EN 13530 consists of the following parts under the general title, Cryogenic vessels - Large transportable vacuum insulated vessels: - Part I: Fundamental requirements - Part 2: Design, fabrication, inspection and testing - Part 3: Operational requirements The

17、annexes A, D and F are informative, the annexes B, C and E are normative. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germa

18、ny, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 4 EN 13530-2 2002 1 Scope This European Standard specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum ins

19、ulated cryogenic vessels of more than 1 O00 I volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road. However, it can be used for other mode of transport providing the specific regulations/requirements are complied with. This Eu

20、ropean Standard applies to large transportable vacuum insulated cryogenic vessels for fluids specified in EN 13530-1 :2002 and does not apply to vessels designed for toxic fluids. This European Standard does not include the general vehicle requirements e.g. running gear, brakes, lighting etc. that s

21、hould be in accordance with the relevant standardclregulations. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed he

22、reafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 287-1 :

23、1992, Approval testing of welders - Fusion welding - Part I: Steels. EN 287-2: 1992, Approval testing of welders - Fusion welding - Part 2: Aluminium and aluminium alloys. EN 288-3: 1992, Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for th

24、e arc welding of steels. EN 288-4: 1992, Specification and approval of welding procedures for metallic materials - Part 4: Welding procedure tests for the arc welding of aluminium and its alloys. EN 288-8: 1992, specification and approval of welding procedures for metallic materials - Part 8: Approv

25、al by a pre- production welding test. EN 473:2000, Non-destructive testing - Qualification and certification of NDT personnel - General principles. EN 8751995, Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination. EN 895:1995. De

26、structive tests on welds in metallic materials - Transverse tensile test. EN 91 O: 1996, Destructive tests on welds in metallic materials - Bend tests. EN 1252-1 : 1998, Cryogenic vessels - Materials - Part I: Toughness requirements for temperatures below -80 “C. EN 1252-2:2001, Cryogenic vessels -

27、Materials - Part 2: Toughness requirements for temperatures between -80 “C and -20 “C. EN 141 8: 1997, Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanised and automatic welding of metallic materials. EN 1435: 1997, Non-destruc

28、tive examination of weld - Radiographic examination of weldedjoints. EN 1626:1999, Cryogenic vessels - Valves for cryogenic service. EN 1797:2001, Cryogenic vessels - Gadmaterial compatibility. Page 5 EN 13530-2 2002 EN 10028-4:1994, Flat products made of steels for pressure purposes - Part 4: Nicke

29、l alloy steels with specified low temperature properties. EN 10028-7:2000, Flat products made of steels for pressure purposes - Part 7: Stainless Steels. EN 12300:1998, Cryogenic vessels - Cleanliness for cryogenic service. EN IS0 6520-1 : 1998, Welding and allied processes - Classification of geome

30、trical imperfections in metallic materials - Part I: Fusion welding (IS0 6520- I: 1998). EN 13068-3:2001, Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays. prEN 13445-3:1999, Unfired pressure vessels - Part 3

31、: Design. EN 13530-1 :2002, Cryogenic vessels - Large vacuum insulated vessels - Part I: Fundamental requirements. prEN 13648-3:2001, Cryogenic vessels - Safety devices for protection against excessive pressure - Pari 3: Determination of required discharge capacity and sizing for relief devices. IS0

32、 1 106-1 : 1984, Recommended practice for radiographic examination of fusion welded joints - Part I: Fusion welded butt joints in steel plates up to 50 mm thick. 3 Terms, definitions and symbols For the purposes of this European Standard, the following terms, definitions and symbols apply. 3.1 Terms

33、 and definitions For the purposes of this European Standard, the following terms and definitions apply in addition to those given in part 1 of this standard. 3.1.1 large transportable vacuum insulated vessel vessel of more than 1 O00 I volume intended for one or more cryogenic fluids, consisting of

34、an inner vessel, an outer jacket, all of the valves and accessories and additional framework 3.1.2 fixed tank (tank vehicle) large transportable vessel permanently attached to a vehicle or to units of running gear used in its stead 3.1.3 demountable tank large transportable vessel non permanently at

