DIN EN 1415-1997 Touch and close fasteners - Behaviour of slit selvedges German version EN 1415 1996《粘附锁紧件 切边性能》.pdf

1、DEUTSCHE NORM January 1997 Touch and close fasteners Behaviour of slit selvedges English version of DIN EN 1415 ICs 61 .O40 Descriptors: Touch and close fasteners, slit selvedges, testing. Haftverschlsse - Verhalten von Schnittkanten European Standard EN 1415:1996 has the status of a DIN Standard. A

2、 comma is used as the decimal marker. National foreword This standard has been prepared by CENTTC 248. The responsible German body involved in its preparation was the Normenausschu Textil und Textilmaschinen (Textiles and Textile Machinery Standards Committee). EN comprises 7 pages. O No part of thi

3、s standard may be reproduced without the prior permission of DIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, Berlin, has the exclusive right of sale for German Standards (DIN-Normen) Ref. No. D/NN1415:1997-01 Sales No. 1106 07.97 Price group 06 EUROPEAN STAN DAR D NORME EUROPENNE

4、EUROPISCHE NORM EN 1415 November 1996 ICs 61 .O40 Descriptors: Touch and close fasteners, slit selvedges, testing. English version Touch and close fasteners Behaviour of slit selvedges Fermetures auto-agrippantes - Tenue des lisires dcoupes Schnittkanten Haftverschlsse - Verhalten von This European

5、Standard was approved by GEN on 1996-09-14. CEN members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s

6、uch national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own languag

7、e and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and th

8、e United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels O 1996. CEN - All rights of exploitation in any form and by any means reserved worldwide for CEN national members. Ref.

9、No. EN 1415:1996 E Page 2 EN 1415:1996 Foreword This European Standard has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an id

10、entical text or by endorsement, at the latest by May 1997, and conflicting national standards shall be withdrawn at the latest by May 1997. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard:

11、 Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Page 3 EN 1415:1996 1 Scope This European Standard specifies a method for measuring the resistance to slipping of the t

12、hreads in a slit selvedge of a touch and close fastener tape. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed herea

13、fter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. EN 20139 Textiles - Standard atmosph

14、eres for conditioning and testing(IS0 139 : 1973) EN 10002-2 Tensile testing of metallic materials Part 2 : Verification of the force measuring system of the tensile testing machines 3 Definition For the purposes of this standard, the following definition applies: 3.1 Slit selvedge of a tape. The cu

15、t edge obtained by physical or chemical means. 4 Principle The force necessary to slide the warp threads out of the cut edge of the male or female tape of a touch and close fastener is measured in a direction perpendicular to the longitudinal axis of the tape. 5 Apparatus 5.1 Tensile testing machine

16、 according to EN 10002-2. 5.2 Clamping tool comprising a fixed part and a hinged part with pins (see figures 1 and 2) 5.3 Rule accurate to 1 mm 6 Test specimens Cut four test specimens one after the other. (42-01 ) mm long from the tape to be tested. Mark the samc selvedge of the four test specimens

17、 (see figure 3). 7 Conditioning Condition the test specimens for at least 24 h in accordance with the standard atmosphere for testing as specified in EN 201 39. The test shall be camed out in this atmosphere. Page 4 EN 1415:1996 8 Procedure Submit each test specimen to just one test. Open the clamp.

18、 Place the test specimen flat so that the selvedge to be tested is located against the support with its ends between the guides (see figure 4). Close the clamp and fix it in the top jaw of the tensile testing mache. Adjust the distance between the bottom part of the clamp and the top part of the bot

19、tom jaw of the tensile testing machine to 5 mm. NOTE. For tapes under 20 mm, the distance of 5 mm can be reduced. Fix the opposite selvedge into the bottom jaw of the tensile testing machine (see figure 5). Start up the tensile testing machine at a constant speed of (1 O0 i 10) identification of the

20、 touch and close fastener tapes; date of the test; the two arithmetic means obtained; any deviation from this European Sandard and any incident likely to have affected the result. - - - Page 5 EN 1415:1996 Figure 1: Clamping tool Dimensions in millimetres Sewing needle of diameter 0,6 mm cut to 9,25

21、 mm Upper jaw of tensile testing niacliine -Hinged part of clamping tool , support , Guide Lower jaw tensile testing machine Figure 2: Detail of pins in clamp Page 6 EN 1415:1996 Dimensions in millimetres Figure 3: Detail of pins in clamp Guide Test srnecimen Guide c 8 Test specimen Figure 4: Positioning of test specimen in clamping tool Page 7 EN 1415:1996 Dimensions in millimetres Test specimen Figure 5: Positioning of clamping tool and test specimen in the tensile testing machine