DIN EN 14319-1-2013 Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) f.pdf

1、April 2013 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.100.60!$|I“1988938www.din.deDDI

2、N EN 14319-1Thermal insulating products for building equipment and industrialinstallations In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate(PIR) foam products Part 1: Specification for the rigid foam dispensed system beforeinstallation;English version EN 14319-1:2013,English tr

3、anslation of DIN EN 14319-1:2013-04Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnischeAnlagen in der Industrie An der Verwendungsstelle hergestellter Wrmedmmstoff aus Polyurethan (PUR)- undPolyisocyanurat (PIR)-Gieschaum Teil 1: Spezifikation fr das Schaumsystem vor dem Einbau;

4、Englische Fassung EN 14319-1:2013,Englische bersetzung von DIN EN 14319-1:2013-04Produits disolation thermique destins aux applications du btiment et aux installationsindustrielles Produits en mousse rigide de polyurthanne (PUR) et de polyisocyanurate (PIR) injecte,forms en place Partie 1: Spcificat

5、ions relatives aux systmes dinjection du polyurthanne et dupolyisocyanurate rigide avant mise en oeuvre;Version anglaise EN 14319-1:2013,Traduction anglaise de DIN EN 14319-1:2013-04Together with DIN EN 14315-1:2013-04, DIN EN 14315-2:2013-04, DIN EN 14318-1:2013-04,DIN EN 14318-2:2013-04, DIN EN 14

6、319-2:2013-04, DIN EN 14320-1:2013-04 and DIN EN 14320-2:2013-04supersedes DIN 18159-1:1991-12See start of applicationSupersedes: see belowwww.beuth.deDocument comprises 59 pagesTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.13 D

7、IN EN 14319-1:2013-04 2 A comma is used as the decimal marker. Start of application It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German

8、 Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN 18159-1:1991-12, may be used in parallel with this standard

9、 during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 14319-1:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and

10、 products” (Secretariat: DIN, Germany), Working Group WG 15 “In situ formed insulation products” (lead-management: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA

11、 005-56-60 AA Wrmedmmstoffe. This document is part of a package of interrelated standards for the specification of factory made thermal insulation products. Amendments This standard differs from DIN 18159-1:1991-12 as follows: a) EN 14319-1 supersedes DIN 18159-1:1991-12 covering in-situ polyurethan

12、e (PUR) foam applied by pouring. Previous editions DIN 18159-1: 1978-06, 1991-12 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14319-1 January 2013 ICS 91.100.60 English Version Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid po

13、lyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation Produits disolation thermique destins aux applications du btiment et aux installations industrielles - Produits en mousse rigide de polyurthanne (PUR) et de polyi

14、socyanurate (PIR) injecte, forms en place - Partie 1: Spcifications relatives aux systmes dinjection du polyurthanne et du polyisocyanurate rigide avant mise en uvre Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - An der Verwendungsstelle hergeste

15、llter Wrmedmmstoff aus Polyurethan (PUR)- und Polyisocyanurat (PIR)-Gieschaum - Teil 1: Spezifikation fr das Schaumsystem vor dem Einbau This European Standard was approved by CEN on 24 November 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

16、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists

17、 in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national stand

18、ards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slo

19、venia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide

20、for CEN national Members. Ref. No. EN 14319-1:2013: EEN 14319-1:2013 (E) 2 Contents Page Foreword . 4 1 Scope 5 2 Normative references . 5 3 Terms, definitions, symbols and abbreviations 6 3.1 Terms and definitions 6 3.2 Symbols and abbreviations . 8 4 Requirements . 9 4.1 General . 9 4.2 For all ap

21、plications . 10 4.3 For specific applications 12 5 Test methods 15 5.1 Sampling . 15 5.2 Conditioning . 15 5.3 Testing 15 6 Designation code . 18 7 Evaluation of conformity 18 7.1 General . 18 7.2 Initial type testing . 19 7.3 Factory production control 19 8 Marking, labelling and technical informat

22、ion 19 8.1 Marking and labelling . 19 8.2 Technical information 19 Annex A (normative) Determination of substrate adhesion strength perpendicular to faces . 21 A.1 Principle 21 A.2 Apparatus . 21 A.3 Test specimen 21 A.4 Test specimen preparation procedure 21 A.5 Test procedure . 21 A.6 Report . 21

23、Annex B (normative) Initial type testing (ITT) and Factory production control (FPC) . 23 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity 25 C.1 General . 25 C.2 Sampling and test specimen preparation . 26 C.3 Determination of the initial value of t

24、hermal conductivity . 26 C.4 Determination of the accelerated aged value of thermal conductivity 27 C.5 Fixed increment procedure 29 C.6 “Safe values” curve of aged thermal conductivity values versus temperature 32 Annex D (normative) Determination of the reaction profile and free-rise density 33 D.