35、tached to a vehicle. When attached to the carrier vehicle, the demountable tank meets the requirements prescribed for a fixed tank. It is designed to be lifted only when empty 3.1.4 inner vessel pressure vessel proper intended to contain the cryogenic fluid 3.1.5 outer jacket gas-tight enclosure whi

36、ch contains the inner vessel and enables a vacuum to be established 3.1.6 automatic welding welding in which the parameters are automatically controlled. Some of these parameters may be adjusted to a limited extent, either manually or automatically, during welding to maintain the specified welding c

37、onditions Page 6 EN 13530-2 2002 3.1.7 maximum allowable pressure, ps maximum pressure for which the equipment is designed, as specified by the manufacturer, defined at a location specified by the manufacturer, being the location of connection of protecting or limited devices or the top of the equip

38、ment 3.1.8 relief platelplug plate or plug retained by atmospheric pressure only which allows relief of excess internal pressure 3.1.9 bursting disc device non-reclosing pressure relief device ruptured by differential pressure. It is the complete assembly of installed components including where appr

39、opriate the bursting disc holder 3.2 Symbols For the purposes of this European Standard, the following symbols apply. C allowance for corrosion mm di diameter of opening mm da outside diameter of tube or nozzle mm s narrow side of rectangular or elliptical plate mm b. “b buckling length mm n number

40、of lobes P design pressure as defined in 4.3.2.2 bar Pe allowable external pressure limited by elastic buckling bar pk strengthening pressure bar allowable external pressure limited by plastic deformation bar PP PT pressure test (see 4.2.3.2) bar r radius e.g. inside knuckle radius of dished end and

41、 cones mm S minimum thickness mm se actual wall thickness mm V factor indicative of the utilisation of the permissible design stress in joints or factor allowing for weakenings X (decay-length zone) distance over which governing stress is assumed to act mm A cross sectional area of reinforcing eleme

42、nt mm2 c. design factors D shell diameter mm Page 7 EN 13530-2 2002 Da Di E I Re Rnl K R S k sP Z V u 4 Design outside diameter e.g. of a cylindrical shell internal diameter e.g. of a cylindrical shell Youngs modulus moment of inertia of reinforcing element apparent yield stress or 0,2 % proof stres

43、s (1 % proof stress for austenitic steel) minimum tensile strength (actual or guaranteed) material property used for design radius of curvature e.g. inside crown radius of dished end safety factor at design pressure, in relation with Re safety factor against elastic buckling at design pressure safet

44、y factor against plastic deformation auxiliary value Poissons ratio out of roundness mm mm N/mm2 mm4 N/mm2 N/mm2 N/mm2 mm 4.1 Design options 4.1.1 General The design shall be carried out in accordance with one of the options given in 4.1.2,4.1.3 or 4.1.4. Metallic materials used at cryogenic tempera

45、tures shall meet the requirements of the relevant sections of EN 1252-1 : 1998 or EN 1252-2:2001. In the case of 9 % Ni steel, the additional requirements of annex B shall be satisfied. 4.1.2 Design by calculation Calculation of all pressure and load bearing components shall be carried out. The pres

46、sure part thicknesses of the inner vessel and outer jacket shall not be less than required by 4.3. Additional calculations may be required to ensure the design is satisfactory for the operating conditions including an allowance for dynamic loads. 4.1.3 Design by calculation and pressure strengthenin

47、g The pressure retaining capability of inner vessels manufactured from austenitic stainless steel, strengthened by pressure, shall be calculated in accordance with annex C. Page 8 EN 13530-2 2002 4.1.4 Design by calculation supplemented with experimental methods Where it is not possible to design by

48、 calculation alone planned and controlled experimental means may be used providing that the results confirm the safety factors required in 4.3. An example would be the application of strain gauges to assess stress levels. 4.2 Common design requirements 4.2.1 General The requirements of 4.2.2 to 4.2.

49、7 are applicable to all vessels irrespective of the design option used. In the event of an increase in at least one of the following parameters: - maximum allowable pressure; - specific mass (density) of the densest gas for which the vessel is designed; - maximum tare weight of the inner vessel; - nominal length and/or diameter of the inner shell; or, in the event of any change relative: - to the type of material or grade (e.g. stainless steel to aluminium); - to the fundamental shape; - to the decrease in the minimum mechanical properties of the material being used