DIN EN 14303-2016 Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification German version EN 14303 .pdf

1、August 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%Y.M“2541142www.din.deD

2、IN EN 14303Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification;English version EN 14303:2015,English translation of DIN EN 14303:2016-08Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen

3、in der Industrie Werkmig hergestellte Produkte aus Mineralwolle (MW) Spezifikation;Englische Fassung EN 14303:2015,Englische bersetzung von DIN EN 14303:2016-08Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs base de laines minrales (MW)

4、 Spcification;Version anglaise EN 14303:2015,Traduction anglaise de DIN EN 14303:2016-08SupersedesDIN EN 14303:2016-03www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 40 pages 07.16 2 A comma is used as

5、 the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given

6、therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14303:2013-04, may be used in parallel with this standard during a specified transition period whe

7、re such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14303:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The

8、 responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebstechnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard

9、 differs from DIN EN 14303:2013-04 as follows: a) an addition has been made to the foreword; b) 3.2.1 has been amended; c) an addition has been made to 3.2.2; d) a new Subclause 4.3.9 has been added; e) 5.3.2 has been amended; f) Clause 7 has been amended; g) Clause 8 has been amended; h) Annex A ha

10、s been amended; i) a new version of Annex ZA has been added. This standard differs from DIN EN 14303:2016-03 as follows: a) in the German version, the incorrect National Foreword has now been replaced by the correct one. Previous editions DIN EN 14303: 2010-04, 2013-04, 2016-03 DIN EN 14303:2016-08E

11、UROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14303 December 2015 ICS 91.100.60 Supersedes EN 14303:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification Produits isolants thermiques

12、 pour lquipement du btiment et les installations industrielles - Produits manufacturs base de laines minrales (MW) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation T

13、his European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe

14、rences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CE

15、N member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedoni

16、a, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISC

17、HES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14303:2015 EEN 14303:2015 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative

18、references 5 3 Terms, definitions, symbols, units and abbreviated terms . 7 3.1 Terms and definitions . 7 3.2 Symbols, units and abbreviated terms 9 4 Requirements 10 4.1 General . 10 4.2 For all applications 10 4.3 For specific applications 14 5 Test methods . 16 5.1 Sampling 16 5.2 Conditioning .

19、16 5.3 Testing 16 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.2 Product Type Determination (PTD) 20 7.3 Factory Production Control (FPC) 20 8 Marking and labelling . 20 Annex A (normative) Factory production control . 21 Annex B

20、(informative) Additional Properties . 25 B.1 General . 25 B.2 Density . 25 B.3 Flatness 25 B.4 Airflow resistivity 25 B.5 Dynamic stiffness . 25 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 27 ZA.1 Scope and relevant ch

21、aracteristics 27 ZA.2 Procedures for AVCP of factory made mineral wool products 29 ZA.3 CE Marking and labelling . 36 Bibliography . 38 DIN EN 14303:2016-08EN 14303:2015 (E) 3 European foreword This document (EN 14303:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating mater

22、ials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by Septe

23、mber 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14303:2009+A1:2013. This document is identifyin

24、g those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14303 are the following: a) an addition to the foreword; b) modification to 3.2.1; c)

25、 an addition in 3.2.2; d) a new 4.3.9; e) modification of 5.3.2; f) modification of Clause 7; g) modification of Clause 8; h) modification of Annex A; i) a new Annex ZA. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a

26、nd supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requ

27、irements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or the industrial installation projected or because of saf

28、ety regulations. This European Standard contains three annexes: Annex A (normative), Factory production control; Annex B (informative), Additional properties; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. DIN EN 14303:

29、2016-08 EN 14303:2015 (E) 4 This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20

30、/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the

31、 following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specificat

32、ion EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specif

33、ication EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products

34、Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory

35、made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Fa

36、ctory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national sta

37、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

38、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14303:2016-08 EN 14303:2015 (E) 5 1 Scope This European Standard specifies the requirements for factory made mineral wool products, which are used

39、for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately 0 C to + 800 C. Below an operating temperature of ambient, special means against water vapour diffusion and water accumulation by air flow might be required. Below an op

40、erating temperature of - 50 C, special tests regarding the suitability of the products in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured with or without facings or coatings, in the form of rolls, b

41、oards, slabs, mats, felts, quilts, wired mats, lamella mats, bevelled lags and pipe sections. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricate

42、d thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular applicatio

43、n. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,065 W/(mK) at 10 C are not covered by this standard. This European Standard does not cover products for in situ insulation (blowing or po

44、uring) or products for the insulation of the building structure. This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents, in whole or in part, are normatively referenc

45、ed in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Determination

46、 of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 826, Thermal insulating products for building applications - Determination of compression beh

47、aviour EN 1604, Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications - Determination of short term water absorption by partial immersion EN 120

48、86:2013, Thermal insulating products for building applications - Determination of water vapour transmission properties DIN EN 14303:2016-08 EN 14303:2015 (E) 6 EN 12667, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and hea

49、t flow meter methods - Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13162, Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification EN 13172:2012, The