25、1 Introduction 33 D.2 Principle 33 D.3 Apparatus . 33 D.4 Procedure . 33 D.5 Free-rise density 34 Annex E (normative) Test sample preparation method for the specimens for the thermal conductivity test . 35 E.1 Principle 35 DIN EN 14319-1:2013-04 EN 14319-1:2013 (E) 3 E.2 Procedure . 35 Annex F (norm

26、ative) Determination of the reference density . 36 F.1 Principle 36 F.2 Procedure . 36 F.3 Measurement of the reference density 36 Annex G (normative) Test sample preparation method for the test specimens other than for determining thermal conductivity 37 G.1 Principle 37 G.2 Procedure . 37 Annex H

27、(normative) Reaction to fire of the product . 38 H.1 Scope 38 H.2 Product and installation parameters . 38 H.3 Mounting and fixing . 39 H.4 Field of application . 41 Annex I (normative) Reaction to fire of the products in standardised assemblies simulating end-use applications . 43 I.1 Scope 43 I.2

28、Product and installation parameters . 43 I.3 Mounting and fixing . 44 I.4 Field of application . 47 Annex ZA (informative) Clause of this European Standard addressing the provisions of the EU Construction Products Directive . 50 ZA.1 Scope and relevant characteristics . 50 ZA.2 Procedure for attesta

29、tion of conformity of in-situ formed dispensed rigid polyurethane (PUR) and rigid polyisocyanurate foam (PIR) products 52 ZA.3 CE Marking and labelling . 55 Bibliography 57 DIN EN 14319-1:2013-04 EN 14319-1:2013 (E) 4 Foreword This document (EN 14319-1:2013) has been prepared by Technical Committee

30、CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2013, and conflicting national standards shall

31、be withdrawn at the latest by July 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a manda

32、te given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard consists of two parts which

33、form a package. The first part is the harmonised part satisfying the mandate and the CPD and is the basis for the CE marking covering the products, which are placed on the market. The second part, which is the non-harmonised part, covers the specification for the installed products. Both parts need

34、to be used for the application of the insulation products in the end-use applications covered by EN 14319. This European Standard is one of a series for expanded perlite, exfoliated vermiculite and polyurethane/polyisocyanurate in-situ formed insulation products used in building equipment and indust

35、rial installations, but this standard may be used in other areas where appropriate. The reduction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. EN 14319-1, Thermal

36、 insulating products for building equipment and industrial installations In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products consists of the following parts: Part 1: Specification for the rigid foam spray system before installation (the present document) Part 2:

37、Specification for the installed insulation products According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

38、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14319-1:2013-04 EN 14319-1:2

39、013 (E) 5 1 Scope This European Standard specifies requirements for in-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products for the insulation of building equipment and industrial installations, for example industrial storage vessels, pipes and ducts used for the s

40、upply of fuels, oil, other liquids, hot and cold water, air and other gases. Depending on the type of foam products complying with this standard, they may have service temperature ranges which lie within the limits of 200 C. This Part 1 of this European Standard is a specification for the rigid foam

41、 system before installation. Part 1 of this European Standard describes the product characteristics and it includes procedures for testing, marking and labelling and the rules for evaluation of conformity. This European Standard does not specify the required levels of all properties to be achieved b

42、y a product to demonstrate fitness for purpose in a particular end-use application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not cover factory made rigid polyurethane or polyisocyanurate foam insulation products or in-situ products

43、intended to be used for the insulation of buildings. This European Standard does not specify performance requirements for direct airborne sound insulation and acoustic absorption applications. NOTE Foam products are either called flexible or rigid. The flexible products are used in upholstery and ma

44、ttresses and are characterised by their ability to deflect, support and recover to their original thickness continually during their in-use phase. Those that are not flexible are termed rigid and do not possess these flexible characteristics. They are mostly used for thermal insulation purposes and

45、vary widely in their compression strength values. Once the cell structure is crushed in a rigid foam, it does not recover its thickness fully. Some of these rigid foams are very low in density with very low compression strengths and are sometimes described “commercially” as “soft foams” or “semi-rig

46、id” foams. This note has been included to clarify that all foams with such descriptions are covered by this standards used of the term rigid foam. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicatio

47、n. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 312, Particleboards Specifications EN 508-1, Roofing products from metal sheet Specification for self-supporting products of steel, al

48、uminium or stainless steel sheet Part 1: Steel EN 520, Gypsum plasterboards Definitions, requirements and test methods EN 823, Thermal insulating products for building applications Determination of thickness EN 826:1996, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applications Determination of the apparent density EN 1604, Thermal insulating products for building applications Determinatio