DIN EN 14313-2016 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification German version EN .pdf

1、March 2016 English price group 17No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!%N%P“2430245www.din.deDI

2、N EN 14313Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification;English version EN 14313:2015,English translation of DIN EN 14313:2016-03Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anl

3、agen in der Industrie Werkmig hergestellte Produkte aus Polyethylenschaum (PEF) Spezifikation;Englische Fassung EN 14313:2015,Englische bersetzung von DIN EN 14313:2016-03Produits isolants thermiques pour lquipement du btiment et les installations industrielles Produits manufacturs en mousse de poly

4、thylne (PEF) Spcification;Version anglaise EN 14313:2015,Traduction anglaise de DIN EN 14313:2016-03SupersedesDIN EN 14313:2013-04See start of applicationwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises

5、 41 pages 03.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-03-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of t

6、he European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 14313

7、:2013-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14313:2015) has been prepared by Technical Com

8、mittee CEN/TC 88 “Thermal insulating materials and products” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Bauwesen (DIN Standards Committee Building and Civil Engineering), Working Committee NA 005-56-69 AA Dmmstoffe fr betriebstechnisc

9、he Anlagen in Gebuden und in der Industrie (SpA zu CEN/TC 88/WG 10). Amendments This standard differs from DIN EN 14313:2013-04 as follows: a) an addition has been made to the foreword; b) Clause 3 has been amended; c) a new Subclause 4.3.9 has been added; d) 5.3.2 has been amended; e) Clause 7 has

10、been amended; f) Clause 8 has been amended; g) Annex A has been amended; h) a new version of Annex ZA has been added. Previous editions DIN EN 14313: 2010-03, 2013-04 DIN EN 14313:2016-03EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14313 December 2015 ICS 91.100.60 Supersedes EN 14313:2009+A

11、1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse de polythy

12、lne (PEF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Polyethylenschaum (PEF) - SpezifikationThis European Standard was approved by CEN on 24 October 2015. CEN members are bound to comply with t

13、he CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manageme

14、nt Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status

15、 as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

16、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All

17、 rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14313:2015 EEN 14313:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols, units and abbreviated terms . 8 3.1 Terms and definition

18、s . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviated terms used in this standard 10 4 Requirements 10 4.1 General . 10 4.2 For all applica

19、tions 11 4.2.1 Thermal conductivity . 11 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 12 4.2.4 Reaction to fire of the product as placed on the market 12 4.2.5 Durability characteristics . 13 4.3 For specific applications 13 4.3.1 General . 13 4.3.2 Maximum service temperature . 13

20、 4.3.3 Minimum service temperature . 13 4.3.4 Water absorption . 14 4.3.5 Water vapour diffusion resistance 14 4.3.6 Trace quantities of water-soluble ions and the pH-value . 14 4.3.7 Structure-borne sound transmission . 15 4.3.8 Sound absorption . 15 4.3.9 Release of dangerous substances . 15 4.3.1

21、0 Continuous glowing combustion 15 5 Test methods . 15 5.1 Sampling 15 5.2 Conditioning . 15 5.3 Testing 16 5.3.1 General . 16 5.3.2 Thermal conductivity . 18 5.3.3 Reaction to fire 18 6 Designation code 19 7 Assessment and Verification of the Constancy of Performance (AVCP) . 19 7.1 General . 19 7.

22、2 Product Type Determination (PTD) 20 7.3 Factory Production Control (FPC) 20 8 Marking and labelling . 20 Annex A (normative) Factory production control . 21 DIN EN 14313:2016-03EN 14313:2015 (E) 3 Annex B (normative) Determination of minimum service temperature 23 B.1 Definitions . 23 B.2 Principl

23、e . 23 B.3 Apparatus 23 B.4 Test specimens 23 B.5 Procedure 24 B.6 Calculation and expression of results . 24 B.7 Test report 25 Annex C (informative) Additional properties 26 C.1 General . 26 C.2 Water vapour diffusion resistance . 26 C.3 Density 26 C.4 Compressive strength . 26 Annex ZA (informati

24、ve) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 28 ZA.1 Scope and relevant characteristics 28 ZA.2 Procedures for AVCP of factory made polyethylene foam (PEF) products 30 ZA.3 CE Marking and labelling . 37 Bibliography . 39 DIN EN 14313:20

25、16-03EN 14313:2015 (E) 4 European foreword This document (EN 14313:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publica

26、tion of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC sha

27、ll not be held responsible for identifying any or all such patent rights. This document supersedes EN 14313:2009+A1:2013. This document is identifying those clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main

28、technical changes that have been made in this new edition of EN 14313 are the following: a) an addition to the foreword; b) an addition in Clause 3; c) a new 4.3.9; d) modification of 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) a new Annex ZA. This

29、 document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of

30、 this document. Locally responsible authorities and contracting entities, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties out-side the provisions of this standard if this is technically necessary be

31、cause of prevailing operational conditions of the building equipment or the industrial installation projected or because of safety regulations. This European Standard contains four annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of minimum service tempera

32、ture; Annex C (informative), Additional properties; DIN EN 14313:2016-03EN 14313:2015 (E) 5 Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is one of a series

33、 of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed be-low as a European package of standar

34、ds, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation produc

35、ts, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made

36、flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installations Factory m

37、ade calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial installations Fac

38、tory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for buildin

39、g equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products for building equ

40、ipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Bel

41、gium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switz

42、erland, Turkey and the United Kingdom. DIN EN 14313:2016-03EN 14313:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating

43、 temperature in the range of approximately - 80 C to + 150 C. Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 C and - 80 C. The tensile stress should be kept at the minimum b

44、y applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure syst

45、ems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these

46、products is not covered. This standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Produ

47、cts with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see C.4). 2 Normative references The

48、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Th

49、ermal insulating products for building applications - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 1604, Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidi