DIN EN 14307-2016 Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification German ver.pdf

1、March 2016 English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N%R“2430247www.din.deDI

2、N EN 14307Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification;English version EN 14307:2015,English translation of DIN EN 14307:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechni

3、sche Anlagen in der Industrie Werkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) Spezifikation;Englische Fassung EN 14307:2015,Englische bersetzung von DIN EN 14307:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufactu

4、rs en mousse de polystyrne extrud (XPS) Spcification;Version anglaise EN 14307:2015,Traduction anglaise de DIN EN 14307:2016-03SupersedesDIN EN 14307:2013-04See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered autho

5、ritative.Document comprises 42 pages 03.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed i

6、n the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this docu

7、ment replaces, DIN EN 14307:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14307:2015) has bee

8、n prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dm

9、mstoffe fr betriebstechnische Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14307:2013-04 as follows: a) an addition has been made to the foreword; b) an addition has been made to 3.2.2; c) a new Subclause 4.3.8 has been added; d) 5.3.

10、2 has been amended; e) Clause 7 has been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14307: 2010-04, 2013-04 DIN EN 14307:2016-03EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14307 December 2015 ICS

11、91.100.60 Supersedes EN 14307:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles

12、 - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved b

13、y CEN on 24 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan

14、dards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and n

15、otified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

16、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC M

17、anagement Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14307:2015 EEN 14307:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, s

18、ymbols, units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviations used in this standa

19、rd . 10 4 Requirements 10 4.1 General . 10 4.2 For all applications 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire of the product as placed on the market 13 4.2.5 Durability characteristics . 13 4.3 For specific application

20、s 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13 4.3.3 Minimum service temperature . 14 4.3.4 Compressive stress or compressive strength 14 4.3.5 Water vapour diffusion transmission properties 14 4.3.6 Short-term water absorption by partial immersion . 15 4.3.7 Trace quantities of wate

21、r soluble ions and the pH-value 15 4.3.8 Release of dangerous substances . 15 4.3.9 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 16 5.3.3 Reaction to fire 16 6 Designation code 18 7 Assessmen

22、t and Verification of the Constancy of Performance (AVCP) . 18 7.1 General . 18 7.2 Product Type Determination (PTD) 18 7.3 Factory Production Control (FPC) 19 8 Marking and labelling . 19 Annex A (normative) Factory production control . 20 Annex B (normative) Determination of the aged values of the

23、rmal conductivity . 22 DIN EN 14307:2016-03EN 14307:2015 (E) 3 B.1 Scope . 22 B.2 Procedure for XPS foam without diffusion tight laminates . 22 B.3 Procedure for XPS foam for use with diffusion tight facings on both sides . 23 B.4 Blowing agent . 23 Annex C (informative) Additional properties 24 C.1

24、 General . 24 C.2 Behaviour under cyclic loading . 24 C.3 Compressive modulus of elasticity . 24 C.4 Bending strength 24 C.5 Shear strength 24 C.6 Deformation under specified compressive load and temperature conditions 25 C.7 Compressive creep . 25 C.8 Tensile strength perpendicular to facings 26 C.

25、9 Long term water absorption by diffusion 26 C.10 Long term water absorption by immersion 26 C.11 Freezethaw resistance 27 C.12 Apparent density 27 C.13 Coefficient of thermal expansion 27 C.14 Closed cell content 27 Annex ZA (informative) Clauses of this European Standard addressing the provisions

26、of the EU Construction Products Regulation . 29 ZA.1 Scope and relevant characteristics 29 ZA.2 Procedures for AVCP of factory made extruded polystyrene foam products . 31 ZA.3 CE Marking and labelling . 38 Bibliography . 40 DIN EN 14307:2016-03EN 14307:2015 (E) 4 European foreword This document (EN

27、 14307:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

28、y June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such p

29、atent rights. This document supersedes EN 14307:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of

30、 EN 14307 are the following: a) an addition to the foreword; b) an addition in 3.2.2; c) a new 4.3.8; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This document has been prepared under a mandate given to CEN by the

31、 European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting

32、 entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equip

33、ment or the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of the aged values of thermal conductivity; Annex C (informative), Additional properties; D

34、IN EN 14307:2016-03EN 14307:2015 (E) 5 Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This standard includes a bibliography. This European Standard is one of a series of standards for insulation products used in buildin

35、g equipment and industrial installations, but this standard may be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards, setting 21 months after availability as the date o

36、f withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: E

37、N 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification

38、 EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14

39、307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocya

40、nurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made expanded polystyrene (EPS) products Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made pol

41、yethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equipment and industrial installations Factory made expanded

42、 perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

43、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14307:2016-

44、03EN 14307:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 C to + 75

45、 C. Below an operating temperature of - 50 C, special tests regarding the suitability of the material in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice should be heeded in all cases. The products are manufactured in the form of faced or unfaced boards, pipe

46、sections, segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels;

47、the performance of systems incorporating these products is not covered. This European Standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can

48、be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(mK) at a mean temperature of 10 C are not covered by this standard. This European Standard does not cover products intended to be used for the insulation of the building structure n

49、or for acoustical insulation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications - Det